My take on EDC (by lister)
-
Yeah, there is severe lack of good sewing kits on the market. And I had an idea or two how to remedy that... Can you imagine keychain awl/multitool? :D Just wait until I finali have enough time and energy at the same time to learn how to use free cad...
I am getting to the promised diagrams and further exploration of edc theory soon. The dam job keeps cutting into my free time. :ahhh
-
This is the latest addition to my edc. It is the klarus mi x5, an aaaa battery flashlight. Due to the size of the batteries it is really small and despite of them it is really bright. The body is gold plated steel.
The size of the batteries also brings some down sides. The main one is they are quite hard to get in my country but Ebay solves this issue for me. Also smaller batteries bring reduced run time, but with 40 minutes on the brightest setting I can live with it.
I made the dangler myself. As you can see I used a zipper pull and added a home made clip. The clip is made form the blade of a hacksaw which I ground in to the shape and bent it over a fire and than quenched it in a water. For added grip to the edge of the pocket I puled over a piece of heat shrink tubing and shrank it with a lighter. At the en I sewn it on to the zipper pull through the hole that once served to fix the blade into the hacksaw. Now it reside in the left front pocket.

Ps: It is funny how you need a stronger flashlight at day than at night. :D
Pps: At night every one in a group really should have lights that are of the same strength, If not eyes adapt to the brightness of the strongest one which makes all the rest too dim to see by. ::) -
I always appreciate the dedication and the ingenuity I see among the "pants based EDC" crowd. But I must be honest when I say that I do not envy you. I simply do not like a bunch of stuff in my pockets. Drives me crazy.
As another poster mentioned above, I too wear gym shorts in the summer, along with other pants or garments that cover the lower half of my body, and I just don't want to be limited to heavy cargo pants/shorts as my only option.
My pocket limit is a small single AA light, a folder, a Bic lighter, a Quikoin, a comb, an EAB used as a money clip, and lately a small flint "worry stone" just because it is nice to fiddle with and beautiful (and I am obsessed with fire making).
The Bic and the light go in the fifth pocket. Flint and Quikoin in the front right bottom, folder clipped. EAB and comb in left front pocket. Back pockets empty.
Where is the rest? In a bag.
I imagine the bag predates the pocket historically, though I may be wrong. To me the bag is the most obvious answer. I don't really understand the objection to it at all.
I can wear whatever I want and have the bag with me. I do not wear suits, but I could surely find a bag that would work with a suit if I did. If I gather more stuff while out or need to take along additional items that day.. hey! I already have a bag for that!
I also carry water every day. I drink 64 ounces at least on an average day, and more on gym days. I like to just have that in a bag obviously. Perhaps you don't need that option, I do.
I don't have heavy pockets. I don't have to worry about what I will do if I am going to be wearing athletic clothes or a swimsuit or a lavalava. I just grab the bag.
People always say, "But you can lose the bag!"
Guys lose their wallets, keys, cellphones, etc. all the time and nobody tells them to stop putting these things into pockets.
I am so used to the bag that it is an extension of myself. I keep it with me, I keep it in sight, I am usually wearing it or it is riding next to me in a vehicle. I do not lose the shoes I am wearing.. I am not known for losing my jacket.. So why would my bag be at any greater risk?
You know whom I really envy? The bum bag guys. Fanny pack, or whathaveyou. That is an ideal compromise in so many ways. Holds quite a bit, easy on and off, no need for full pockets, and so on.
Problem is (and no offense to you if you sport one) that a bum bag just looks awful on everyone. I simply could not wear one and go out in public without feelng self conscious. And I'm really not a self conscious kind of guy (see lavalava above).
And this is where I come full circle and beg the bum baggers to forgive me.. Because I wonder.. To you pocket carry types.. are all bags just bum bags to you? Is that the real objection? You just can't be seen with a bag?
If that is honestly it, then I suppose I understand. Because fanny packs. -shudder-
-
@NKlamerus said:
You wanna talk about struggle for loation? I wear Gym shorts for pretty much all year. And even a skeletool "rolls" in the pockets edge!Still wanting some Pseudo scientific diagrams! [emoji14]
I cannot even begin to feel your pain. This board short mentality is so foreign to me. If I remember correctly DC makes a cargo short/board short combo. 6 pockets I believe and made of a quick dry material. You could just carry your EDC and then leave it in the car when going for a swim?
-
I guess we could start a whole thread on man bags vs pocket carry vs bum bag vs other carry options.
I personally don't like man bags and also feel the bum bag is really the best of all worlds yet I cannot bring myself to wear one ( yet ). I don't wear tactical pants nor cargo pants nor suits so for me jeans and typically a shirt with pockets is what I have for EDC items.
Wallet FLP, Handkerchief/SAK FRP, Lip balm Coin pocket, Bandana/folder BLP, Sheath on belt is how I run. Typically I dont carry anything in my RRP and while it may seem like all my pocket are occupied its all light and easy to carry YMMV. Cell goes into shirt pocket and key on belt loop. The only time I run with a bag is when I'm out on hikes or need additional gear which I almost never in the city.
I do love seeing who everyone carries their stuff and especially what everyone carries.
-
Im the same thith manbags ,now bumbags
i wear one at work,its a joggers small one and very flush fitting,i keep a small torch,farmer ,pen,and a key for the lift door,works well as frees my cargo pockets for tones of latex gloves 
-
@Zed said:
Im the same thith manbags ,now bumbags
i wear one at work,its a joggers small one and very flush fitting,i keep a small torch,farmer ,pen,and a key for the lift door,works well as frees my cargo pockets for tones of latex gloves 
Oh if we're talking work gear then space it not an issue for me its weight at that point. I carry a loaded tool belt with attached pouches with suspenders to help with the load.
-
i was the same on my maintenance job,although ive been thinking about using a bumbag in normal life
problem is ill over weigh it :D -
I started with a backpack.. A small day pack type. That was more or less what I lived out of.
When cycling became my principal means of transport, a messenger bag took that spot.
When a truck became my new means of transport, I was kind of in limbo for a bit until I saw the Maxpedition Fatboy bag a friend was using. The organization was just brilliant, and I didn't really like my messenger bag off bike that much.
This worked well for me save for water carry. Truth be told though I never was 100% in love with the "man bag" looks of it though. Shoulder bag.. Long strap.. Always flinging it around to retrieve things. Eh. Great bag mind you, just not me.
Ultimately the lack of water carry killed it for me.
I am back to a day pack now. Right where I started. A Sitka from Maxpedition, so technically a sling bag, but for all intents and purposes a one strap day pack.
Maybe I am biased, but I never think "man bag" when I see a guy with a day pack of any sort. I do groan a little if I see one festooned with blood type and a flag and some militant slogan "humor" catchphrase on a man over 30 at the grocery store. I am of the mind that even a bag with MOLLE should be considered in terms of color and accessory taste when worn by a grown man outside a war zone or off an air soft park. But I digress.
Pocket carry, my friends! If you can manage. Bum bag away if you haven't a care for stares! Rock that day pack if you don't mind the sore shoulder!
If it makes you happy, who am I to judge.
But I will poke fun if you look like Airsoft Rambo in flip flops at the check out. And I might snicker if you actually have one of those true designer Hollywood man purses.
-
Still Waiting for some Philosophizing (spelling way off?)

