Re: First mod - mini Farmer with scissors
-
Outstanding work there Harryf3!!

Boy, there sure is a lot of great info in this thread :)
-
And another two shots together with the Artisan. See the difference in the liners.


Both are 4 layer 84mm SAKs and have very similar configuration. Actually I tried to copy the Artisan and make an alox one and at the same time make it similar to the regular 93mm Farmer.
The custom alox in way thinner and this is where alox scales shine, let alone the beauty. The beauty is of course something subjective.
Of course the Artisan has also the philips and awl on the back and also has a small blade.
The mini Farmer has the awl in the blade position and that’s a plus.
But overall the Artisan is a better knife. -
Nicely done... again :D
-
Agreed.... very nice :)
-
Very good information, I will start planning my first SAk modification..
Thanks.. -
Awesome!

Sent from Ash forum mobile
-
Haven't seen harryf3 in awhile. Nice mods. Wish he would come back.
-
@harryf3 said:
Hand rivet toolsRivet squeezer

This is the most advanced and precise tool.
It is used in aircraft industry.
The tool together with the dies may cost $150-200 or more.
If we are modding SAKs on a regular basis then this is maybe a good investment.If you are like me and just want to make your dream SAK, then make another 2 or 3 for your buddies and then quit, that tool is probably not an option.
U-clamp squeezer

This is usually a custom made press/squeezer made from a U-clamp.
The end of the screws must have a proper concave hole to form the head of the rivet.
This hole is easily made with a round drill.Rivet punches

Like the ones I’ve made with a lathe.
If we adapt them to some kind of custom made press or guide for hammering then this tool is excellent.
Just hitting with the hammer is dangerous and it will eventualy hurt the scales.All rivet tools require that the excess rod which will form the head of the rivet has the right size.
If it’s too short the die will not form a complete head and will eventually hit the scales of the knife.
If it’s too long we’ll have a metal “flow” outside of the die or the pin will bend.Ball peen hammer


The well known basic tool for making a round head rivet.
Widely discussed in the forum.Screw posts


I’ve searched the world to find the proper size for my mini-Farmer project but couldn’t find 2.2 mm screw posts.
The thinnest I found was 5mm brass screw posts and solid brass extensions
This was my second and possibly the last contribution to the mod squad as this is all the knowledge I have about modding a SAK so far.
I cannot see how we can make our custom alox SAK better.
The rest is experience and experimenting.Once again I hope you found it useful.
all the best
Aris, Greecedid anyone here every try making a homemade presser out of a clamp as pictured?
thank you, I bought one, now i need to find it lol maybe i'll start looking at it while my desk is full of sak parts
-
thanks for all the tips
-
@WiSAKfan said:
thank you, I bought one, now i need to find it lol maybe i'll start looking at it while my desk is full of sak partsThose type of rivet presses only work for thin rivets like aircraft skins. If you tried to rivet a SAK like that it would cause the center area of the pin to bulge and make all the tools very hard to rotate and/or bend the pin depending on length.
The way you would want to build a power riveter would be to start with something like an impact drill and make a custom head for that to shape the head. It would need to be in a fixed bracket and have a matching bottom cut. Short sudden impacts will deform the surface of the metal pin and not transfer the forces down the body of the rivet causing the issues I raised above.
-
I priced a automatic rivet machine. When they sent back the quote at 10k plus I kindly refused.
-
This is all very very interessting, sadly all i see is "please enable third party hosting" on all the photobucket pictures though, sadly. Is there a way to see these pictures without paying for their membership?
-
It’s not you, it’s photobucket. They started charging extortionate amounts for image hosting earlier this year and broke the internet.
-
To echo: thanks for a superb write-up.
I particularly like the outlines on paper of where everything goes; I wish I'd done that before taking apart four SAKs, especially for the liners!
Excellent work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
