Machete Roundup
-
I just picked up the SOG sogfari kukri machete last night and I'm impressed.
I expected it to be thin light and flexible like the Cold Steel I've been packing for years. Mines a early model, year1 with the double snap sheath body and no grip snap. I remember when they were first released and got the first one available at my local outfitter.The SOG seems to be little thicker, a lot stiffer, a bit heavier and a lot better balanced.
It just feels better in the hand.I noticed something right away with the saw teeth that you should see on your tanto Chako...They set the teeth. I've never seen a machete company properly set the teeth, they always just gring them in and that's it. They don't set the flair to make the tips extend past the thickness of the blade.
They also have 2 "lashing holes' at the guard and one "lanyard hole" at the pommel. That's marketing speak for "we talked to our lawyers and figured out how to say "Smurf off Busse" just by renaming our holes"
Can't wait to use it for more than cutting a sandwich at 3am, which is why I was at walmart at 2:30am to buy it, or was it was cause I was hungry? I forget, somehow I ended up with a new knife to go with my insomnia on rye .

-
I had to take a look at mine, and you are correct, they did set the teeth on the Tanto. I don't have the Kukri version as of yet.
-
Well just got another new addition. I found this one at the local Pawn Shop for not that much money.
From what little I know about it, looks like it is an Ontario Cutlery machete made for SWI. Not sure if this is a model 1991 or something. The sheath is rubber with holes in it. On the back, there is a military style hook as opposed to a belt loop. Nice machete. Full tang with 3 rivets. Saw back, and very sharp.
-
You will also find them on the BHK, though it is more used for retention in the sheath.
Here is the one I use. Junked all my other machetes since receiving it. Just heads and shoulders above anything else I have handled. Fiddleback Forge 12":

Handle is just large enough to choke back to use it as a chopper or choke up and use it more like a camp knife. Sucker sings through thick and thin bamboo.
-
I'm just giving this a little
since I've been thinking about getting a machete, and this will make it easier to look at some. :D -
Smurf!
I dont need another machete.
I dont need another machete.
I dont need another machete.Sent from a device made from star dust using tapatalk
-
I'm just giving this a little
since I've been thinking about getting a machete, and this will make it easier to look at some. :DWhat kind are you after? IMO avoid anything in the middle and go for shorter thick choppers or longer thin cutters.
Oh ok,I'll go there...
That's what she said

-
I'm just giving this a little
since I've been thinking about getting a machete, and this will make it easier to look at some. :DWhat kind are you after? IMO avoid anything in the middle and go for shorter thick choppers or longer thin cutters.
I really don't know. This will be for the Jeep, just to help clear small brush, and annoying branches when I need to get out of the Jeep on a trail. Some trails get quite over grown, and it's a major pain trying to walk beside the rigs.
I have gift cards for Canadian Tire, so I'll probably get something there. I don't know if this link will work or not, but if it does, this is what they offer. http://www.canadiantire.ca/en/search-results.html?searchByTerm=true&q=machete
What kind are you after? IMO avoid anything in the middle and go for shorter thick choppers or longer thin cutters.
Oh ok,I'll go there...
That's what she said



-
I'm just giving this a little
since I've been thinking about getting a machete, and this will make it easier to look at some. :DWhat kind are you after? IMO avoid anything in the middle and go for shorter thick choppers or longer thin cutters.
I really don't know. This will be for the Jeep, just to help clear small brush, and annoying branches when I need to get out of the Jeep on a trail. Some trails get quite over grown, and it's a major pain trying to walk beside the rigs.
I have gift cards for Canadian Tire, so I'll probably get something there. I don't know if this link will work or not, but if it does, this is what they offer. http://www.canadiantire.ca/en/search-results.html?searchByTerm=true&q=machete
What kind are you after? IMO avoid anything in the middle and go for shorter thick choppers or longer thin cutters.
Oh ok,I'll go there...
That's what she said



Link worked. I would get the Outbound Machete and pair it with the Fiskars or Yardworks Hatchet.
Together they cost less than most of the other machetes and they give you much more capability and with two people working the job gets done quicker. -
This reminded me that I have an old US Army Machete out in the garage somewhere. Used to use it for clearing brush at my old house.
-
That Outbound looks good. Stay clear of the Gator by Gerber. However, the Pro version is very nice. The Camillus had issues with the handle breaking. They may have fixed that a while back...but I wouldn't chance it. The Bear Grylls is nice and heavy. The Les Stoud is too expensive for what it is.
-
Dug out my old army machete this morning. It had been stored poorly and had developed some rust. I cleaned it up with a scrubby pad and some vinegar and gave it a sharpening with a file. It cleaned up pretty good and took on a wicked sharp edge.
It's marked Ontario knife company US which is cool because I just recently got an Ontario Rat model 2 knife


-
Closest thing I have to a machete is a Condor pack Golok. However it isn't actually designed for what a true golok or machete is intended for (IMO anyway). Made far more robust for use on hard wood, rather than soft vegetation, makes it too heavy for all day use.
-
"Machete not impressed" :o

-
I found these interesting machetes locally and thought I should add to this little collection.
Fiskars has now entered the machete market on their own as opposed to what Gerber markets. Fiskars is the parent company of Gerber.
Meet the Billhook Saw 18.
The sheath is well made, with a Velcro flap, and a snap retainer.
And the Machete 24.
The sheath is much like the above minus the Velcro flap as this model is more streamlined and will just slide into the berth easily.
Next up are a pair of World Famous branded machetes.
This is the Kukuri machete that is 20" long.
The sheath features a zipper that runs along the top.
And the Bush Machete that is 24" in length.
With the sheath.
I must say, the World Famous models have beat the Fiskars when it comes to handle ergonomics. I also like that they come with lanyards for added safety.
-
@comis said:
Chako, thanks for posting. I like the Kukri, it looks quite functional.
I was just sharpening my machete by Ontario today, and had been thinking about the same question recently--why no maker put the lanyard hole somewhere on top of/close to the guard? The pommel lanyard hole is nice, but it really doesn't do much to retain the tool in hand, and if the tool does fly or swing out of hand, the lanyard at pommel is almost like a sure ticket for the tool swing back to cut me...

Here's one I just came across with lanyard holes at either end of the handle, the Kershaw Camp 10 Machete.
http://www.blades.co.uk/store/Kershaw-Machete-Camp-10-KR-1077.htmlI've actually been very tempted to go for this, does anyone have any experience of them?

-
While I'm on the subject of shorter machetes here's my other possible choices for wood butchering tools.
404 Not Found
Discover the most popular Air Rifles, Air Pistols and Guns at Ronnie Sunshines UK Shooting Gun Shop. Hit the target & book the gun range online or buy from our large shooting range online.
Ronnie Sunshines (www.ronniesunshines.com)
http://www.sheffieldknives.co.uk/acatalog/2-88.html


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login











