Kampfer's PLSK (Pliersless Sidekick)
-
I am removed the plier and used the pivot post and original bolt to bolt the plier to the tool I wanted to grind the back off of. This way I lined everything up, 'clamped/bolted' it all together and ground it nice and smooth and easy with a dremel. I used the plier as a guide to get perfect angles and 'template'.
I'll post some pictures what i'm talking about later tonight some time. -
@Franimal said:
I am removed the plier and used the pivot post and original bolt to bolt the plier to the tool I wanted to grind the back off of. This way I lined everything up, 'clamped/bolted' it all together and ground it nice and smooth and easy with a dremel. I used the plier as a guide to get perfect angles and 'template'.
I'll post some pictures what i'm talking about later tonight some time.Please do post photos, love to see em
-
The flat head is made of 420HC, your hand file might be smurfed by it, be ware.
Thanks for the info.
So did you grind the piece that you use to open the tool? Like where it would hit the handle?
Yes I did, otherwise the drivers would be 15* off.
Good deal.
Going to need a better file I think. Time to make a trip to the mechanics.
The Harley has started modding?

-
I am removed the plier and used the pivot post and original bolt to bolt the plier to the tool I wanted to grind the back off of. This way I lined everything up, 'clamped/bolted' it all together and ground it nice and smooth and easy with a dremel. I used the plier as a guide to get perfect angles and 'template'.
I'll post some pictures what i'm talking about later tonight some time.Please do post photos, love to see em
Here you go! Wow, i must have been over excited for that post. Even i couldn't follow along with what the hell i wrote!
Pictures are worth a thousand words...



The plier is sandwich between the parts i need to shape using the pivot post. I am going to hit it with a dremel and hope for magic
-
[quote author=Kampfer link=topic=56587.msg1031077#msg1031077 date=1422421072]
The flat head is made of 420HC, your hand file might be smurfed by it, be ware.Thanks for the info.
So did you grind the piece that you use to open the tool? Like where it would hit the handle?
Yes I did, otherwise the drivers would be 15* off.
Good deal.
Going to need a better file I think. Time to make a trip to the mechanics.
The Harley has started modding?

[/quote]Started yes, finished no.
-
[quote author=HarleyXJGuy link=topic=56587.msg1031080#msg1031080 date=1422421635]
[quote author=Kampfer link=topic=56587.msg1031077#msg1031077 date=1422421072]
The flat head is made of 420HC, your hand file might be smurfed by it, be ware.Thanks for the info.
So did you grind the piece that you use to open the tool? Like where it would hit the handle?
Yes I did, otherwise the drivers would be 15* off.
Good deal.
Going to need a better file I think. Time to make a trip to the mechanics.
The Harley has started modding?

[/quote]Started yes, finished no.
[/quote]What is the hold up?

-
@Franimal said:
Here you go! Wow, i must have been over excited for that post. Even i couldn't follow along with what the hell i wrote!
Pictures are worth a thousand words...The plier is sandwich between the parts i need to shape using the pivot post. I am going to hit it with a dremel and hope for magic
Good pics bro, shows the difference nicely.

-
[quote author=Kampfer link=topic=56587.msg1031083#msg1031083 date=1422422178]
[quote author=HarleyXJGuy link=topic=56587.msg1031080#msg1031080 date=1422421635]
[quote author=Kampfer link=topic=56587.msg1031077#msg1031077 date=1422421072]
The flat head is made of 420HC, your hand file might be smurfed by it, be ware.Thanks for the info.
So did you grind the piece that you use to open the tool? Like where it would hit the handle?
Yes I did, otherwise the drivers would be 15* off.
Good deal.
Going to need a better file I think. Time to make a trip to the mechanics.
The Harley has started modding?

[/quote]Started yes, finished no.
[/quote]What is the hold up?

[/quote]The little files I have are not up to the job. have not got around to "borrowing" some from the mechanics.
Been busy around here.
-
Excellent work

-
So I scored some files from the mechanics and am making some progress. Got the phillips and flathead sorted where they will go on the tool but they will not close.
Guessing a good little bit of the back end area needs to be ground off?
-
@HarleyXJGuy said:
So I scored some files from the mechanics and am making some progress. Got the phillips and flathead sorted where they will go on the tool but they will not close.Guessing a good little bit of the back end area needs to be ground off?
WIll not close or will not open all the way?
Yes, the back end of nail piece needs to be grind off a bit. -
So I scored some files from the mechanics and am making some progress. Got the phillips and flathead sorted where they will go on the tool but they will not close.
Guessing a good little bit of the back end area needs to be ground off?
WIll not close or will not open all the way?
Yes, the back end of nail piece needs to be grind off a bit.Both actually. Just need to grind off some more from the nail piece like you said.
Made some good progress tonite and I got it to close but it is still to tight. More grinding needed.
No hurry with this since it gives me something to do while I sit around beautiful Afghanistan.
-
If you can join the pieces together like i took a picture above, you can quickly get to a better fit. the 'roundness' of the plier is what you are shooting for to be able to have tools work smoothly on that side of the handle...While also having the friction/tension piece in place.
-
@Franimal said:
If you can join the pieces together like i took a picture above, you can quickly get to a better fit. the 'roundness' of the plier is what you are shooting for to be able to have tools work smoothly on that side of the handle...While also having the friction/tension piece in place.Thanks new guy.
Was kinda thinking that is how it should work. Using a hand file and taking my time but will get there eventually.
Got both drivers to the point where they attach and will open and close. Still need to take more off so the tension is right and they will be in line with the handle.
-
My apologies if I was missing a big chunk of background in the conversation. Am excited to get into this hobby myself and getting antsy on posting things :) And certain phone apps makes it so easy to post progress pics and rapid replies!
-
nice, do the drivers "click"?
-
Kampfer - can you walk me through the steps of making that awl? Specifically, when did you stop grinding / start filing / start with the sharpening stone? I still need to figure out the specifics but at some point I want to try making my Wingman blade in to a bigass awl to replace the MUT carbon scraper. Oh...and i'd like to do it with a Dremel as I don't have a real grinder.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
