Why the Rebar and ST300 are the best cutting MT (for me)
-
Up until recently, my favorite MT cutting tool was the SAK One Handed Trekker. The locking mechanism is good. And I have XXL mitts, so in comparison to traditional SAKs, the extra length + the thumb ramp gives me a better grip on the knife with finer control.

The OHT works good enough for me, that I don't feel the need to carry a separate folder.
Not true for many of the MT plier based tools I have used. In comparison, medium to large size plier-based mulitools tend to work better than a traditional SAK because of the thicker grip, but what kind of grip ergonomics do you really get from a rectangular block of metal with a knife sticking out the end, such as with the Wave?

Many times when I use the knife, I find myself wanting a good folder for the better handle ergonomics.
When I got the Rebar last week, I knew I was trading off quick knife deployment. In some ways I like the knife coming out of the top handle with the Rebar so I can get my thumb out on it (as opposed to the Wave) for a bit finer control, and so I can keep the heel of my thumb off the unlocking pad. But then with the extra handle on the bottom, it makes it difficult for some cutting tasks:

And then I realized something. One doesn't have to have the pliers unfolded all the way to use the cutting tools on the Rebar:

This makes for a completely different grip ergonomics. I can get my thumb out for the finer control like I like, choke up better on the front of the knife with my forefinger, and then the plier head and joint acts together as a palm swell, giving me a good grip with lots of control.

Note with the SOGs PowerLock, which I also previously used, because of the compression plier setup, it's impossible to leave the pliers tucked into one side and thus rather awkward to try to use in this manner:

The ST300, which I also recently got, works well deployed like I did the Rebar:

However, because of the length of the ST300, it might not work out as well for someone with smaller hands. (I'd be curious to know.)
I know. This may seem an obvious use for Rebar and ST300 owners (and certainly Core and other ancestors MTs). But I think others might be surprised. Sure, for quick cutting jobs, blades that can be deployed from the outside on plier-based MTs without opening the pliers have an advantage. But for more fine controlled use of a blade--which includes the saw--I'll take the Rebar or ST300. And I no longer feel like I'm sacrificing so much if I don't carry a regular folder, too.
I'm also wondering if any MTs with pliers have been designed exclusively such that you only use the blades (and perhaps other tools) with handles and plier head in this configuration. It might allow for a different style of locking mechanism. Probably could also go with a bit thicker, chunkier design that would be too uncomfortable with both handles put together (as the Wave above).
-
This is one of the main reasons why the ST300 is my preferred work MT.

-
Great post and pics, I too use this method fairly often

-
I've never even thought of using it like that. Next time I carry it, I'll give it a go.
Great post BTW!!
Sent from my iPad using Tapatalk
-
For a real good 'no hand sliding forward or thumb on the locking tab' type grip just open the pliers fully. ;)
-
This type of versatility is why I tend to prefer the classic Leatherman "tools on the inside" design

-
Interesting discussion.

For my small hands, Skeletool's knife works for me the best in the MT world.
-
Personally, I would prefer a bladeless MT and a dedicated folder :P
That said, good catch, never thought about this. Just tested, the Spirit can also easily be used in the half open for comfy gripping

-
@Etherealicer said:
That said, good catch, never thought about this. Just tested, the Spirit can also easily be used in the half open for comfy gripping
Awesome

It would be interesting if there was more discussion (not here, necessarily) of grip ergonomics for use with the various tools. I hear in reviews discussion of how well the pliers work in that regard, but not so much about how easy it is to torque a screw with a particular MT, or finer considerations of how easily one can manipulate the blade.
-
You can also unfold the ST300 like this to reach out with the blade while holding the back half. I've used this method a couple times to cut plastic wrap I couldn't reach.
-
Now THAT is a great comparison!
I never thought to hold them open actually. I traded/sold off my ST300 and PST2 partly because I couldn't cut level with main straight edge of the blade
And the only thing near me is my Wave to compare the grip
Here is how NOT to do it

-
@NKlamerus said:
Now THAT is a great comparison!I never thought to hold them open actually. I traded/sold off my ST300 and PST2 partly because I couldn't cut level with main straight edge of the blade
And the only thing near me is my Wave to compare the grip
Here is how NOT to do it

Owww! That makes me cringe just looking at the picture of your hand up by the edge of the blade like that with that grip.
Which reminds me that the splayed handle grip (seems like a good name for it) of the Rebar, ST300, etc. would be much better for any sort of stabbing motion or other cutting jobs with an MT where your hand might move foward. Not only is your hand back from the blade edge compared to a normal grip, but the joint with the swell of the pliers allows you to anchor your hand back more firmly. Particularly with a stabbing motion, it would easy for the hand to slip forward onto the blade, although obviously much more likely with the plier-based MTs like the Wave with the knife opening from the bottom grip of the handle like that.
-
@Etherealicer said:
Personally, I would prefer a bladeless MT and a dedicated folder :PThat said, good catch, never thought about this. Just tested, the Spirit can also easily be used in the half open for comfy gripping

+1 MultiTool blades suck in general. I really like my Spirit butter blade for its overall utility, but ergonomics sucks. For general cutting tasks it's the Pioneer in my pocket.
Sent from my iPad using Tapatalk
-
I've used this technique for years with my PST and Supertool to get that extra inch needed for a screwdriver to reach. I'd be kind of nervous using this grip with a non locking tool
-
I don't have a Micra, but based on this picture I found at Bladeforums, it looks like the handle can be extended. Bit awkward, but better than not at all given the small size of the Micra:

-
@raistlin65 said:
I don't have a Micra, but based on this picture I found at Bladeforums, it looks like the handle can be extended. Bit awkward, but better than not at all given the small size of the Micra:
Yes, the Micra's blade is more usable this way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login