What Did You Use Your Multitool For Today?
-
@turnsouth said:
Making stir fry and the hotel knife couldn't cut it...Hope you're keeping well mate.

-
@NKlamerus said:
Installed new license plate lights. I don't know what the buzz is about blocking the numbers during a photo???Me either.
Of course I used Monrogue's license plate number to track where he lives so there is that.
-
I needed sharp scissors for precise trimming of fletching tape and feathers. As far as multitools go, nothing beats SAK scissors.
Hail to the king, baby.

-
Installed new license plate lights. I don't know what the buzz is about blocking the numbers during a photo???
Me either.
Of course I used Monrogue's license plate number to track where he lives so there is that.
You didn't have to do that.....just check the Members Map ;)
Sent from my XT901 using Tapatalk
-
Today was a busy day doing things around the house after a night of very little sleep - mainly for my wife. Our house has a new ruler you see, this little milk vampire below. He is five weeks old now. Things are different with him around and we’re still adjusting.
I used these to accomplish the tasks at hand. There’s a ball of string and a pair of 180mm Knipex Cobra water pump pliers missing from the picture, you have to take my word for those.
We need all the extra space we can get in the kitchen so I got this plastic basket from the fruit market to make something for storing fruits and vegetables outside in the balcony. I used an old plastic sack cut to size, some string to attach the pieces on 3 of the basket’s sides, two pieces of a broken marble slate I had laying around for added stability and some Velcro tape to make a sort of lid for this contraption. This project is not finished yet, it works fine but needs refining. The Swisstool did perfectly well. That awl is sharp, it could cut the fabric evenly to enlarge the holes it put on it.
To be continued..



-
Then it was time to install our new electric appliance in the kitchen. It’s a Hoover stick vacuum cleaner. There are some holes on the tiles already so I used the SwissTool’s Phillips screwdriver to set one screw on the charger / holder’s upper side and the PE blade to cut some Velcro tape and fix the charger / holder’s lower side. Using the Velcro tape here was somewhat tricky. The SwissTool did perfectly well.
Finally, it was time to remove our old washing machine because the new one is supposed to arrive tomorrow. The Swisstool opened the lid covering the cables that power up the unit and undid the screws keeping said cables in place. This machine is about 25 five years old. Here’s where the Cobra was needed. Totally recommended tool
The SwissTool did perfectly well.Sorry for the long post.


-
You gave that Swisstool a good workout I'd say. A new baby certainly is an adjustment ;). Hope all is going well buddy :)
Sent from my XT901 using Tapatalk
-
Nothing. Nadda, zip, squirt, dry hump, zilch.
Same thing since almost everyday since I got moved into the TOC. Lame.
Starting to feel like Kam or Monrogue.

-
@HarleyXJGuy said:
Nothing. Nadda, zip, squirt, dry hump, zilch.Same thing since almost everyday since I got moved into the TOC. Lame.
Starting to feel like Kam or Monrogue.

You should be so lucky ;)
Sent from my XT901 using Tapatalk
-
Tightened some allen fasteners on a scooter with the Surge and bit kit. Wave was used to cut denim and jute for charring.

-
Used the scissors on my Style CS to cut weatherstripping for the attic door.
-
@Monrogue said:
You gave that Swisstool a good workout I'd say. A new baby certainly is an adjustment ;). Hope all is going well buddy :)Sent from my XT901 using Tapatalk
Well, the SwissTool is a beast and those tasks were fairly easy. Still, it takes some amount of construction quality for tools to breeze through tasks. I got that ST from lowtech recently -thanks, man- as my go-to beater MT. Very handy

As for the little one, so far so good, my friend. He's having some trouble sleeping sometimes and we're already experiencing belly aches but in general I think the three of us are getting along well. Thank you for your concern. I trust you and the girls are doing well?

-
You gave that Swisstool a good workout I'd say. A new baby certainly is an adjustment ;). Hope all is going well buddy :)
Sent from my XT901 using Tapatalk
Well, the SwissTool is a beast and those tasks were fairly easy. Still, it takes some amount of construction quality for tools to breeze through tasks. I got that ST from lowtech recently -thanks, man- as my go-to beater MT. Very handy

As for the little one, so far so good, my friend. He's having some trouble sleeping sometimes and we're already experiencing belly aches but in general I think the three of us are getting along well. Thank you for your concern. I trust you and the girls are doing well?

Yeah, it is a beast, and I'm enjoying my new one as well, even though it's more than I need. Glad your family is doing well. Me and mine are doing fine as well buddy :)
Sent from my XT901 using Tapatalk
-
Used my Spirit to help install a new night latch on a gate here at work - made good use of the in line philips, the pry and the pliers. It's a lovely tool.
-
@Monrogue said:
Yeah, it is a beast, and I'm enjoying my new one as well, even though it's more than I need. Glad your family is doing well. Me and mine are doing fine as well buddy :)Yes, I saw you got a SwissTool and I've been meaning to tell you I think it's too much to carry around. I plan on using mine around the house and bringing it along on any trips by car I might take. As for EDC I'll stick to my Spirit.
I'm glad things are fine at home

-
I was bored last night so I made a sleeve for my EDC Pioneer. I'd been meaning to make one for some time.
I used a piece of leather, a piece of cotton-polyester ripstop cloth for lining, some waxed cotton jewelry cord and my Swisstool to pull the yarn needle through the materials. The scissors on the Moneyclip cut both the piece of leather and the ripstop cloth smoothly
The paper magazine pictured served as my workbench.At first I just meant to see how things would go with that needle as I intended to make something using two pieces of leather and ripstop but I realised that doing so would require much more detailed work. So, I didn't give it much thought. I worked on that thing for about 20 minutes, pushing the needle against the magazine and pulling it with the Swisstool.
This was my first attempt at working with leather and I must say I'm quite happy with the result even if it seems a little primitive.
As a side note, the SwissTool was very handy. I was afraid to use normal pliers for fear of breaking the needle. The SwissTool didn't leave any marks on it. I managed to push the wood saw enough to bend it and get it to become stuck under the pliers spring twice as I was pressing down on the handles. I'm almost certain the SwissTool's weight helped get the job done faster. I have a notion that the Spirit wouldn't do so well. I intend to find that out. Stay tuned




-
Fitting the AC vent in my mothers car.
From the factory it is clipped in place from the side of the occupants but because some one slammed on it it was pushed behind the dashboard, last time i tried it with my hands but i could not grip it hard enough. Friday i recieved my leatherman wave and tought i could try it again. This time i could pull it through while bending the clips inward. After that i clicked it in place and it fits like new.The small things in life is where an MT is for, that annoying plastic clip on some packaging materials, that knot that wont untie or the wheel of my bike that is pulled to one side because i put to much force on the pedals again. You wont restore a classic car with it.
Altough many of my friends tink it is supposed to do that. -
LOL.
I rarely use my MT's as they were designed, they usually get used prying or twisting, hammering, picking, whatever I need to get me out of whatever jam I'm in.
-
I rarely use my MT's as they were designed, they usually get used prying or twisting, hammering, picking, whatever I need to get me out of whatever jam I'm in.
I agree, when there is a problem they usealy are able to solve it.
Except for the two times i broke pliers and that time when i broke a saw.
I actually did restore a car partialy with a swisstool x.
Removed a lot of glue with the chisel and over torqued the thick flathead many times, i am still amazed that thing never broke on me.
I rarely use a dedicated tool, i always use a MT, even if that means they are going to have job where the desingers didn't itend them for.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login