And so it begins.... (My adventures into Alox!)
-
@tattoosteve99 said:
Do you think the toothpick will work same as the tweezers did???? :wave: ??
-
Do you think the toothpick will work same as the tweezers did?
??? :wave: ??
I think not as the tweezers hold themselves in since they have resistance. The toothpick on cellidor scales have that little nub to click in. Could make the slot with bend it in maybe i dunno. I never used the toothpick so I dont see myself going to extraordinary effort to find a spot for it. :D Maybe I could do a Ti toothpick, that would keep to my rule of eliminating plastic...
@tommywp said:
I'm thinking a knife less 91mmm would be cool with saw, metal file and scissors. Is there any flexibility in the backtools for these 3 layers? I think I remeber reading that you're stuck with the hook, but could the fine screwdriver and awl fit? Is there a way to cover the corkscrew cut out using either the stock scales or the sweet new ones?Ive actually got a couple orders for Ti mods with no blade layer. IM just going to make full scales for the back to solve the cutout issue. The awl works in place of the hook ok, so that would be a good choice.

-
I'm thinking a knife less 91mmm would be cool with saw, metal file and scissors. Is there any flexibility in the backtools for these 3 layers? I think I remeber reading that you're stuck with the hook, but could the fine screwdriver and awl fit? Is there a way to cover the corkscrew cut out using either the stock scales or the sweet new ones?
Ive actually got a couple orders for Ti mods with no blade layer. IM just going to make full scales for the back to solve the cutout issue. The awl works in place of the hook ok, so that would be a good choice.

Sorry dude...when I was asking if the 91mm scales had a full back scale to cover the cut out I was asking about the alox hand grenade ones, not Ti....forgot that a guy like you has more then one set of 'sweet new scales'!!!!
Also, could the pruner blade or electricians blade go opposite the bottle opener on a 91mm?
-
I'm thinking a knife less 91mmm would be cool with saw, metal file and scissors. Is there any flexibility in the backtools for these 3 layers? I think I remeber reading that you're stuck with the hook, but could the fine screwdriver and awl fit? Is there a way to cover the corkscrew cut out using either the stock scales or the sweet new ones?
Ive actually got a couple orders for Ti mods with no blade layer. IM just going to make full scales for the back to solve the cutout issue. The awl works in place of the hook ok, so that would be a good choice.

Sorry dude...when I was asking if the 91mm scales had a full back scale to cover the cut out I was asking about the alox hand grenade ones, not Ti....forgot that a guy like you has more then one set of 'sweet new scales'!!!!
Also, could the pruner blade or electricians blade go opposite the bottle opener on a 91mm?
I never tried the eblade in the opener layer on a 91mm, but it could probably fit.
No I wont be making 91mm alox with no cutout on the backscale, that wouldn't be worth the cost to have produced as the demand would be very low. I would recommend to someone base the mod on a 93mm alox which already doesn't have backtools or the cutout, that would be the way to go.

-
Thanks man. I'll wait a few hours until I win the March Donation prize and we'll take it from there :D
-
Test fit up of a liner lock with a 111mm rescue blade. :D Lock works fantastic, no flex in the lock tab at all and it is rock solid.
The rescue blade needed ALOT of treaking to fit on a 93mm frame, but I saved all the teeth and modified a solo spring so that the end of the rescue blade rests on it.









-
Looks fantastic

-
Looks great so far!
One question. Why did you make the lock engage left instead of right?
-
@captain spaulding said:
Looks great so far!One question. Why did you make the lock engage left instead of right?
Yep it can go on either side, but in this case it is to minimize thickness.
-
The tab seems flush with the scale, leaving little room for the thumb?
-
Is my SAK done yet?
I sent you the parts like half a hour ago.

-
-
@HarleyXJGuy said:
Is my SAK done yet?I sent you the parts like half a hour ago.

Didnt you commandeer a military drone to fly them over?
-
The tab seems flush with the scale, leaving little room for the thumb?
The nubs are above the scale and that part work great. I didnt want a big tab sticking up. Once this is together i will do a video to show how it works.
It looks good
Personally, I'd make the nubs just a bit higher and maybe add a little texture.My hands get awfully sweaty at times, that's why I obsess so much ;)
-
Don't forget to put the old cross scales on it before you send it to me.

-
-
Don't forget to put the old cross scales on it before you send it to me.

Sorry this SAK build will be going home to the SAK motherland! :D
The liner lock is working well thankfully! I really didnt want to have to fund a ver 3 without having any success!
Congrats on the liner lock.

-
@Syph007 said:
Test fit up of a liner lock with a 111mm rescue blade. :D Lock works fantastic, no flex in the lock tab at all and it is rock solid.The rescue blade needed ALOT of treaking to fit on a 93mm frame, but I saved all the teeth and modified a solo spring so that the end of the rescue blade rests on it.









That's just too cool :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
? Maybe for a southpaw? But yeah looks great!