Leatherman wave modding options
-
For all the leatherman wave owners and people who customize their leatherman. Is it possible to put a dedicated Philips driver in a leatherman wave instead of the bit driver?
There is a pin where the plier rests on but I guess you can break it off or grind it away.
And could you replace the can opener with the small flathead screwdriver from the Rebar.
If so I will pick up a second hand rebar and put those tools in my wave, then I have my ultimate wave.
The can opener I never use and the bit driver does not have enough reach for me.Is there someone who has tried this? Or has pictures of it?
Or will test this for me? -
@anditsgone said:
For all the leatherman wave owners and people who customize their leatherman. Is it possible to put a dedicated Philips driver in a leatherman wave instead of the bit driver?
There is a pin where the plier rests on but I guess you can break it off or grind it away.
And could you replace the can opener with the small flathead screwdriver from the Rebar.
If so I will pick up a second hand rebar and put those tools in my wave, then I have my ultimate wave.
The can opener I never use and the bit driver does not have enough reach for me.Is there someone who has tried this? Or has pictures of it?
Or will test this for me?First of all, Welcome to the forum!.

Second of all, i was just looking at The Hacked Leatherman owner club and i found this picture

Breezy12 did this mod and to can see that the pin that holds the blade safety lock is still there, so i guess it's possible!.
-
yup, it's possible. :D
there's lots of good info in this recent thread. if you want to keep the blade safety locking pins, you'll need to do some grinding on both the Phillips and the small flat driver from the Rebar. if you want to use the zoidberg method, you can remove the entire pin mechanism, re-peen the lock tab spring, and there shouldn't be any grinding required.
the small flat driver from a Rebar is the same thickness as the can opener, so that should be a fairly straightforward swap. (you shouldn't need to mess with spacers or thinning any tools.) same goes for the Phillips and the bit driver -- they are also the same thickness.
oh, and like Dan said -- welcome to the forum!

-
The only problem I will encounter is that the fixed Philips screw driver is longer, so this doesn't fit in front of the pin where the plier rest on so I think that the pin has to go but the blade locking system can stay, it is the pin where the plier rests on when it is in the closed position.
I think I can break that of and that the fixed Philips will replace the pin and the plier will rest on the Philips shaft.
On the picture you can see the pin.
My only question is does the tool close completely if the plier rests on the Philips head?
I could not find a answer for that on the other thread.
-
Another picture's
That is the pin that has to go to make room for the Philips head.Does somebody have a Picture of how the Philips head will sit in the handle, from what I can see is that the Philips head is longer than the can opener.
I guess that it will barley fit but that the tool can close all the way but I would love to see how other people solved this problem.And could somebody send a picture of a rebar or blast with the can opener and Philips head next to each other so I can see how much longer the Philips head is.
Is there a site or thread where you can look up all the dimensions of the leatherman tools.
This would be extremely handy for people who mod their leatherman.

-
I really dont know if there's a site like this.
Why wont you just go into your local Leatherman dealer and see if there is a rebar and check whats the size?Sent from my iPhone using Tapatalk
-
@anditsgone said:
And could somebody send a picture of a rebar or blast with the can opener and Philips head next to each other so I can see how much longer the Philips head is.Rebar
-
@anditsgone said:
My only question is does the tool close completely if the plier rests on the Philips head?
I could not find a answer for that on the other thread.In the thread Breezy linked to, we mention a difference between tools.
Some will close completely and some will not.
Most do not and require some work.The build thread for the pic dan posted is An Old New Wave: a restoration project (pic heavy).
I've done mods before removing both plier rests so the pliers sit more into one handle to allow for the Phillips in the other.
These days I just remove the blade safety and the small nub by the locking tab.
This allows more tool combinations like full length scissors and the Rebar pliers etc.@anditsgone said:
Does somebody have a Picture of how the Philips head will sit in the handle, from what I can see is that the Philips head is longer than the can opener.
I guess that it will barley fit but that the tool can close all the way but I would love to see how other people solved this problem.Here is a pic showing two Charge mods.
In the middle is Phillips with Large Screwdriver and on the right is Phillips with Opener.
Click on it for a larger pic.<a href="https://flic.kr/p/qKh9vN" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8572/16242322192_7e974ab3f8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
My only question is does the tool close completely if the plier rests on the Philips head?
I could not find a answer for that on the other thread.In the thread Breezy linked to, we mention a difference between tools.
Some will close completely and some will not.
Most do not and require some work.The build thread for the pic dan posted is An Old New Wave: a restoration project (pic heavy).
I've done mods before removing both plier rests so the pliers sit more into one handle to allow for the Phillips in the other.
These days I just remove the blade safety and the small nub by the locking tab.
This allows more tool combinations like full length scissors and the Rebar pliers etc.@anditsgone said:
Does somebody have a Picture of how the Philips head will sit in the handle, from what I can see is that the Philips head is longer than the can opener.
I guess that it will barley fit but that the tool can close all the way but I would love to see how other people solved this problem.Here is a pic showing two Charge mods.
In the middle is Phillips with Large Screwdriver and on the right is Phillips with Opener.
Click on it for a larger pic.<a href="https://flic.kr/p/qKh9vN" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8572/16242322192_7e974ab3f8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

-
[url=https://flic.kr/p/qKh9vN]

Wow, that looks so good with those funky safety prongs removed...
Hey zoidberg, does removing the blade safety mechanisms from the Charge/Wave have any effect on the pliers?
(I was wondering, since they kind of curl up under the pivots.)- does it feel any different when the handles are opened?
-Tulku
-
@Tulku said:
Hey zoidberg, does removing the blade safety mechanisms from the Charge/Wave have any effect on the pliers?
(I was wondering, since they kind of curl up under the pivots.)- does it feel any different when the handles are opened?
-Tulku
No effect on the pliers or change in feel opening and closing the handles.
-
Thanks for the info and the pictures.
I think I will just stick to the stock bit driver because I am not fond of removing the safety catch because that probably will void the warranty and I have to replace another tool with small flathead and there isn't much space for that.
If I ever get in a situation where I am hindered because the reach is not enough I might replace it. -
While some experts are on this thread I'd like to ask a question. I know what the blade safety mech does but I don't appreciate why. What risk exists with (say) Wingman/Sidekick with external OHO blades but no safety mech?
-
@pingu said:
While some experts are on this thread I'd like to ask a question. I know what the blade safety mech does but I don't appreciate why. What risk exists with (say) Wingman/Sidekick with external OHO blades but no safety mech?When I slam the plier of my wave from open to closed the file comes out one centimeter.
But no one does that except when you're bored and fiddling with your tools.But when I am cutting hardwire and the tool cuts through with allot of force the plier slams closed and sometimes the file or saw comes out a bit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
