Modify can opener/screw driver tip?
-
I've never done it, but it does sound like a logical and effective idea, once one of mine takes more of a beating that might be in my future.
-
I've been flirting with the idea of taking a Dremel to my Pioneer's can opener to remove the blacked out sections. Haven't gotten up the nerve. But being able to get at recessed screws would be a big improvement. Are you thinking of a similar shape?

-
Syph has done it on his mods. I just receive mine on Wednesday and right away I used it to change the batteries on some toys. The standard in-line Phillips was to thick to clear the c'bore.
-
It makes sense since it's really hard to find a can without a pull ring nowadays but recessed philips are very common.
-
I feel like making it a straight technicians screwdriver might make standard size Phillips head screws a problem. And leaving a bit of the can opener around the tip might leave it just as capable for standard phillips, skinny enough to handle medium recessed screws, and still too fat for really deep recessed screws. But the latter option seems like a better compromise if you're carrying a SAK with no other phillips driver.
Do you guys think I'm overestimating the increased standard Phillips capabilities that would be gained by leaving a bit of can opener around the tip?
-
Mine works fine without the can opener bit, and I have a non MT 3mm flat screwdriver that works fine in PH2 screws too.
-
I'll keep my can opener. I have actually used it several time in the last year, in my own kitchen, when I can't find the regular can opener.
-
I just took a Dremel cutting wheel and file to the bottle opener on a Harvester so that it can be used for regular phillips screws. Not exactly the same thing as turning the can opener in to a technicians screwdriver but a very similar exercise. Very happy with the results and feel like it will make a very good summertime/shorts carry along with a Squirt. This is only the 3rd or 4th time I've used a Dremel and it was a piece of cake.


-
Just be careful taking the bottom hook portion off, I believe (from another thread) that it is used as a stop and if removed then the tool will sit deep in the handle denying access to the nail knick.
I might be wrong though. -
@tommywp said:
I just took a Dremel cutting wheel and file to the bottle opener on a Harvester so that it can be used for regular phillips screws. Not exactly the same thing as turning the can opener in to a technicians screwdriver but a very similar exercise. Very happy with the results and feel like it will make a very good summertime/shorts carry along with a Squirt. This is only the 3rd or 4th time I've used a Dremel and it was a piece of cake.Good job. Were you able to shine the part where you ground the metal off or is it rusty there now?
-
I just took a Dremel cutting wheel and file to the bottle opener on a Harvester so that it can be used for regular phillips screws. Not exactly the same thing as turning the can opener in to a technicians screwdriver but a very similar exercise. Very happy with the results and feel like it will make a very good summertime/shorts carry along with a Squirt. This is only the 3rd or 4th time I've used a Dremel and it was a piece of cake.
Good job. Were you able to shine the part where you ground the metal off or is it rusty there now?
Just did this earlier today. Didn't shine it, just cut and filed. No rust or discolorozation problems yet. Will report back if it becomes an issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login