Leatherman MUT Owners Club
-
@tommywp said:
Babola or others that have dyed the plastic - any tips? I've got the dye and my brand new MUT ready to go. Get the water boiling, throw in the dye and plastic for 15 minutes over a low flame, sit the plastic on a towel to cool? Or is there a better way? Any trick to removing the plastic pieces?It's easy, really. I died quite a few G-shocks in the past so it became a routine for me.
I use RIT fabric dye, dissolve a teaspoon of it in a pot of 1/2" boiling water I removed previously from the flame. Dip in the parts and wait for some 10-15 mins. Done.
Take the bits out from the liquid, and wash them on a tap.
To remove those 4 plastic bits just use your head and logic and go slowly. The side plastic parts (larger ones) are held by two screws on a side but are easy to figure out. If you get stuck let me know - enjoy the modding!

I went a little further on my MUT and decided to dip the pocket clip in OXY wash to get darker shade of gray and treated the bronze scraper/awl with Sulphur for aged bronze look.
I have few other mods in mind but they will have to wait for now 8)
Love my 'Black Ninja' MUT!


-
And my procrastination pays off! Thanks for the details!
-
Next time I'm making up a pot of dye my mut plastic is taking a dip.
I may just dunk my whole tool instead of taking it apart.
-
Hey Babola, the 'black ninja ' Mut looks awesome 8) gonna give that a go.....when I actually get one. Got the Rit in my flytying material arsenal already, just a matter of time now.
Jim
-
I may just dunk my whole tool instead of taking it apart.
That should work, too.
Hey balboa
I think we got mut modding madness.

Please explain how you darkened you clip.
Oxy wash?
Oxyclean or Napisan...tripple dunk...1st for 5mins then check, 2nd for 10 mins then check, 3rd for 20 mins. Make sure you start with the new solution every time in between, the effective oxidation is really only for first few minutes while the powder dissolves and froths up. It starts wearing off from then on.
Also, use boiled water for best results.
Let us know how it goes...cheers.
-
The hammer got some injuries today

.jpg)
-
-
I may just dunk my whole tool instead of taking it apart.
That should work, too.
Hey balboa
I think we got mut modding madness.

Please explain how you darkened you clip.
Oxy wash?
Oxyclean or Napisan...tripple dunk...1st for 5mins then check, 2nd for 10 mins then check, 3rd for 20 mins. Make sure you start with the new solution every time in between, the effective oxidation is really only for first few minutes while the powder dissolves and froths up. It starts wearing off from then on.
Also, use boiled water for best results.
Let us know how it goes...cheers.
Thanks Man.
I'll keep you posted.
-
Another owner here, while I don't consider it an EDC tool for me it is a great shooting kit tool for me, has a lot of tools that can handle field breakdowns on my guns and setting up my targets.
Now all I need is an AR-15/AR-10 to go with it :)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
GearsNTools
https://www.youtube.com/user/gearsNtools -
What were you whacking on to cause that to happen? Cracking skulls open?
GearsNTools
https://www.youtube.com/user/gearsNtools -
My MUT with plastic dyed, Swisscard scissors and tweezers, and punch ground to a small flat head screwdriver. (All great ideas from other forum members - thanks guys!)
Was able to loosen 4 of 5 test screws with the small flathead open to 90 degrees and my fingers gripping it so that the punch doesn't unscrew from the MUT (the 5th screw was very tight). Not perfect, but my main use for it will be to open battery compartments on toys so hopefully it's adequate.
If anyone has any ideas on how I could buy a steel version of the awl/scrapper, I'd love to hear them.


-
-
Hi,
Just show you my MUT EOD.
Love the design
This thing is monster!Im in the club now, i guess



-
Welcome to the forum.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





