And so it begins.... (My adventures into Alox!)
-
@neillcurrie said:
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
-
It's too bad wenger parts won't fit. I've ran into both left and right handed straight screwdrivers.
Sent from my iPhone using Tapatalk
-
@Syph007 said:
I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.Why not just make a new nail nick in the opposite side?
-
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
Bottle opener and blade would be awesome.
Still a fan of a bit driver on a 93 though.
-
Another Ti Cybertool born today. :D









-
That's rather tasty.
-
Syph my friend. You have accomplished what I tried to when I first joined and learned of this place. My hat is off to you.
Sent from my iPhone using Tapatalk
-
@tattoosteve99 said:
Syph my friend. You have accomplished what I tried to when I first joined and learned of this place. My hat is off to you.Sent from my iPhone using Tapatalk
I'd like to build a few different configurations of these for myself, but damn the donors for cybertool mods are crazy expensive.
-
I want one [emoji45]
Sent from my iPhone using A box of monkeys on a treadmill and a quantum leap
-
My 10 amp power supply arrived! Now I just need sulfuric acid and apparently I can get that at NAPA.

My BO parts were also ready!

This time Ive got 15 tinkers, 10 spartans. Ive also got 10 inline awls from 93s that will be going in place of small blade as a different option, and 10 saw layers.
Last time I sold these all on facebook in a couple of hours so I'll probably offer them there again. Give me a should today if you want any. I have black alox liners to use for these builds as well.
-
Sounds like someone will be busy tinkering ;)
-
I'm liking the 93mm awl in place of small blade option. Conveniently I am low on small blades and have lots of extra inline awls, so it works out well.







-
Great idea of using the inline awls...nice work Syph.
-
Dual blade madness! With 'security' feature of impossible to access small blade!




-
Sweet!!!
-
Dual blade madness! With 'security' feature of impossible to access small blade!




I've been wondering about that "security" feature also with an 84mm multi-blade. :-\ That and the blade-liner-washer-spacer problem is making me think about not doing it.
Thats why the 93mm is the perfect frame. Symmetrical. On that frame I could have flipped around of the blade layers. Cant do that on any other one.
-
Maybe it is just me but I prefer the 91mm over the 93mm. :)
-
But got to admit it would be nice to see the BO double madness on the 93mm frame so the one of the main blades can be flipped.
-
USA alox color scheme.






Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login