The Leatherman c300
-
So I get this package in the mail from the Multitool.org satellite office in Georgia. I’m expecting a package from those guys but it’s only supposed to have a small pocket knife and this box is about six times to big. Lo and behold, look at what was inside!

Not only the c300 I won but quite a nice selection of swag too. I think someone has the same head size as I do; the hat fit perfectly right out of the box, first time that’s happened.
You may have heard that Leatherman, the Multi-tool guy, got into making pocket knives a few years ago. I did too, but never gave it much thought, the knives didn’t really offer me much compared to my Spyderco knives and seemed irrelevant for someone who always carries a multi-tool anyway. The c300 hasn't done much to change my opinion since it's the most basic model but I have been thinking about the concept and really think it's a good idea.
Here’s what I have found out about the c300. It’s the lowest end model in the line, has 420HC steel and is just a knife. No extra stuff.
Specs are here if you’re interested.
So how does it work? Just fine.






Lock-up is a little iffy depending on your liner-lock philosophy. There is only a little room for wear but some people find this favorable. Me, I like at least 25% extra space for movement from wear over time.
As far as ergonomics go it feels about average for this size of folder. No hotspots, no crazy ergonomics, just simple. The handle material feels good and seems to almost get more grippy when it gets wet.



The flipper has texture and is easy to engage. The mechanism is slightly different that anything I have seen before. It uses a seperate piece for the flipper that interacts with the blade in lieu of an extended flipping area on the tang.


I was very impressed by the grinds on this knife. I had fully expected to have to reprofile it before giving it any use but haven’t needed to with the acute angle from the factory. From the box it would shave hair with light pressure and had a slightly toothy edge. Edge holding seems on par with my Wave, I haven't used it enough to appreciably dull the edge.

All in all, not too bad. Nothing special, just simple and effective. I'm planning to try out a more advanced model in the future, I'm liking the way Leatherman does knives.Oh, and thanks MTO and LTG!

-
@Spoonrobot said:
Not only the c300 I won but quite a nice selection of swag too. I think someone has the same head size as I do; the hat fit perfectly right out of the box, first time that’s happened.I just got my (surprisingly large) box, and had the exact same experience with the hat... :D
Nice knife too.
-
Nice analysis. I especially appreciate the disassembly photos. :)
-
The flipper design looks interesting, still can't figure out how it works, guess I need to have one in my hands to do that.
-
The little bent tab on the inner area of the flipping washer pushes the blade open (the thing under the pocket clip is the flipping part). It's a pretty clever way to do it, reminds me of the CRKT LAWKS in a way.
I especially appreciate the disassembly photos
I cannot resist the urge. It's kind of funny that the liners have a mild, almost stone-washed polish while the blade is bead-blasted. Seems like the other way around would have been preferable from an aesthetic standpoint.
-
I can kinda see how it works. Does the tab fit into the hole between pivot and thumbstud on blade?
What's the cutout on butt end of locking liner for? I guess the black plastic piece goes there but does it do anything more than spacer?
-
I have the partially serrated version of the same knife, and I agree it's a great knife for the money.
While it may not be on par with some of Spyderco or Benchmade's offerings, the LM knives are significantly more affordable and are more than usable for day to day tasks. I only got mine initially because it came with the Blast I wanted, but I was very much impressed with it.
Def
-
Oh, and as for the hat thing... we use a special software protocol on the forum that measures the heads of all users and automatically produces a hat to fit you! :P It was an expensive option, and they all laughed at me when I commissioned it, but who's laughing now?
Def
-
Nope, I thought that at first too. The hole is for the stamped detent to keep the blade closed. The flipper rests against a section of the tang.
I suspect the liners are shared between all the 2.8" models so the cutout could be for the carabiner or the philips driver that is on the higher-end models.
Oh, and as for the hat thing... we use a special software protocol on the forum that measures the heads of all users and automatically produces a hat to fit you! Tongue It was an expensive option, and they all laughed at me when I commissioned it, but who's laughing now?
Def
Not me, money well spent my good man! :D
-
I keep hearing good things about Leatherman knives...my wishlist grows.
Oh, and are those Leatherman stickers on the white paper?
-
@gafftapegreenia said:
Oh, and are those Leatherman stickers on the white paper?Yup, I've got a couple stuck on my bike. It's to help prevent mechanical problems, I think it's working. :P
-
I think my laptop needs one of those stickers.
-
Great review mate, nice to see your prize stripped naked so soon :D
-
Very cool spoony
. I have a hankering for the e306/307LM . Great review again mate. More material for that book 
-
Very cool spoony
. I have a hankering for the e306/307LM . Great review again mate. More material for that book 
Get one, I am really impressed with mine. :)
Ben no encouragement please , I am no longer making penalty rates for work so tool $ has taken a big hit :( But I do have my tax return check >:D
-
Hi,
I have 30 of the first generation knives. These are clearly a "learn the market" bunch of designs. While I like them all, some are favored better than others. The ones that I carry the most are the e300, the e304x and the e306x (yes- I like plain edge blades).
After a few years in the market, Leatherman has learned a lot and is discontinuing the first generation knives. The Crater and Expanse lines, which will replace the first generation, have a more logical family grouping. I think these will be even more successful than the first generation.
Looking at inventory levels of the first generation knives at the bigger internet dealers, they are diminishing. If you want to be in a collectible knife family, I suggest you act pretty soon. Remember that there are some uncataloged specials which you can email me about.
All in all, I believe that Leatherman, unlike so many of our tradional folder makers, is here for the long haul. If you are a collector, you might want to think about this.
Cheers - Joe
-
Great writeup Spoon...I knew you'd take it apart!
I own (and EDCed for a long while) a C305. It's a partially serrated blade with Phillips and flat drivers and a caribiner. It's thinker than your average folder, but very comfortable. The drivers aren't an afterthought add on either, they snap into place and are solid. The blade itself came sharp, and with a little stropping on my leather belt, it can shave hair.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




