The Dremel (or clone ) Owners Club
-
Nice score!

JR -
Sweet score for $7!!!

-
Thanks
, everything looked good on it so for the price I couldn't pass on it. I like the variable speed on this model. -
Ow... I didn't realize I'm part of this club too. Just got some nice new accessories for it from China:

-
I have 2. A 7700 cordless from wally world and a plug in version as well.
The cordless 7700 is totally shot. Actually an insult to dremel, the battery never hooked in correctly, lacked any amount of respectable torque, and never lasted for more than 5 minutes on high.
The corded version is the go-to.
Anyone find a specific good deal on accessories?
Especially the new quick disconnect cutting blades :D
-
I didn't realize there was a post like this here until now!
I'm in with a clone that's better than the original (or at least costs more than the original ;) ) the proxxon ibs/eI've also a bunch of extra stuff for it, a stand
a table for the stand:
a shaft:
and a vise
and of course some bits.
I have used it for some small stuff, but I still have to justify the cost of it with some nice work...
The tool and the accessories are mostly made of metal (the tool has some plastic part, probably to reduce weight, but the accessories are all-metal). It's very nice!!
-
Hi
Thread revived I guess :D
I've been using a borrowed Dremel for the past 2 weeks, it's a mint condition oldie, can't find a date but I doubt it's from this century.......very good.
I got my own Ryobi on Thursday, jury is still out but definitely some of the bits that shipped with it are not up to standard.
I also missed the speed control setting at first, that makes a huge difference.
-
yes, the general consensus about clones is that you may want to buy them to save some money, but you should go for the real deal when it comes to bits. They last longer (provided you learn how to use them... I know what I'm talking about ;)) and in the end save you money.
Danilo
-
@danilo said:
I didn't realize there was a post like this here until now!
I'm in with a clone that's better than the original (or at least costs more than the original ;) ) the proxxon ibs/eI've always wanted that one to replace my clones. But as you said they are expensive! A dremel 4000 kit came up for half the price of the proxxon, so I ended up going with it instead, although I can't say it's actually any better made than the cheaper clones. ::)
-
@jzmtl said:
I've always wanted that one to replace my clones. But as you said they are expensive! A dremel 4000 kit came up for half the price of the proxxon, so I ended up going with it instead, although I can't say it's actually any better made than the cheaper clones. ::)well in Italy the difference in price between the dremel and the proxxon is not that much, with dremel you get some extra accessory for a similar price so it wasn't
that much more expensive. also there's a cheaper proxxon model as well.the dremel has several accessories (so many!) that proxxon doesn't have and on which they won't fit, but I thought I'd prefer quality material over them ;)
-
I've always wanted that one to replace my clones. But as you said they are expensive! A dremel 4000 kit came up for half the price of the proxxon, so I ended up going with it instead, although I can't say it's actually any better made than the cheaper clones. ::)
well in Italy the difference in price between the dremel and the proxxon is not that much, with dremel you get some extra accessory for a similar price so it wasn't
that much more expensive. also there's a cheaper proxxon model as well.the dremel has several accessories (so many!) that proxxon doesn't have and on which they won't fit, but I thought I'd prefer quality material over them ;)
If they were similar in price I would go with proxxon assuming it actually has less shaft runout, the dremel attachments are mostly gimmick, I don't think I've ever used them and probably won't in the future.
-
@Aloha007 said:
Added another Dremel to my tools today. I got this one for $7 as it was missing all the accessories and the front cap. It works fine and my other dremel has complementary parts so I should be good to go. I'll check the brushes at another time but when tested it ran fine thru all speeds.I believe this is the model I have, and it's an awesome tool. I couldn't do without it. Nice score!
-
I currently own a 'clone' and it gets a lot of use. Planning to upgrade to the real thing this year sometime.
-
@mr626 said:
I currently own a 'clone' and it gets a lot of use. Planning to upgrade to the real thing this year sometime.Honestly unless your clone is a really cheap one, I wouldn't. My $40 clone works about as well as my dremel 4000 "upgrade". The latter has constant speed controller, which is nice, but that's about it. The most important part, shaft runout is about the same on both.
-
I currently own a 'clone' and it gets a lot of use. Planning to upgrade to the real thing this year sometime.
Honestly unless your clone is a really cheap one, I wouldn't. My $40 clone works about as well as my dremel 4000 "upgrade". The latter has constant speed controller, which is nice, but that's about it. The most important part, shaft runout is about the same on both.
Thanks for the advice, but mine is a 'really cheap' one. It really will be an upgrade.
-
I might as well jump in head first for my first post.
