Wenger Modding Question
-
To paraphrase what they say on the radio call-in shows, long-time lurker, first-time poster.
In preparation for trying to do a mod for myself, I have been unable to find any directions, textual, pictorial or video, for removing the scales from Wenger SAKs, specifically the 65mm variety. I know it is different from Victorinox scales and involves some sort of sliding of holders on the scales under projections on the outside but I don't have a Wenger yet so I don't want to break a scale removing it when the time comes. Can someone who has done it describe the process or post pics/video if available? It could be a valuable addition to the modding stickies. Thanks.
-
Welcome! If you tell us what is the model you're working on, I bet it will be easier to provide a correct way to do it.

-
The Pocket Toolchest and the Swiss Clipper AT.
-
Welcome to the forum. lichan.

Same procedure with the Wenger 65mm scales as with standard Victorinox scales. Take the toothpick and tweezers out. Heat the scales up a bit under warm water or a hair dryer to loosen them, put a thin flathead screwdriver in the holes and gently lift them.

-
OK, thanks. I've already removed Victorinox scales and from looking at pictures online of see-through Wenger scales, they appeared to attach the same way but better safe than sorry.
-
The 65mm attach the same way. The 85mm use a different system
-
@enki_ck said:
The 65mm attach the same way. The 85mm use a different systemI have a fairly new Victorinox "Delmont Edition" (to my knowledge, that's the name for a Wenger after they were bought by Victorinox) and my 85 mm attaches just as the one pictured by you there.
The other thing I can see is that one of the flanges on each pin is now actually part of the pin so anyone wanting to add layers or who messes up the pins will have to source the flanges somewhere else. I'll post more statistics as I drill out the pins in my topic
-
The 65mm attach the same way. The 85mm use a different system
I have a fairly new Victorinox "Delmont Edition" (to my knowledge, that's the name for a Wenger after they were bought by Victorinox) and my 85 mm attaches just as the one pictured by you there.
The other thing I can see is that one of the flanges on each pin is now actually part of the pin so anyone wanting to add layers or who messes up the pins will have to source the flanges somewhere else. I'll post more statistics as I drill out the pins in my topic
Yes, I know. ;) But this topic is titled and the OP asked about Wenger modding, not Victorinox Delemont modding.

Even the last few batches of Wengers had those pins you're referring to and the new Delemonts have too much differences from the scales, rivets and tools and so on so better left for a different thread.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login