-
Great thread. I too exclusively pocket carry and obsess on figuring out the best set up.
The key to my whole system is that I don't carry a dedicated folder and my primary tool is carried in the far side of my back left pocket with a bandana filling the rest of the space to keep the tool vertical. The tool doesn't get sat on in that portion of the pocket and sitting on the bandana isn't uncomfortable.
The tool can't be too thick. I favor a 2-3 layer Alox SAK with the lanyard sitting inside the folded bandana to help keep it in place (see picture) or a Skeletool with the pocket clip removed and the bandana flipped 90 degrees so that its taller and skinner. Believe it or not, the Skeletool is a more comfortable carry in jeans then the 3 layer Alox SAK. If you wear very loose pants this might not work too well, but for me the SAK or Skeletool stays in place incredibly well. I also only use my tool a few times a day and the carry method might not be great for a more frequent user.
Wallet goes in the back right pocket and phone in the front left. That leaves the front right pocket for keys on a suspension clip and the rest of my EDC.
When wearing slacks I go with a SAK Pioneer in the back left, a AAA flashlight on the keys clipped to the front right pocket (picture), with maybe a 58mm SAK Manager on the keys too (but I've been finding even that too be a little much lately).
When wearing jeans I go with the Skeletool in the back left, Style CS/Brewzer/AAA flashlight in the coin pocket, and keys clipped to the front right pocket. Sometimes I'll also get rid of the small AAA and clip a Preon 2 penlight to the right pocket and let the keys fall to the bottom of the pocket. I also dream about replacing the Style CS and Brewzer with a custom SAK that was just scissors, saw, bottle opener, and can opener ground in to a technicians screwdriver ...but it would need to be an 84mm SAK so that it didn't stick out the top of the coin pocket.
Still trying to figure out my shorts carry...but currently thinking a Farmer SAK in the back left, and keys and a Squirt PS4 clipped to the front right pocket. But I'm not liking the loss of the flashlight. Thinking that keys, the Squirt, and a Veleno Quantaum D2 on the keychain might be doable but not sure how much less bulky that's really going to make the front pocket (as opposed to the AAA). Also thinking about replacing the Squirt and Farmer with a custom 3 layer Alox SAK but that would end up costing me the saw and pliers which I'm also not liking.
When I'm doing yard work or heavier chores I generally wear Dickies carpenter pants. My MUT gets clipped to my front right pocket, a AA flashlight gets clipped to the carpenter pocket and a Pirranha falls to the bottom of the carpenter pocket. I added Swisscard scissors and tweezers to the MUT (someone elses idea) and ground the punch in to a small screwdriver (someone else's idea too) and really think it's a great around the house tool. Now if I could just replace the MUT carbon scrapper with a stronger awl



