Replacing Crunch knife with something else?
-
Just about, but the problem that keeps me from putting in 2 is the teeth have set, so the bottom is thicker and 2 would not slide over each other
-
you might be able to find a way if you didn't put them next door to each other, but then you might have issues with them hitting other tools.
I wouldn't use an angle grinder myself, Dremel-type tol or bench grinder would be preferable.
Good luck!
-
It appears a blade with a .05 thickness will fit<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0636_zpsn4x6q4yc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0636_zpsn4x6q4yc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't think I want a kerf that thick, it just requires more effort -
@Cupboard said:
you might be able to find a way if you didn't put them next door to each other, but then you might have issues with them hitting other tools.I wouldn't use an angle grinder myself, Dremel-type tol or bench grinder would be preferable.
Good luck!
Thanks! I hadn't thought of that actually, I'll see what will work.
I used an angle grinder with a cutoff wheel to get the very rough shape, then will use my 6x48 belt sander, then a dremel and files for the rest.
-
I ended up using a lenox blade with a .05" thickness <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0636_zpsn4x6q4yc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0636_zpsn4x6q4yc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And using a heat gun and multiple vise grips and vises on a vise grip multitool I got the knurled barrel screws off. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0644_zpspswffpzs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0644_zpspswffpzs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0645_zps1p0mzv9h.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0645_zps1p0mzv9h.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0647_zps4ipfgzn5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0647_zps4ipfgzn5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I was able to slide a screwdriver through and avoid messing up spacers. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0649_zpspb2bjvn1.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0649_zpspb2bjvn1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After positioning it on the blade so that the teeth aligned and the smooth part was on solid, I clamped and traced the shape with a sharp knife. Using a blade to mark a blade on a blade. Notice a pattern haha? I planned on using the 11 amp angle grinder to hack to size then belt sand the rest. My brother had the grinder so I used my dremel with a cutoff wheel and followed the line. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0652_zpsujx8zqlu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0652_zpsujx8zqlu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>another reason why the panavise rocks for small work <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0654_zpshtvjwqdz.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0654_zpshtvjwqdz.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Where I'm currently at after 15 min <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0655_zpskyyeo26w.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0655_zpskyyeo26w.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Looking good so far
-
Good work Shawn. IMO the blade could have been flipped to cut on the pull. Can't wait to see the finished product.
-
Thanks! I tried cutting a piece of angle steel on the pull and the push, and found that in order to get the teeth to grab on a low TPI saw a push worked better. On fine tooth a pull worked better. I'll see how it works out though
-
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Here is the finished prototype. I slightly messed up the lock detent but it functions fine. I ended up not liking the push cut, and it looks too aggressive. Next version will include a pull cut and finer teeth. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Where can I find the washers if I were to use a thinner blade? I don't have the skills to make them. I do have access to a laser cutter at school though...
-
@Shawn Cimonetti said:
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Here is the finished prototype. I slightly messed up the lock detent but it functions fine. I ended up not liking the push cut, and it looks too aggressive. Next version will include a pull cut and finer teeth. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Where can I find the washers if I were to use a thinner blade? I don't have the skills to make them. I do have access to a laser cutter at school though...
can u made me one? i will buy it put on rebar and ST300
-
Looks like it is coming along nicely. You could use some blade scraps to make washers. I have even plastic bottles to make spacers. I was looking at your unity knife are you flooring installer?
Sent from my iPhone using Tapatalk
-
Have you seen my post on modifying a Crunch for UK EDC?
I've not finished it yet but at the end I mention turning up a finger-nut which will allow me to remove the blade without tools. -
@Biker_Bob said:
Have you seen my post on modifying a Crunch for UK EDC?
I've not finished it yet but at the end I mention turning up a finger-nut which will allow me to remove the blade without tools.I have not seen that, I will definitely check it out!
-
@Mike 56 said:
Looks like it is coming along nicely. You could use some blade scraps to make washers. I have even plastic bottles to make spacers. I was looking at your unity knife are you flooring installer?Sent from my iPhone using Tapatalk
Plastic sounds easy and smooth, I might try that.
I love the Stanley fixed blades for shop work, but I am a high school student. I've done some carpet work and can appreciate the difference between those and the sliders.
-
I finished up the mod, but I plan on doing a final version that is perfect and cuts on the pull.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0665_zpsf08yxd8e_edit_1425594258917_zpsjs94trwu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0665_zpsf08yxd8e_edit_1425594258917_zpsjs94trwu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0666_zpsilhjgzgc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0666_zpsilhjgzgc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> I used brake cleaner and to my surprise it stripped all the paint off.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0668_zpsskkeu4rv.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0668_zpsskkeu4rv.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0669_zps9mczqfgc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0669_zps9mczqfgc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It works fine though<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0670_zpsa9mnaudk.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0670_zpsa9mnaudk.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After following my tracing lines perfectly, it wasn't anywhere near fitting proper. After about an hour of filing, testing and putting on the finishing touches it worked! -
Great job

-
[/quote]
can u made me one? i will buy it put on rebar and ST300
[/quote]Hmmm, I've thought about this and unfortunately I can't. I don't have either of those multitools and need to have them to make the custom fit. If I can find a way to layout the shape perfectly I would gladly make them. I'm thinking maybe a hi res photo, some caliper measurements, photoshop and a printer?
-
Nice work. I'd like to do the same to a number of tools.
-
It's a nice job, but aren't you worried that you've replaced a locking sharp edged implement with another locking sharp edged implement?
-
@Biker_Bob said:
It's a nice job, but aren't you worried that you've replaced a locking sharp edged implement with another locking sharp edged implement?Yes actually. I don't plan on carrying this in the place I was talking about before. I am still going to try to put in a bit driver or something.
As soon as I finished the first prototype I realized it still looks like a knife. I still made a second just because!<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0699_zpsgr9kebt0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0699_zpsgr9kebt0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0700_zpswycwfgqr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0700_zpswycwfgqr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't consider this to be acceptable, even though the edge is not sharp at all, it still looks like a blade to anybody else.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
