What Did You Use Your Multitool For Today?
-
Yesterday I used the Spirit's butterblade to cut a large floor mat in half. It sliced through it with ease, but left a sticky mess all over the blade.
Sent from my XT901 using Tapatalk
-
@captain spaulding said:
Yesterday I used the Spirit's butterblade to cut a large floor mat in half. It sliced through it with ease, but left a sticky mess all over the blade.
Sent from my XT901 using Tapatalk
Rubbing alcohol will take that stuff right off.
Sweet, thanks for the tip buddy :)
Sent from my XT901 using Tapatalk
-
@captain spaulding said:
Yesterday I used the Spirit's butterblade to cut a large floor mat in half. It sliced through it with ease, but left a sticky mess all over the blade.
Sent from my XT901 using Tapatalk
Rubbing alcohol will take that stuff right off.
Sweet, thanks for the tip buddy :)
Sent from my XT901 using Tapatalk
No worries. I was expecting you to say you already knew that.
-
@captain spaulding said:
@captain spaulding said:
Yesterday I used the Spirit's butterblade to cut a large floor mat in half. It sliced through it with ease, but left a sticky mess all over the blade.
Sent from my XT901 using Tapatalk
Rubbing alcohol will take that stuff right off.
Sweet, thanks for the tip buddy :)
Sent from my XT901 using Tapatalk
No worries. I was expecting you to say you already knew that.
Well considering how much time I spend here, I've probably read it somewhere and just didn't retain it ;) It doesn't help that I rarely get my MTs dirty like this.
-
Me and the Mrs decided to replace or sliding door screen today. I used the Spirit X and Vic Rescue Tool to get the job done. I started using the Spirit's Phillips driver to take the screen of the track and the small driver to pull out the rubber seal (image 1). The Mrs bought a tool to push the screen and seal into place (image 2). I used the large driver/bottle opener to push in the corners (image 3). I used the blade on the Spirit to trim the excess screen and the finale with the Phillips driver on the Rescue Tool to reinstall hardware (image 4).




-
@stealth007s said:
Me and the Mrs decided to replace or sliding door screen today. I used the Spirit X and Vic Rescue Tool to get the job done. I started using the Spirit's Phillips driver to take the screen of the track and the small driver to pull out the rubber seal (image 1). The Mrs bought a tool to push the screen and seal into place (image 2). I used the large driver/bottle opener to push in the corners (image 3). I used the blade on the Spirit to trim the excess screen and the finale with the Phillips driver on the Rescue Tool to reinstall hardware (image 4).Good work there Mr and Mrs 007.

-
A gas barbecue? In Texas? Is that even legal? [emoji12]
-
Vic Hunter is on chilli duty today
-
The handle on one of the pots felt loose while I was doing dishes last night after dinner. I used my TL-29 screwdriver blade to tighten the screw in the handle.
-
I like it. It seems like a more robust knife than the Crater and the Vic I have. I'm going to carry it instead of my Crater a couple days next week to see how it is.
-
I used two MTs to take apart another and put it back together. Used my OHT and my schrade tough tool to take my PST apart and put a skeletool pocket clip on it

-
I used my Spirit as a mirror, which is a rather useful function, especially when needing to make sure there's no bat in the cave while in the elevator at work.....
Sent from my XT901 using Tapatalk
-
I used my Spirit as a mirror, which is a rather useful function, especially when needing to <u>make sure there's no bat in the cave while in the elevator at work</u>.....
Sent from my XT901 using Tapatalk
Is that code for something???


Lol, yeah. Checking to make sure there was nothing in my nose ;)
Sent from my XT901 using Tapatalk
-
Used the hard wire cutters on my Spirit to cut a broken spoke out of a friend's bike wheel when while out on a ride. Went through the stainless wire really easily. :)
Unlike the pliers on my MP400 when I did the same thing a week ago and put a great big notch in the edge. :(
-
@hiraethus said:
Used the hard wire cutters on my Spirit to cut a broken spoke out of a friend's bike wheel when while out on a ride. Went through the stainless wire really easily. :)Unlike the pliers on my MP400 when I did the same thing a week ago and put a great big notch in the edge. :(
SPIRIT FTW!
-
Used the hard wire cutters on my Spirit to cut a broken spoke out of a friend's bike wheel when while out on a ride. Went through the stainless wire really easily. :)
Unlike the pliers on my MP400 when I did the same thing a week ago and put a great big notch in the edge. :(
SPIRIT FTW!
As per usual.

-
@Monrogue said:
**I used my Spirit as a mirror, which is a rather useful function, **especially when needing to make sure there's no bat in the cave while in the elevator at work.....Sent from my XT901 using Tapatalk
Agreed. I have done the same as well as using the blade on a SAK as a mirror. When I did that I was using it as a mirror and using the scissors on my classic to trim some wild facial hairs.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login