What Did You Use Your Multitool For Today?
-
@HarleyXJGuy said:
Used Little Boy to help blow some smurf up.

-
The zipper handle on my winter jacket fell apart so I took a large paper clip and made my own zipper handle. I used my electrician scissors to cut the excess part of the paper clip off of it.
-
I used the tip of a Gerber MP600 bladeless pliers to open a 2-piece plastic food container. I could not get a good enough grip with my fingers.

-
The handle broke while I was tossing ...

I forgot to take a pic of the mess, used the Wave to hold the pan. It was a very hot pan.

-
Installed some lights on the truck. Skeletool stripped wire, tightened bolts, and trimmed zip ties.
And scraped across concrete more than I'd like.

-
Used the Or ST to try and tighten a nut on a pair of tin snips. As the nut would not budge I quit before I rounded off the nut.
-
Dashboard tools got some use today. Used the pin on a CT34 to unclog my windscreen washers. Tried to use it to realign them too, but it just bent the pin. Ended up using the point of the Core's can opener to lever them into position, and the pliers to help straighten out the pin
-
Installed new license plate lights. I don't know what the buzz is about blocking the numbers during a photo???
-
An elderly widow asked me for help as I was walking past her house today. She needed to replace the 9 volt battery in her garage door operator's outside keypad, but the battery door was stuck shut.
I used a Leatherman #2 pry tool to pry open the battery door. Then, I employed the Gerber MP600's pliers to widen the contact on the replacement battery so it would snap onto the connector properly.
-
I used my new Swisstool a few times today, which is unusual for me. Also, the majority of the uses were only possible due to the ability to extend the handles for extra reach, which is one of my primary preferences in a MT overall. I used the awl and extended handle to spear and pick up a piece of food I dropped on the floor under my desk. Used the file with extended handle to attempt to reach an envelope jammed up in our mail folding/inserting machine. Also used the phillips driver with extended handle to reach an itch on my back. I opened a few boxes with the blades.
-
Making stir fry and the hotel knife couldn't cut it...

Sent from Rura Penthe
-
@turnsouth said:
Making stir fry and the hotel knife couldn't cut it...Hope you're keeping well mate.

-
@NKlamerus said:
Installed new license plate lights. I don't know what the buzz is about blocking the numbers during a photo???Me either.
Of course I used Monrogue's license plate number to track where he lives so there is that.
-
I needed sharp scissors for precise trimming of fletching tape and feathers. As far as multitools go, nothing beats SAK scissors.
Hail to the king, baby.

-
Installed new license plate lights. I don't know what the buzz is about blocking the numbers during a photo???
Me either.
Of course I used Monrogue's license plate number to track where he lives so there is that.
You didn't have to do that.....just check the Members Map ;)
Sent from my XT901 using Tapatalk
-
Today was a busy day doing things around the house after a night of very little sleep - mainly for my wife. Our house has a new ruler you see, this little milk vampire below. He is five weeks old now. Things are different with him around and we’re still adjusting.
I used these to accomplish the tasks at hand. There’s a ball of string and a pair of 180mm Knipex Cobra water pump pliers missing from the picture, you have to take my word for those.
We need all the extra space we can get in the kitchen so I got this plastic basket from the fruit market to make something for storing fruits and vegetables outside in the balcony. I used an old plastic sack cut to size, some string to attach the pieces on 3 of the basket’s sides, two pieces of a broken marble slate I had laying around for added stability and some Velcro tape to make a sort of lid for this contraption. This project is not finished yet, it works fine but needs refining. The Swisstool did perfectly well. That awl is sharp, it could cut the fabric evenly to enlarge the holes it put on it.
To be continued..



-
Then it was time to install our new electric appliance in the kitchen. It’s a Hoover stick vacuum cleaner. There are some holes on the tiles already so I used the SwissTool’s Phillips screwdriver to set one screw on the charger / holder’s upper side and the PE blade to cut some Velcro tape and fix the charger / holder’s lower side. Using the Velcro tape here was somewhat tricky. The SwissTool did perfectly well.
Finally, it was time to remove our old washing machine because the new one is supposed to arrive tomorrow. The Swisstool opened the lid covering the cables that power up the unit and undid the screws keeping said cables in place. This machine is about 25 five years old. Here’s where the Cobra was needed. Totally recommended tool
The SwissTool did perfectly well.Sorry for the long post.


-
You gave that Swisstool a good workout I'd say. A new baby certainly is an adjustment ;). Hope all is going well buddy :)
Sent from my XT901 using Tapatalk
-
Nothing. Nadda, zip, squirt, dry hump, zilch.
Same thing since almost everyday since I got moved into the TOC. Lame.
Starting to feel like Kam or Monrogue.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login