What's on your keychain?
-
@pfrsantos said:
CHALLENGE!Maybe someone around here could try to transform these round holes into hexes, so as to fit the bits...

Unfortunately the round hole on Skele is too big for 1/4 hex bits.
-
As far as I'm concerned, lanyard holes should always be 1/4 inch hex holes! :D
I don't have the skills or the patience [a triangular needle file maybe?...hmm], but I've often thought this product would be so much nicer that way:
http://www.countycomm.com/_images/titaniumwidgy/widgymicro4large.jpg -
CHALLENGE!
Maybe someone around here could try to transform these round holes into hexes, so as to fit the bits...

Unfortunately the round hole on Skele is too big for 1/4 hex bits.
How about creating/finding a hex rod. The outer wall would be held against the reshaped hole, the inside would hold the bits.

Like this. Maybe there's not something like this small enough to use and creating one from scratch is too complicated to make.

-
CHALLENGE!
Maybe someone around here could try to transform these round holes into hexes, so as to fit the bits...

Unfortunately the round hole on Skele is too big for 1/4 hex bits.
How about creating/finding a hex rod. The outer wall would be held against the reshaped hole, the inside would hold the bits.

Like this. Maybe there's not something like this small enough to use and creating one from scratch is too complicated to make.

Oh man, you know what that would be good for, cut only like a 3/16" piece off and drill holes on each corner, and make it like one of those tec ufos like on this page..
</post/1016987>
JR -
Blue

-
Work keys
-
A home made paracord lanyard from bits found in hardware store.

The ball bearings look wicked. Definetly gonna do this.
What's the center peice? A spacer? Or smaller bearing?
Thanks, all three are miniature ball-bearings, not easy to find but if you look around on the Web you should be able to source them from few places. Just make sure the inner hole diameter is 5-6mm, any smaller and the fit will be super tight (paracord is 4mm in diameter, compressible to about 2.5-3mm...and you'll need two cords thru the ball bearing hole) any larger and the bearings/beads will flop and float up and down.
BTW, the copper ferrule on that lanyard is a 3mm steel wire end-stop. Internal dimensions are 3mmx6mm.
Hope this helps.
-
It's official: Leatherman Style PS is off the rotation. Scissors fail with almost no use at all, just by being closed.

Vic Signature Lite, coupled with Led Lenser K1 from now on.



-
Well, at least Leatherman should fix that for free under their "hassle free" 25 year warranty.
I've always liked the larger scissors on mini-Leathermans such as the original Micra, but for the smaller, fold-out designs I've always thought the Vic versions were better.
Babola, I meant to mention before, I really like the color coordination of the copper ferrule and that specific paracord you chose. Looks classy.
-
@mzil said:
Babola, I meant to mention before, I really like the color coordination of the copper ferrule and that specific paracord you chose. Looks classy.Thanks man, I don't know why the visual appearance and tactile experience matter to me in life in general, but it does and I can't help it. :P
-
@mzil said:
**
Well, at least Leatherman should fix that for free under their "hassle free" 25 year warranty.**I've always liked the larger scissors on mini-Leathermans such as the original Micra, but for the smaller, fold-out designs I've always thought the Vic versions were better.
Babola, I meant to mention before, I really like the color coordination of the copper ferrule and that specific paracord you chose. Looks classy.
I thought of that but just the cost of shipping the Style to the USA will be almost the same as buying a new one...
:-\ -
At Leatherman's site here's what they list for dealers after selecting Portugal:
Portugal
◦ J. ESTELLER S.L.
POL. IND. MOLI DELS FRARES, CARRER C, NUM. 34
SANT VICENC DELS HORTS.
08620 BARCELONA, Spain
Phone: +34 93-672-4510
Fax: +34 93-672-4511
info@esteller.comCould you send it to them? [I don't know how it works internationally.]
-
@mzil said:
At Leatherman's site here's what they list for dealers after selecting Portugal:Portugal
◦ J. ESTELLER S.L.
POL. IND. MOLI DELS FRARES, CARRER C, NUM. 34
SANT VICENC DELS HORTS.
08620 BARCELONA, Spain
Phone: +34 93-672-4510
Fax: +34 93-672-4511
info@esteller.comCould you send it to them? [I don't know how it works internationally.]
Thanks. I'll try to e-mail them first, with some pics of the Style. I'll see what they say.

-
As promised, here's the full length version with tutorial:
https://www.youtube.com/watch?v=xCbnId5sdjA -
Few pieces dear to my heart.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