-
@lister said:
I decided that I would like to start my own EDC thread, and this is it.
So now what? Well I'll start with a group picture of my edc items (my htc desire z is missing from the picture since the picture is not its selfie :D):

Ok, so there aren't so many cool gadgets in my EDC as in some I could mention, but there are some unique ones. :D
In following posts I'll be adding pictures of individual parts of my edc with brief explanation what they are, what I use them for and so on. But the pace will be slow as I am quite pressed for time lately. I mentioned some of these items before and I'll add links to the previous descriptions.
A word of caution dough, I am bound to do some light philosophising on the subject of EDC so bear with me, or just ignore that parts if you cant. :D
+1

-
It's been pointed out in I failed to do all the philosophising I threatened you with at the start of this thread. So after a long pause off we go to some light ramblings about the effects of mass on movement :D ::).
Mass of all the stuff we carry can be annoying. When we are expose to gravity, as most of us are every day (any astronauts around here? :D), the mass gains weight that can get in the way really quickly. At this point note that I talk about mass and not just the weight. Of course too much weight tiers us out and makes it hard to move. In additon there are problems even without all the mucking around with gravity we usualy. The more mass an object has the harder it is to change its velocity. That means the more you carry the harder it is to accelerate and decelerate and to make turns as all of your mass wants to continue to move in the same direction and at the same speed. So the less mass you have to edc the better.
In addition to the liner movements we do a lot of rotational movement. When we walk we swing our legs and arms as a sort of a double pendulum in a rotary movement and if we place some of our edc on our extremities the edc is of course moved in the same fashion. The equivalent of the mas moving linearly for the rotary movement is the moment of inertia. It is the product of mass and the second power of the distance of the center of that mass to the axis of rotation. So it is important for the ease of movement to place the mass as close to the axis of rotation as possible. In other words anything that is on your legs must be as close to the hip as possible and anything on your arm as close to the shoulder as possible. If that is not possible the item must be as light as they can be (light shoes and wrist watches anyone? :D). It is also important to be aware of the fact that if you carry something twice further from the joint the resistance to movement increases fourfold! Also the torque increases the further you get from the joint but not with the power of two.
Also, here is the Vitruvian man with some graphs for the moment of inertia and the torque :
:

I hope to get the next instalment up much sooner... -
-
A sewing awl?

-
Tattoo needle?
-
Yes it is an sewing awl but also a possible upgrade to my sewing kit.
It should be about 5 cm long and accept sewing needles form a sewing machine. The upper part of the body is still a thimble, the same as with my current setup. On the inside of the body There should be some kind of spool with severe separations for different threads and a hole in the middle for storing needles and the res of the stuff. I didn't design the spool yet that's why it is not on the picture.
The thimble is supposed to be screwed on to the body but I didn't manage yet to draw the threads in the FreeCAD.I will be needing some advice form someone who knows a bit about lathes, as I imagine this could be made on a lathe? Maybe from someone that made custom flashlights (am I wrong or do we have a member or two with such experience? :D)?
-
Make plenty of them, I want one and I'm sure others will too. ;)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



