Dependable source for diamond products
-
Since i'm a fan of using diamond products for sharpening & polishing knife edges i'm always looking for good sources.
A few months ago i found this small US company: http://techdiamondtools.com, and they also have a Facebook page: https://www.facebook.com/lapidarypasteOwner: Yuriy Ma
Address: 10511 Glencoe Drive
Cupertino, California
95014 USAI exchanged a few e-mails with Yuriy and bought 100 carat (about 20 grams) of 230 grit diamond powder from him, paid with Paypal and received my order in about a week from the US, neatly packaged in a double plastic pouch inside a small bubble envelope.
I'm currently using the powder glued to the surface of a Rubber Wheel for sharpening ceramic knives and various high carbide steels, and i must say with very good results so far.
When my stock of various diamond compounds runs out i'm also going to order some from here.Now i'm not sure if i put this in the right place on the forum, i just wanted to share this useful information with my fellow knife afi's here.
If it's not allowed please move it elsewhere or remove. -
Here's an example of how i use the diamond powder from Yuriy.
The knife is made by Ewout vd Gronden (E.A.G. Knives), a Dutch part-time knife maker who spends a lot of thought, time and effort into making about two knives a month.
For steels he likes to use D2 and N690Co which he hardens himself with very good results (i've tested a few of them in the field and provided him with feedback)
After he finishes a knife he sends it to me to give it the final edge.
He also lets me know his wishes regarding edge angle & edge finish, and i go to work.This is one of his larger field grade knives i did recently, and the picture was taken by the maker before i put on the edge.
Steel is N690Co, blade is 18 cm long, and the handle is canvas Micarta.<a href="http://s1333.photobucket.com/user/Technite2/media/20150317_135625_zpswvcmponq.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1333.photobucket.com/albums/w632/Technite2/20150317_135625_zpswvcmponq.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
These are pics taken by me with it's new edge, in this case of a pre-specified and almost exact 35 degrees inclusive.
Bevels were ground with the Rubber Wheel coated with 230 grit diamond powder, after which i only removed the tiny burr with a Paper Wheel coated with 1 micron diamond compound.
This provides for a strong edge that is literally treetopping sharp along it's entire length, yet still has a lot of bite.
(pics can be clicked 2 x to get a better view of the scratch pattern the 230 grit diamond powder creates)<a href="http://postimg.org/image/jn63qf96t/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/jn63qf96t/GEDC8126.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://postimg.org/image/nm3b98xtx/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/nm3b98xtx/GEDC8128.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://postimg.org/image/djoj6iix1/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/djoj6iix1/GEDC8127.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://postimg.org/image/8wih4qvk5/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/8wih4qvk5/GEDC8129.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://postimg.org/image/4pxmpevyd/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/4pxmpevyd/GEDC8130.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://postimg.org/image/k17fq0tad/" target="_blank" rel="noopener noreferrer"><img src="http://s18.postimg.org/k17fq0tad/GEDC8131.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
That gets them pretty sharp and shiny.
Nate
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login