Bring it back! (KF4 Appreciatcion Thread)
-
@NeitherExtreme said:
Every once in a while, a company gets things just right, and creates a darn near perfect product. And unfortunately, sometimes that product doesn't survive. Such is the case for the humble yet wonderful Juice KF4 from Leatherman.That LM discontinued the Kf4 is incredibly frustrating, and they did the same thing with the PST.
Both PST and Kf4 were exceptional tools, offering the greatest functionality in their weight class of 5 to 5.5 oz.
If LM had replaced Kf4 and PST with something better, then it would make sense to drop them from their product lineup. But, they dropped both without offering newer models of equal capability in their weight class.
Kf4 is the only Juice model I was tempted by, because it had everything I wanted and nothing I didn't want:
-no corkscrew!
-no canopener!
-no scissors!
-file
-awl
-slothead drivers
-Phillips driver
-pliers big enough to be useful for light-medium duty tasks
-plain and serrated blades
-woodsawFitting all of that functionality into a tool of less than 5.5 oz and 3.25 inches is an amazing accomplishment.
Compare the list above to the limited functionality of the new Skeletool (at about the same weight) and which tool looks the best?
.
-
Though the K4 is nice, I still perfer my XE6
-
The Kf4 is my favorite Juice. It's not perfect mind you - the hardly-ever-used-saw should be replaced by scissors - but it's better than the rest. I cannot for the life of me understand why it alone was discontinued. :(
-
Even an old dog like me likes the looks and tools involved,I would even pay extra if they came back with a same model with S30V,or CM154 blade,and titanium handles.

-
@J-sews said:
The Kf4 is my favorite Juice. It's not perfect mind you - the hardly-ever-used-saw should be replaced by scissors - but it's better than the rest. I cannot for the life of me understand why it alone was discontinued. :(The Saw is the only drawback in my mind. Not only should it not have a saw in the first place IMO, but the one it has is pretty poor as well.
-
The Kf4 is my favorite Juice. It's not perfect mind you - the hardly-ever-used-saw should be replaced by scissors - but it's better than the rest. I cannot for the life of me understand why it alone was discontinued. :(
The Saw is the only drawback in my mind. Not only should it not have a saw in the first place IMO, but the one it has is pretty poor as well.
OT:
I've never been tempted to use the saw on a Juice tool. Does it not perform very well then? -
Besides being too short to be practical,the saw struck me as being on the flimsy side,as for sawing,I don't know,I didn't saw anything with mine.Scissors would be a better option in the saw's place.
-
I have to agree with Bob on that one...
It's not really that bad, but it certainly isn't the kf4's strong point, and I too would rather have scissors.
Def
-
Sounds like there's a few more fans out there than just me! :)
I was guessing some people would ask for scissors, as they seem to be about the "favorite" implement that the KF4 lacks. Although I love the current setup, I'd also be happy to see the serrated blade switched with scissors...
I'm kinda surprised by the lack of enthusiasm for the saw... I can understand not wanting a MT-sized saw in general, but IMO the Juice saw is a standout feature on the KF4. I've used it fairly often, both on wood and drywall, and I've been very happy with it. Also, even though the KF4 is so much smaller, the saw has the same cutting length as the Wave, Charge, and Surge. :o I think it's a great design. :) The saw and awl combo make a great drywall pair by the way.
I think I'll take a pic comparing the saws and post it here tommorrow. :)
-
Don't you find it to have a lot of play on the pivot and be very flimsy?
-
@Benner said:
Don't you find it to have a lot of play on the pivot and be very flimsy?I haven't.
It is somewhat thin, but I've always seen that as a good thing for a saw... I've only had good experiences with it. Do you think your pivot pin might be too loose?While we're on the subject, I remember Def's had a little issue with it "springing" over into the awl's way. Does yours do that? Neither of mine do...
-
Think there was a post on here about Marshall's having both PSTs and KF4s. I saw them at one here in Houston. Of course i was broke at the time. >:(
-
Don't you find it to have a lot of play on the pivot and be very flimsy?
I haven't.
It is somewhat thin, but I've always seen that as a good thing for a saw... I've only had good experiences with it. Do you think your pivot pin might be too loose?While we're on the subject, I remember Def's had a little issue with it "springing" over into the awl's way. Does yours do that? Neither of mine do...
It doesn't really appear to be too loose. Everything else seems to be ok. :-\
Mine doesn't get in the way of the awl no.
-
@Defender said:
I have to agree with Bob on that one...It's not really that bad, but it certainly isn't the kf4's strong point, and I too would rather have scissors.
Def
The saw is my least favorite implement on the Kf4.
Kf4 has 4 long slots available for implements, and 3 slots are filled with plain edge blade, serrated blade, and file leaving 1 slot open.
LM chose to fill that slot with a woodsaw, but they could have chosen scissors.
I've never had much enthusiasm for woodsaws on small multis and SAKs - I have difficulty getting much use out of them due to their shortness. Given the choice of what implement to put in that last slot, I'd probably choose scissors over a saw.
It'd be great if LM would bring back the Kf4 and offer:
-current Kfw4 model with woodsaw
-additional Kfs4 with scissors in place of woodsaw.
-
I have to agree with Bob on that one...
It's not really that bad, but it certainly isn't the kf4's strong point, and I too would rather have scissors.
Def
The saw is my least favorite implement on the Kf4.
Kf4 has 4 long slots available for implements, and 3 slots are filled with plain edge blade, serrated blade, and file leaving 1 slot open.
LM chose to fill that slot with a woodsaw, but they could have chosen scissors.
I've never had much enthusiasm for woodsaws on small multis and SAKs - I have difficulty getting much use out of them due to their shortness. Given the choice of what implement to put in that last slot, I'd probably choose scissors over a saw.
It'd be great if LM would bring back the Kf4 and offer:
-current Kfw4 model with woodsaw
-additional Kfs4 with scissors in place of woodsaw.
Here here, I agree entirely! :)
sidebar: and leave the inch/metric ruler etched on the side. Its not used much, but it doesn't take up any space and occasionally comes in handy.
-
The ruler is a big bonus to me. I actually use it quite a lot and it's the only downfall of the Spirit IMO.
-
I added a poll about possible configurations here.
As promised, here's comparison shots of the Charge, KF4, and Surge...

-
...Which I think is pretty good considering the difference in the overall sizes of the tools. :) I personally think the KF4 makes a great hiking/camping tool, partly because of the "large" saw in such a small tool.
I don't have any Vics, Sogs, etc. to compare, but if anyone else wants to take a pic, I'd be interested.


-
any help?
it aint kf4 but same size.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login