And so it begins.... (My adventures into Alox!)
-
Thanks Syph...the Wenger BO cigar golfers are now complete with their final scales.

-
still trying to catch up reading this whole spread! I was going to wait till I caught up to start chiming in on the chats but I can't wait any longer! lol I know you've heard it a million times, because I've read it a million times! your work is amazing and I love seeing what you come up with next! so ill get right to it, you've inspired me to start modding myself and I actually love working with the 58mms ( I know you have a forum for those also ), I just had a quick question in general. I received a pint of stainless BO and I want to darken my 1st set of components. Should I just clean them up real nice before dipping them in the solution with standard dish washing soap, etc. or should I prep them in ferric chloride or sulfuric acid to get the most out of BO on the components?
and my next question, I saw you posted a CAD drawing of your scissor spring around page 54 or so. would you have the specs on that? or am I crossing the line with that question? I'm considering going the route you did with ordering some 440 and finding a good waterjet guy.
Anyway, I hope to start adding my 2cents and ideas to this thread to keep these amazing looking mods come to life! Thanks again, keep up the amazing work Bob!
-Sean
-
@mudtracks said:
still trying to catch up reading this whole spread! I was going to wait till I caught up to start chiming in on the chats but I can't wait any longer! lol I know you've heard it a million times, because I've read it a million times! your work is amazing and I love seeing what you come up with next! so ill get right to it, you've inspired me to start modding myself and I actually love working with the 58mms ( I know you have a forum for those also ), I just had a quick question in general. I received a pint of stainless BO and I want to darken my 1st set of components. Should I just clean them up real nice before dipping them in the solution with standard dish washing soap, etc. or should I prep them in ferric chloride or sulfuric acid to get the most out of BO on the components?and my next question, I saw you posted a CAD drawing of your scissor spring around page 54 or so. would you have the specs on that? or am I crossing the line with that question? I'm considering going the route you did with ordering some 440 and finding a good waterjet guy.
Anyway, I hope to start adding my 2cents and ideas to this thread to keep these amazing looking mods come to life! Thanks again, keep up the amazing work Bob!
-Sean
Making the scissors backsprings is the closest thing to IP I think I have. Im on revision 3 now and its getting better on each try. If you want to have a try, keep in mind the springs will change shape during heat treat, and finishing them to look like a Vic spring is alot of work. :D
-
This took lots of effort today...
Deluxe tinker with....
- Blue Ti Scales
- Black Alox Liner
- Stainless steel tip on tweezers
- Still 2 less liners than stock :D
I got my cake and am enjoying eating it. Dropped the scale liners and tweezers work fine with the backspring as backing! :D








I cut a hunk off a backspring and rivetted it on the stock tweezer, then shaped it to fit the scale cutout!



Ti deluxe tinker with tweezers and NO PLASTIC PARTS!!!!!!
-
Oh my freaking... :ahhh :ahhh :ahhh

-
Holy TI Batman.

-
Yeah, I think my Rogueneer will be getting an upgrade next year ;)
Sent from my XT901 using Tapatalk
-
Sweet!!!
-
Curses foiled again by my stupid work computer. I need pictures!
-
That is so good.

-
That may be your most awesomest (?) creation to date.
-
@Syph007 said:
This took lots of effort today...Deluxe tinker with....
- Blue Ti Scales
- Black Alox Liner
- Stainless steel tip on tweezers
- Still 2 less liners than stock :D
I got my cake and am enjoying eating it. Dropped the scale liners and tweezers work fine with the backspring as backing! :D

Ti deluxe tinker with tweezers and NO PLASTIC PARTS!!!!!!
This, with a corkscrew and an inline phillips facing the can/bottle opener would probably be my dream SAK.

-
Making the scissors backsprings is the closest thing to IP I think I have. Im on revision 3 now and its getting better on each try. If you want to have a try, keep in mind the springs will change shape during heat treat, and finishing them to look like a Vic spring is alot of work. :D
Gotcha, thanks for the advice and ill see what I can come up with. now for the BO do you prep them in ferric or sulfuric before the initial drop in the bo solution or just a regular cleanse will do? hah I'm kinda nervous to try it but ill post up progress pics if interested
-
@mudtracks said:
Making the scissors backsprings is the closest thing to IP I think I have. Im on revision 3 now and its getting better on each try. If you want to have a try, keep in mind the springs will change shape during heat treat, and finishing them to look like a Vic spring is alot of work. :DGotcha, thanks for the advice and ill see what I can come up with. now for the BO do you prep them in ferric or sulfuric before the initial drop in the bo solution or just a regular cleanse will do? hah I'm kinda nervous to try it but ill post up progress pics if interested
I have an electroplater do the BO. Its a hot caustic industrial process. If you have the home kit for stainless I'm curious to see how that works out for you. The guy I use has tuned the process for me and it comes out very nice, so its easier for me to have them do it.
-
-
Here is a comparison pic with standard deluxe tinker. Dropping those outer liners and having the Ti scales does save a noticeable amount of thickness.


-
Curious how it compares to a 3-layer cellidor...my guess is they should be pretty close.
-
So there's no liner to sandwich the tweezers.
Is the tang of the small blade in all positions enough to do that job?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login