Electrician
-
Here we have an Electricians Mate.
I have a couple of other Electrician blade knives coming in this afternoon. I'll post pictures once I get them.

-
Back in the 1990's Radio Shack was selling these 84mm Victorinox Electrician's knives. I fitted mine with a scale from a knife once sold by Swiss Air.

Here are my Radio SAKs
I believe I had 2 or 3 of them, as I was always forgetting one at work. If I remember correctly they were $9.99 each. Does anyone know when Radio Shack stopped selling them? I looked into getting another one a few years ago and they didn't seem to carry them any more.
-
These two came in tis afternoon.

-
@ebarberena said:
These two came in tis afternoon.Very nice mate.

-
IMO this SAK represents the Electrician essence.

-
@ebarberena said:
IMO this SAK represents the Electrician essence.

-
I really need to get a pic done for this thread

-
-
Glad to see the Electrician getting some love. After high school when I went into the CG, I was an Electronics Tech so I carried an Electrician the entire time I was in till I retired. They worked well for what I needed to do. And the fact I could get them thru the stock system for free helped too. Lol.
-
This is what a proper electrician solo looks like
:D
-
-
-
Gonna stick my neck out here.
I like the Electrician - I have one - And the flat sheepsfoot blade is very handy.
But to me the stripping blade is all wrong.
It's awkward, if not unsafe, to use - A much better design would be to have a small, sharp notch - like on the Swisstools - for stripping. -
@Huntsman said:
Gonna stick my neck out here.I like the Electrician - I have one - And the flat sheepsfoot blade is very handy.
But to me the stripping blade is all wrong.
It's awkward, if not unsafe, to use - A much better design would be to have a small, sharp notch - like on the Swisstools - for stripping.I would tend to agree with you. I rarely if ever use it for wire stripping. I find it most useful as a small slicer for opening boxes, stuff like that. I'd like it to be without the cutout, and no chisel grind. That's why I've had Syph make a few up for me with the small pen blade instead.
In about every case where I've needed to strip wires, it's a planned task, so I've a couple dedicated wire strippers in the tool box. But in a pinch, the SAK will work if needs be.
-
Here's mine. I had a heck of a time getting the blade sharp and ended up adding a 10 degree edge on one side and 20 on the other. Looked like the previous owner had issues as well since the blade was scratched and quite dull when I got it.

-
Bantam Electrician?

-
Bantam Electrician?
Can't tell by the picture. Is that 85mm?
Yes => 84mm
It is a new Bantam that I just got, set on top of my 84mm "Radio Shack" Electrician with the blade open. I've been doing some comparisons, at least what I can, without taking them apart (yet). I may do a custom job on it sometime to create a Bantam or Cadet Electrician.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





