Kampfer's Mini Surge (By Breezy12)
-
^ Great idea ! ^
-
Now if this could be done with a Charge TTi

• Am not totally sold on the cut-hook as I once was. Took a long time to find a better sharpening method that I lost a lot of material on the end. Still, it does come in handy at times.
• Like that the diamond file was designed like the Charge Saws are. I use a diamond file almost every day, would be hard pressed without having one. ~ I'd be using a Surge blade pouch with a saw (or two) on one side, poking the diamond file in the other.
• One thing I'd rather have instead of the normal can opener is a SAK push can opener. Have not once had metal splinters using a SAK can opener on any can, including those inferior cans. Can't say that with the Leatherman can openers, but the pliers do help to remove the metal splinters.
• And I really like the pliers with no cap crimper. So much lost real estate for straightening wire & metal with that pot hole there right smack in the road!
Now if I could order one.

-
@Xelkos said:
Now if this could be done with a Charge TTi
• Am not totally sold on the cut-hook as I once was. Took a long time to find a better sharpening method that I lost a lot of material on the end. Still, it does come in handy at times.
• Like that the diamond file was designed like the Charge Saws are. I use a diamond file almost every day, would be hard pressed without having one. ~ I'd be using a Surge blade pouch with a saw (or two) on one side, poking the diamond file in the other.
• One thing I'd rather have instead of the normal can opener is a SAK push can opener. Have not once had metal splinters using a SAK can opener on any can, including those inferior cans. Can't say that with the Leatherman can openers, but the pliers do help to remove the metal splinters.
• And I really like the pliers with no cap crimper. So much lost real estate for straightening wire & metal with that pot hole there right smack in the road!
Now if I could order one.

It can be done with a Charge. ;)
-
Wonder what would be required to get this done.
:DOh, the other thing I forgot... adding a notch on the large bit driver so it could be locked at a 90° angle.
Wonder if some SAK push can opener could be adapted to the Mini-Surge/Charge chassis?

-
@Xelkos said:
Wonder what would be required to get this done.
:DOh, the other thing I forgot... adding a notch on the large bit driver so it could be locked at a 90° angle.
Wonder if some SAK push can opener could be adapted to the Mini-Surge/Charge chassis?
If it didn't fit into or onto a handle it could probably fit into the large bit driver.
-
@Xelkos said:
Now if this could be done with a Charge TTi

• Am not totally sold on the cut-hook as I once was. Took a long time to find a better sharpening method that I lost a lot of material on the end. Still, it does come in handy at times.
• Like that the diamond file was designed like the Charge Saws are. I use a diamond file almost every day, would be hard pressed without having one. ~ I'd be using a Surge blade pouch with a saw (or two) on one side, poking the diamond file in the other.
• One thing I'd rather have instead of the normal can opener is a SAK push can opener. Have not once had metal splinters using a SAK can opener on any can, including those inferior cans. Can't say that with the Leatherman can openers, but the pliers do help to remove the metal splinters.
• And I really like the pliers with no cap crimper. So much lost real estate for straightening wire & metal with that pot hole there right smack in the road!
Now if I could order one.

It can be done with a Charge. ;)
That's a beauty !
-
;)
-
Thanks for the inspiration, I did these mods to both my wave (mini surge) and my charge TTI (Surcharge). I left the file in both and moded the saw to fit in where the belt clip goes as I can only remember using it twice in all my years.

-
-
Very cool Kamasaurus.
-
Glad you like it.
The cost was one Wave + Rebar + Wingman + Charge Tti.
At the end I have one kickass MT and three less than perfect MTs to gift out.The most expensive part was the cutting hook, I bought a Tti just for that.
-
You can just do a recharge with wingman scissor to cut the cost, but here in Europe it will be a more than 200€ tool .
100 for the tti (if you find one on this price...), 60 the rebar and 40 the wingman.
Quite an expensive tool, the rebar can be re used with the tti plier, but the wingman without wing... -
Some people just don't care, you give them a MT, they will look at it for about five seconds then throw it in the glove box.

-
This is the best mod i've ever seen on a Wave.

I'm still wait my Rebar and Wingman too

-
Awl it!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Thanks Steve. 
