Firefly / Moonlight mode
-
I need a Thrunite T10S... :ahhh
-
@Etherealicer said:
I need a Thrunite T10S... :ahhhI want one too even tho I have a NW and CW T1O

-
I need a Thrunite T10S... :ahhh
I want one too even tho I have a NW and CW T1O

Did you know it can tail stand?

It comes with a diffuser cone, too! :ahhh
-
-
@PTRSAK said:
I actually used the firefly mode on my Thrunite Saber last weekend. ...
Day, er, night saved by firefly mode.The Thrunite Saber is a very interesting little light. Isn't it the one that can use either AA or CR123 cells?
Apparently it's floody. That's the only thing I miss on my EDC Fenix LD09, it's not very floody, but I can live with that.
How is the Saber on the 9 lumen setting, please? Is it enough for moving around in unknown terrain with confidence or you find yourself wishing it had an intermediate setting between Low and High? :)
-
I need a Thrunite T10S... :ahhh
I want one too even tho I have a NW and CW T1O

Did you know it can tail stand?

It comes with a diffuser cone, too! :ahhh
And an extra switch, just in case. ;)
You're not helping avoid temptation, not at all >:D :'(
-
I sold my i3s with its 0.5 lumen and regret it now :D
Probably most people said it already, but yeah, the real reason for me to like it to check stuff at night... to plug/unplug batteries when I occasionally wake up in the dark and see they've charged... I don't really neeed to preserve my night vision or anything. I don't read at night and even at night I'd rather have something brighter for reading. But if I say, want to check the buttons of the remote... (for some reason I can't get used to the damn thing), it's kinda... close- up work ... and if it's brighter, the light will feel awful on my eyes. I may wanna wake up at night or later, before I go to bed, take notes or something... given the white paper I write on, it also reflects quite a lot of light back on my eyes... so yeah, the only purpose (apart from the really long run time you mentioned) I have for this is just to spare my eyes the unpleasant feeling of being blinded by my own light :D
-
[quote author=Etherealicer link=topic=58007.msg1060963#msg1060963 date=1427452940]
I need a Thrunite T10S... :ahhhI want one too even tho I have a NW and CW T1O

Did you know it can tail stand?

It comes with a diffuser cone, too! :ahhh
And an extra switch, just in case. ;)
You're not helping avoid temptation, not at all >:D :'(
[/quote]Was that what I was supposed to be doing?

I got this Personal Shopping Assistant job figured out all wrong. :'(
Better?

Spoiler:
http://www.ebay.com/itm/391001304939 -
me first posting and reading everything else later
Guys, don't bash the poor Solitaire, since I lack a firefly mode, I used the incandescent Solitaire for the things I mentioned above quite a lot!:D I must say it does a good job (I think I'd even opened a new thread somewhere on CPF about this)
-
I was being a wiseguy in the OP... Firefly modes definitely have their place in this world. It's why I'm looking for one, there are moments where not much more light is needed, especially with how clear light LEDs put out.
As for the Solitaire, I've no idea how its LED version fares but the incan version was the first light I got as a kid and I was utterly disappointed, both by output and battery life. Maybe that's why I have this preference for extended runtimes

-
@enki_ck said:
Was that what I was supposed to be doing?
I got this Personal Shopping Assistant job figured out all wrong. :'(
Better?

Spoiler:
http://www.ebay.com/itm/391001304939I don't know anymore, mate, maybe it's me who has it all wrong :ahhh Thanks for the link, it doesn't help either! Is XP-L newer than XP-G2? :ahhh :D
You're flashlight-savvy, could you answer one question? I noticed in that link that the T1OS's beam intensity is only some 810 candelas? Is this because of the orange peel reflector? My LD09 claims more than 2000 candelas and I can't really understand such gap ??? Then again, I'm still trying to figure out how to use lumens and candelas to better understand what I'm reading. (I'm awful at math)

-
I never understood the whole candela thing too much.
Maybe some of our other flashoholics can help. -
The only thing I know is a candela measures how much light is concentrated on a given surface... and that's not quite exact.
Quote from Wikipedia:
*"In photometry, luminous intensity is a measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle, based on the luminosity function, a standardized model of the sensitivity of the human eye. The SI unit of luminous intensity is the candela (cd), an SI base unit."
*
Anyways, I'm getting the impression that the Thrunite T10S has your seal of approval? This is one promising flashlight, for sure! Are the Thrunites solid?
(in lack of such a smilie for torches/flashlights) -
Without boring people, Candela gives you the brightness in a small area, spot measurement (how bright is that point), whereas Lumen gives you the total light emitted.
It is easier to measure candela as you measure the light in a specific area, whereas for Lumens you need to collect, integrate, all the light produced and take a reading.
So, for example, using a zoom light, like a Sipik68, when the beam is tight, and you have a small spot the candela reading at the centre (the spot brightness) will be high. When you zoom out, and the light spreads the candela reading at the centre will be low.
Now, since the total amount of light produced does not change (you just concentrate/spread the beam), the Lumen reading will remain the same in both situations.
-
Thank you very much! You confirm what I suspected.I have some LED bulbs for home illumination that put out 550 lumens but there was no indication of intensity on the box. My guess was this is normal since there is no reflector on them to focus the light. They light up a room perfectly well but they don't have much throw.
I suppose this means that an output of many lumens and few candelas indicates a floody beam (or perhaps a flashlight of lesser quality). Of course, few and many are vague terms; for example, 30 lumens can be painfully bright in complete darkness.
Hmm, getting more and more tempted by that T10S. So, should the real question be, how many lumens per candela?

-
There are formulas for conversions, but since they are not directly related the whole process is complicated (Wikipedia has some information). I have seen some online calculators that make several assumptions and do the conversion.
Also with lumens, sometimes they give you the lumens that come out of the torch (the actual beam) and sometimes the ones that come out of the LED. As the light goes in various directions some will be absorbed and not come out of the torch.
The better makers will give you the out-of-the-front lumens, that are the actual ones you will use.
Some will also give the maximum theoretical lumens for a certain current to the led, that is usually higher than the actual current their torch utilises.You also have the "Chinese" lumens that is the really high, theoretical at max current lumens many cheap Chinese makers/sellers claim. So you see the same light claiming 1000 or 800 or 600 lumens.
The actual useful lumens are usually 1/3 of the claimed "Chinese" lumens. -
You just confirmed another suspicion of mine; that you don't know how something works for you until you've tried it! :ahhh
I'm trying to define my needs in numbers (candelas/lumens/minutes) but being no good at math the only way that's going to happen is by determining which torch(es) I like and why and then pray the manufacturer's claims for runtimes are half-honest. At least I can verify the actual runtimes! This means testing the same kind/brand of battery cells at least twice, repeat the process with another kind/brand of cell and so on...
What have I stepped into


-
I have some information on cheap torches in the review section, with some beam pictures that may give you some ideas
-
Believe me, I've seen them. I just didn't have something to post as I'm practically clueless. I only know what I like and what I don't and why.

(A simple ''thank you'' would be nice, silly me!)
-
@dks said:
Some will also give the maximum theoretical lumens for a certain current to the led, that is usually higher than the actual current their torch utilises.And that is only part of it. They also don't correct for the inefficiencies of they optics they are using, be it a reflector with lens, TIR, etc.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login