Been part of this club for a while know. My first rotary tool was a Black and Decker Wizard VP940 (Cordless, used the versapak batteries), which I used for 2 or 3 years before it croaked.
My second rotary tool was/is a cheapo Harbor Freight single speed that I bought about 10 or so years ago, it still works and I still use it on occasion (most recently the other day to do some engraving in some stones since I have more diamond tipped engraving bits that are 3/32" shafts and my newer rotary tool doesn't have a collet that will hold them yet).
The newer one I just got back in October, also from Harbor Freight. This one is a variable speed rotary tool and can accept attachments such as a flex shaft, the Dremel Plunge Router attachment, the Dremel Blade sharpener attachments,, etc... I have the flex shaft, and the mini saw attachment along with router bits on the top of my to buy list so I can build the table saw/router/shaper over on instructables. I have the improvised safety guard from instuctables along with a bunch of the bottle cap cutting blades (to cut plastic rods and plastic model sprues for use in miniature wargaming kitbashes). I have also made a number of abrasive buffing wheels from some green scouring pads.
I plan on getting the Harbor Freight Cordless Variable Speed Rotary Tool in addition to the two tools I already have. Thisb one will be mainly used when I am not at home or near a power outlet.
Will try to get pics posted as soon as I can.
-
I nearly destroyed my Dremel a while back trying to get a tool out of the chuck. I wrenched on it for 15 minutes and even got the pliers out to hold the bottom down. Turns out I was tightening not loosening.
I have no idea why I did this as I have never been so idiotic about something like that. It still works, but is acting strange. I don't trust it to hold a bit properly. I'm such a idiot. 
-
@captain spaulding said:
I nearly destroyed my Dremel a while back trying to get a tool out of the chuck. I wrenched on it for 15 minutes and even got the pliers out to hold the bottom down. Turns out I was tightening not loosening.Ouch, was it the keyless chuck or the stock collet and collet nut? Only experience I have right now is with the collet and collet nut, though I do have the keyless chuck (along with the flex shaft, mini saw, extra bits for engraving, carving and grinding etc...) on my rotary tool items get with tax returns list, the cordless rotary tool might be thrown on that list (bonus is the one from Harbor Freight I am looking at comes with a flex shaft, so if I order one I will have two, one for each tool).
Just need to find someone I know who has the tools for wood working since I have the Shopnotes Plans for the Rotary Tool Cabinet (Issue 124) and the Rotary Tool Storage Case (issue 67). I just don't know yet what one I would want to build, probably the cabinet, though I would be probably putting a handle on it like the storage case so I could take it on the go. If I leave out the dust box on the bottom, the space where it slides in looks like it is a bit larger then the Table Saw/Router/Shaper table (will hence forth call it the 3-in-1 table for ease of typing) that I grabbed the plans for off of Instructable (which if reading the plans correctly you can using only a rotary tool, a screwdriver and a hobby/x-acto knife, if you have the place where you purchase the wood cut it to size), if this is the case and I do built the cabinet, the dustbox space will be for the 3-in-1 table (the side extension will probably be stored elsewhere if I do use the dust box slot as for 3-in-1 table.
-
as promised the pics of my rotary tools, had to retake them as the originals where 5+MB each.
The first pic is of the old single speed rotary tool from Harbor Freight, this was about about 12 years ago (2003 or so), and still runs, though after dropping it on a hard floor it is a little louder now. Currently this is the tool I use for engraving since all my engraving bits are 3/32" shafts, and the collets for this won't fit into the newer rotary tool as they have a larger outer diameter then the newer tools collets.
The second pic is of the newer rotary tool, also from Harbor Freight, this one as previously mentioned was purchased Oct. 2015. This is one while it does have two engraving bits that came with it, is used for cutting sanding, buffing and polishing. Have used this to cut a padlock that had the key break off in it off of a trailer, cutting parts of of pewter gaming miniatures for kitbashing into new poses, sharpening my hunting/survival knife's blade, sharpening a hand ax and a machete, polishing some old silver, and trimming the nails of my parents dogs. Whats nice about this tool is it can accept the Dremel attachments like the router base, flex shaft, blade sharpening guides, etc...
The third pic is of some homemade items for the new rotary tool, the instructions were found over on Instructables. They are bottle cap cutting wheels (using these for cutting balsa wood, plastic rods and plastic model sprues for use in wargame scenery building/kitbashing) and a cutting shield for use with the actual store bought cut-off wheels. I also have a bunch of abrasive buffing wheels made out of the green Scotch Bright scouring pads.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login