Leatherman teasing the publis with a Charge mod?
-
@Xelkos said:
Well, those sports folks that had tools made to support & promote them, then there's David Cantebury where Leatherman showed as video of them modding a tool for him.
Oops, looks like the photo/post got pulled.
Those sports folks?

One tool for Dave years ago is hardly teasing.
Can you link to the pulled post please so we know where it was.There's a screen capture of it on MTOs Facebook.
You're kidding right.

-
@Xelkos said:
Well, those sports folks that had tools made to support & promote them, then there's David Cantebury where Leatherman showed as video of them modding a tool for him.
Oops, looks like the photo/post got pulled.
Those sports folks? :think:
One tool for Dave years ago is hardly teasing.
Can you link to the pulled post please so we know where it was.There's a screen capture of it on MTOs Facebook.
You're kidding right. :twak:
OK, here you go. :P
LM pulled the pic off of their FB wall so no linking to that one anymore.
-
[quote author=Xelkos link=topic=57445.msg1036058#msg1036058 date=1423257730]
Well, those sports folks that had tools made to support & promote them, then there's David Cantebury where Leatherman showed as video of them modding a tool for him.Oops, looks like the photo/post got pulled.
Those sports folks? :think:
One tool for Dave years ago is hardly teasing.
Can you link to the pulled post please so we know where it was.There's a screen capture of it on MTOs Facebook.
You're kidding right. :twak:
OK, here you go. :P
LM pulled the pic off of their FB wall so no linking to that one anymore.
[/quote]Oh I know where it is, just not going there. :P
-
[quote author=Xelkos link=topic=57445.msg1036058#msg1036058 date=1423257730]
Well, those sports folks that had tools made to support & promote them, then there's David Cantebury where Leatherman showed as video of them modding a tool for him.Oops, looks like the photo/post got pulled.
Those sports folks? :think:
One tool for Dave years ago is hardly teasing.
Can you link to the pulled post please so we know where it was.There's a screen capture of it on MTOs Facebook.
You're kidding right. :twak:
OK, here you go. :P
LM pulled the pic off of their FB wall so no linking to that one anymore.
[/quote]i saw it on their Instagram feed too. -
So... send my Charge TTi in for a warranty refit (like the original scales), buy a Rebar, and find a modder to give me a good price for a conversion?
:D -
Talk to B12, Babola or lobster boy.
-
@Xelkos said:
So... send my Charge TTi in for a warranty refit (like the original scales), buy a Rebar, and find a modder to give me a good price for a conversion?
:Dwhat exactly do you want done? Rebar pliers + awl in your TTi?
what needs to be replaced in your TTi? I probably have enough spare parts that you could skip the warranty part of the procedure...
-
@Xelkos said:
So... send my Charge TTi in for a warranty refit (like the original scales), buy a Rebar, and find a modder to give me a good price for a conversion?
:Dwhat exactly do you want done? Rebar pliers + awl in your TTi?
what needs to be replaced in your TTi? I probably have enough spare parts that you could skip the warranty part of the procedure...
• Serrated blade with the cut-hook has a lot of miles and scars on it. It had lost a fair amount of metal trying to find ways to sharpen it.
• Washer between the scissors & small screw driver is MIA.
• Used the flathead as a guide when putting the ST300 awl in, so it might have loose play - it's been in the ST300 so it won't go wondering off.
• Awl has seen a lot of wear & tear too. Though useable I'd want it replaced. Was my first tool swap attempt, and there's a dip where the threading loop is.For what I did, it worked. Not a clean mod by any means. Was getting ready to swap pliers for a spare Wave's pliers but kept getting side-tracked. Rebar pliers have far better wire cutters - which would really be useful. And I don't like the cap crimper on the pliers.
Not used the scissors much, so no lust lost there.
Have a Climber if I want real scissors. :D Climber also has the better can opener. -
Putting the Rebar Head in is really quite easy. I was reluctant at first, but with a butane torch, a good pair of locking pliers and two torx t10h bits it took me about 20 minutes!
-
Have the L bits. Guess I could try again. Don't have many distractions anymore, and a lot of time. If do it myself I can add the 90° locking notch to the large bit driver, which comes in handy at times.
It's them blasted washers that get the best of me, they don't stay put and are easily mangled. Where does one find replacement washers, those onion skin thin buggers?
-
@Xelkos said:
@Xelkos said:
So... send my Charge TTi in for a warranty refit (like the original scales), buy a Rebar, and find a modder to give me a good price for a conversion?
:Dwhat exactly do you want done? Rebar pliers + awl in your TTi?
what needs to be replaced in your TTi? I probably have enough spare parts that you could skip the warranty part of the procedure...
• Serrated blade with the cut-hook has a lot of miles and scars on it. It had lost a fair amount of metal trying to find ways to sharpen it.
• Washer between the scissors & small screw driver is MIA.
• Used the flathead as a guide when putting the ST300 awl in, so it might have loose play - it's been in the ST300 so it won't go wondering off.
• Awl has seen a lot of wear & tear too. Though useable I'd want it replaced. Was my first tool swap attempt, and there's a dip where the threading loop is.For what I did, it worked. Not a clean mod by any means. Was getting ready to swap pliers for a spare Wave's pliers but kept getting side-tracked. Rebar pliers have far better wire cutters - which would really be useful. And I don't like the cap crimper on the pliers.
Not used the scissors much, so no lust lost there.
Have a Climber if I want real scissors. :D Climber also has the better can opener.I personally don't agree with sending a tool in for warranty service after you have knowingly and willingly voided the warranty, but that decision is up to you.
Regarding the points that you listed:
-
the serrated blades with cutting hook are very hard to come by. (and they're not cheap, either.)
-
I have some spare washers in my parts stash.
-
I also have a spare flat driver.
-
if you're taking the plier head from a Rebar, you could take the awl as well. only a little grinding required.
@Xelkos said:
Have the L bits. Guess I could try again. Don't have many distractions anymore, and a lot of time. If do it myself I can add the 90° locking notch to the large bit driver, which comes in handy at times.I haven't tried this myself, but I don't think it would be too difficult. And I have a spare bit driver in case things go south quickly. :D
-
-
Ordered a Rebar, probably will be here in a couple of weeks since it is coming from the east coast. Yummy Electronics always seems to have the best prices on Leatherman tools. Have done business from them ages ago, and think is where I got my Charge TTi from.
Still searching for a replacement serrated blade. Might be a while on that, also checking out eBay for used Charges. Might be a while before acquiring the parts. Not in any hurry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login