Leatherman PST chronology project
-
Okay now thats a combination that I haven't seen before RZ. A "Japan" knife blade combined with handles that say "LEATHERMAN TOOL" and have an inch-only ruler.
I'd always assumed that my LM Tool was made in Japan and never thought any less of it for that.
Since there's no USA stamp on it anywhere, but there is that "JAPAN" stamped on the blade tang, I always thought the whole thing was made in Japan.
But, you say that only the blade was made in Japan and the rest of it was made in the USA?
Well now that's an interesting theory. Maybe only the knife blade was made in Japan? Could be! :-\
Hey RZ, just to be clear, is the LEATHERMAN stamped in large letter font on your handle? Or small letter font?
No, no, no! That's not my theory. Someone - thought it was you - wrote about LM importing just the blades from Japan.
I've always assumed that my LM Tool was made in Japan.
The "LEATHERMAN" is stamped in a much bigger font than the "TOOL" on my LM Tool.
.
-
@J-sews said:
Hey fellers, I have to leave for a couple days. I haven't gotten a chance to check out Woofer's spreadsheet yet. I also haven't checked out Joe's yet, and he sent it to me yesterday. :PThis project is exciting. Keep the fire burning under it until I get back on Saturday please. I'll have some more info to add then. :)
Bob
Oh, and somebody poke Benner and Def, I know they've got PST's and haven't reported in yet
:D
My bad. -
@appletree_man said:
Couple of snaps.

Also on my KF4 :o [(http://i291.photobucket.com/albums/ll287/multimat426/multitools/77a5ab71.jpg)]
](http://
-
-
NEWS BULLETIN:
Uh-oh. Looks like we've got to totally revamp the chronology in the first post, based on the information received in this thread HERE
:P :D
-
Instead of listing everything I just took a few comparison pics. The one that is dated is # 0495.
-
I do like those big font LEATHERMAN models. :)
-
PST #6
• Rivets or knurled screws?
Rivets
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
Yes, neither
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
LEATHERMAN TOOL, REG'D TM 1325473
• Inch ruler only, or inch/metric?
Inch
• Date codes? What are they?
N/A
• Drop point knife blade or clip point?
Drop Point
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman Japan -
@Spoonrobot said:
PST #6
• Rivets or knurled screws?
Rivets
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
Yes, neither
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
LEATHERMAN TOOL, REG'D TM 1325473
• Inch ruler only, or inch/metric?
Inch
• Date codes? What are they?
N/A
• Drop point knife blade or clip point?
Drop Point
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman JapanSounds like someone got a little something special in the mail today! 8)
-
@Spoonrobot said:
PST #6
• Rivets or knurled screws?
Rivets
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
Yes, neither
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
LEATHERMAN TOOL, REG'D TM 1325473
• Inch ruler only, or inch/metric?
Inch
• Date codes? What are they?
N/A
• Drop point knife blade or clip point?
Drop Point
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman JapanPhotos man photos :ahhh And congrats Spoony well done
-
Hmm. Unsure if it's effective use of time to update the compilation I started, in light of the fact that so many of the parts seem to depend on which parts were most readily available rather than consistent design choices.
-
@woofer said:
Hmm. Unsure if it's effective use of time to update the compilation I started, in light of the fact that so many of the parts seem to depend on which parts were most readily available rather than consistent design choices.The new info from Tim Leatherman really turns this project on its head doesn't it? :-\
-
@ least nobody thought we were close to finishing before he dropped the bomb about the PSTs ::) :D
Man if the project was coming to an end when we got that info then the whole thing would have to have been thrown out the window :( @ least now some of it can be salvaged
;) -
The collected information is most useful if you look at it from a perspective of "Where did LM get its supplies?" stance rather than "What did LM intentionally change?" position.
I had to admit, I kind of wish there were solid design considerations in the move from drop point to saber/clip point blades rather than have the reason be a simple supplier variance. :(
Major changes across the product line like the fat plier heads are so few and far between. -
True, but there were a few purposeful evolutionary changes:
The addition of date coding in November '92
The addition of a hardwire notch to the wire cutter
The addition of the lanyard attachment
Others? -
So according to Tim, the riveted tools are actually a parallel line on the PST family tree, not a sequential developement. (Which clears up a lot of confusion obviously.) So now I'm trying to re-write the chronology, but the question is, where to start??
I've been told that the first PST's did not have a lanyard attachment, and Tim tells us that they were made in USA with knurled screws, so therefore it seems as if either of these could have been the starting point:

Cabelas, Smitty44• Knurled screw construction
• No lanyard attachment
• Small diameter plier pivot
• Only LEATHERMAN cast into plier pivot
• No hard wire cutter notch
• One handle stamped: LEATHERMAN TOOL, US PAT 4238862, PORTLAND OR
• Other handle marked CABELAS
• Inch ruler only, no metric
• No date codes
• Drop point knife blade
• Knife tang not stamped (etched LEATHERMAN USA)
• Milled awl blade
• Off center screwdrivers pivot IN
• Can opener has left hand cut
J-sews #1• Knurled screw construction
• No lanyard attachment
• Small diameter plier pivot
• LEATHERMAN USA cast into plier pivot
• No hard wire cutter notch
• One handle stamped: LEATHERMAN TOOL, US PAT 4238862, PORTLAND OR
• Other handle stamped POCKET SURVIVAL TOOL
• Inch ruler only, no metric
• No date codes
• Drop point knife blade
• Knife tang stamped LEATHERMAN USA
• Milled awl blade
• Off center screwdrivers pivot IN
• Can opener has left hand cutEarliest generation PST's? What do you guys think?
-
:o It is very possible J-sews that yours is as old :) What is the story of how you got that 1 or have you probably already told it
Seems to fit the bill as an old original PST though 
-
Well I am thinking that Smitty's is older, because the plier head on his only says LEATHERMAN, whereas the one pictured below that says LEATHERMAN USA. Plus Smitty was fairly certain that he purchased his PST in 1983, the year they were introduced.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login