Another BO knifeless mod
-
@50ft-trad said:
Thanks for bumping this, somehow I had missed it.
About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
Not showing the ends, Zoidie ... what is it you're wanting to see? Sequence of tools? If it's where you need to put the washers, that's a work in progress as the file is fouling on mine ;)
Yeah just the washer placement when you are done.

-
@50ft-trad said:
Thanks for bumping this, somehow I had missed it.
About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
Not showing the ends, Zoidie ... what is it you're wanting to see? Sequence of tools? If it's where you need to put the washers, that's a work in progress as the file is fouling on mine ;)
Yeah just the washer placement when you are done.

OK mate, I'll try to find time to have another play with this project at the weekend

-
Well,I got the Rebar rebuilt last night.
I used Al's tool load as a guide,but changed one or two things due to fit issues...
On one side,starting from the cutaway is two slim washers;file;slim washer;phillips;scissors;can opener.
The other side is large washer;saw;awl;bit driver;small screw driver
I went with the Rebars small flat driver simply because I didn't have a Fuse type to substitute. I'm still puzzled by this,because I'm sure I've got one some where

I just couldn't get a smooth enough operation of tools on the file side with the large flat driver,but the can opener is a slight thinner.
I'd been disappointed last night with the overall smoothness of movement of the tools,but I've been playing with it while writing,and while it's nowhere near as good as my modded Fuse or stock Blast,it's not all that bad. To be fair,I wasn't over impressed with it before hacking it

I'll post pics later.
I might pull out my Kick at the weekend,and have another look at things ???
I'm also considering going the whole hog and fitting Wave type pliers
That would make it Kirkys Fubar? -
I have Wave type pliers in mine already ... cap crimper ones as it happens. I'll have a play around with the load out when I get chance, as the file on mine was not just catching the handles, but the adjacent tool too ... although for some reason that didn't happen when I first built it, it kind of crept in afterwards ...
I'll have a faff around and see what happens. Thanks for the update John

-
No worries Al. Funnily,my file was catching and grating more last night than it did today. Gotta say though,getting into the guts of the Rebar hasn't endeared it to me in any way. It's just not as well built as the old PST or the Zytel tools
-
I've got to agree with you there mate. Those handles are covered in hotspots too. Mine will be getting slung in some form of kit for emergency use only. I really can't see any logical reason to subject myself to a Rebar on a regular basis, even though I've modded it to get rid of a lot of the issues
-
Some pics of the tool loadout on the Rebar
<a href="http://s782.photobucket.com/user/kirk130013/media/image.jpg5_zpsphf7izgi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy104/kirk130013/image.jpg5_zpsphf7izgi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/kirk130013/media/image.jpg4_zpscfmpwtrt.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy104/kirk130013/image.jpg4_zpscfmpwtrt.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/kirk130013/media/image.jpg6_zpswgno9vur.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy104/kirk130013/image.jpg6_zpswgno9vur.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/kirk130013/media/image.jpg3_zpswq8f3tl1.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy104/kirk130013/image.jpg3_zpswq8f3tl1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Looking good boys.
Gone are the days of the knifeless fuse being the only knifeless LM!
-
-
I've just been giving my Re-Furbed a couple of coats of looking at. The file was almost solid now the tools have "settled in", and most definitely needs an extra washer or two. I also note that you have dispensed with the large flat driver, which is fatter than the can opener you used instead, by roughly the thickness of the extra washer I need

As mine is a BO model, I have no interest in fitting/using the can opener (or certainly not of food packaging), which leaves me in a bit of a dilemma as to how to generate the extra internal space for the standoff washers. The most obvious solution (whilst maintaining the BO finish) is ditch the bit driver or phillips and a put the blades back in. I certainly don't have a shortage of knifeless tools and sub 3" slippie tools to choose from these days, and I'd still have the benefits of the semi-sensible pliers and scissors over the stock model.
-
My logic was,as you say,that the can opener is that bit thinner than the flat driver,and having the bit driver,I can always load up with a wide flat bit,well that and the fact I've a Pocketwrench fairly close to had at work for prying,which is mostly what I'd use the big driver for.
Besides,there's always some numpty in the lunch room who ends up needing a can opener

-
Full marks to you for your choice of tools. Sounds like you've got it completely sussed for your needs mate. I'm at a bit of a crossroads with this one, wondering how much effort it's worth, considering it'll still have the hotspots on the handles, and that slight cheap tinny feel to it.
-
That's almost the sad thing: I do know pretty much what I need! The Rebar,albeit in its current format is slight over kill(the saw).
-
Pity LM won't save us the effort
They did for a little while, been looking for a knifeless fuse forever, snagged one at the weekend, arrived today.
Needs a little clean, otherwise all good.
I prefer the look of the mods you guys are doing!
If it makes you feel better I ended up modding my Knifeless Fuse too :D
-
I've had a knifeless fuse tucked away NIB for a while now. Then I spent a fortune making my own knifeless variations. So far I have the stock bladeless fuse, my version with a different loadout (orange handles and BO tools), a MP400, a Kick, this Rebar and a Diesel. I also have plans for making my Wave bladeless, although I'm half tempted to leave the serrated blade in. I did that with a PST I originally made knifeless, and the serrated blade makes a nice companion knife to a dedicated folder or SAK. I think Kirky has more bladeless mods than me though
-
Hmmmm

There's the Fuse,the Kirkyclip ,2x KSTs,the Kick...oh yeah,the P.U.G...MP425,Diesel,and the MP600,now gifted to my flatmate,and there was a SOG PPP,since gifted and stolen.
Think that's it

-
50ft-trad: to free up the space you need, swap the Fuse small flat driver for the Rebar one. The Rebar small flat is the same thickness as the can opener, the Fuse one is the same thickness as the large flat driver.
FWIW my not-dissimilar Rebar-mod can be a bit loose/tight depending on mood. It's worth keeping the saw and file near the cut out otherwise you get really bad hotspots there, speaking from experience.
The Rebar is great at having lots of tools in a small package and coupled with a knife you get lots of tools and a knife that's comfortable to use. A Wave is bigger and heavier but means you don't have to carry the knife and it's far more comfortable to use the pliers on. However using a knife is a lot less comfortable.
-
Cheers Tom,
I've put the saw and file in the knife spots to fill the voids as it were. I think if was you that pointed out the Rebar small flat has a fat shank which means it struggles to get at some screws. You modded yours i believe, but if i did that, it would wreck the BO finish. Thats why I went for the driver from the Fuse.
My current thinking is to put all the washers on that side either side of the file, and let the rest of the tools clump. However, that of course will also ruin the finish, but not as badly as taking a grinder to it. I really need to take the tool apart again and take some measurements.
I think the tool has a lot more hotspots than the Fuse,not just at the cutouts but at the end of the handles and around the locks. It's a while since I carried my Wave, but I seem to think it's a lot more comfortable than the Rebar. Maybe I need to dig that out again too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
