tips on kydex
-
Can't wait to see how it turns out.
Nate
That's us mobile -
Mike, have you try put a pocket clip on Rebar?
Seen like it is a simple solution to your problem. -
yes of course I tried the clip on my stainless steel rebar
and I did alot of research on that
but what I never read, was the clip slides over like crazy
so when using the tool it slides over either direction getting in the way
no matter how tight you get it, actually if you go too tight it binds up all the tools so you can even open them
and because the shape of the rebar I scratched the crap out of the heads on the bolts or whatever the fasteners are called
and yes I did use the inner bolt part off the kick too when attaching the clipand I didnt want to go through all that again by putting a clip on my black one
because I know it will be the same and will tear up the finisheven the tool the clip came off of, the kick still had some sideways play
but on the rebar it was way too much for meI want something solid in my hands when using it, not having a clip move around and make me change my grip
-
If you installed the clip correctly it shouldn't get in your way.
It flexes when you put pressure on it but it won't come off unless you want it to, razor blade required.
-
yes ive seen that type here, like I said I did some research on clips
and last I read on this site it wasnt being made anymore
and whatever link that was on this site didnt open either
not saying you still cant find them, but whatever I read here didnt bring up anyplus one other thing with that, its not in BO color
so that matters to me alsoplus what im making I really dont think is too much of an ordeal to do
cut out the shape, heat up and thats itif I could wear a belt I would just use the sheath but overalls dont have belt loops on them
and its too heavy to carry in my pockets and I have nice side pockets but im afraid when sitting it could slip outone last option was to see if the skinth could make something to fit in the pocket
but I think I can rig up something with kydex and not be too thick or heavy -
They are commonly available and there are black ones made of plastic.
Good luck with the project.
-
yeah plastic probably wouldnt hold up too much as I use it alot and not sure how thick materiel it could handle
and I could probably powdercoat the metal ones black and match well with the BO color
but then I would need to find that good tape because im guessing it comes with the tape already attached and I would need to remove it to powdercoat
plus I oil my tools alot, and not sure how well those tapes hold up to oils
I know ive used wd40 to remove sticky tape residues so I would guess it could soften up the material its made from -
I used 40lbs 3M tape from home depot, it is pain in butt every time i tried to remove it, even i bathed it wd40 for hours.
The modern plastic is not to be underestimate. -
Again modders here can easily install a Kick clip on Rebar.
-
Anyway, it just a suggestion, the nite ize clips dont work well for everyone, you have to try it to know for sure.
-
I put pocket clips on my two Rebars per zoidberg they are working out great.
-
@Kampfer said:
Again modders here can easily install a Kick clip on Rebar.maybe you didnt see I had posted I also installed a kick clip on my rebar
but what I never read was no one mentions that the clip moves alot
so when you open the tool the clip shifts over 1/4 inch
when you use it your moving the clipI dont want a loose feeling clip
its bad enough using the kick clip on the kick
that also moves a littlebut on the rebar it moves twice as far
so for me the kick clip is not an option, I didnt want to tear up my new BO finish trying to put on the kick clip only to have it mover all over -
@zoidberg said:
Have you seen this thread? Six months of use and no movement. And you can buy black oxide pocket clips here.yes thats one of the first ones I read, before I even had my rebar
and yes I have a brand new BO clip, uninstalled I got off ebay
read my post above this one
My stainless steel rebar had that clip installed and I didnt like how they fit so I dont want to ruin my BO finish using a clip that fits looseand yes I used the threaded bolt thing off the kick too when installing the clip on the rebar
-
Got the kydex in today
little thinner then I thought, but its fine
Next thickness was like 3x the costanyways got it made, and works good so far
wont really know want to use it for a few days firstOne thing I didnt catch was its a little too short, the overall length
So far its not an issue, but originally I wanted it to be as tall as my button so when snapped it wouldnt slide up or downas you can see its about 1 inch short
so it will slide up when pulling out, and down when pushing in but the button keeps it inside the pocket which is how I designed it
will this be an issue later, cant sayI may have enough material to make 2 more, but for sure 1 more
and at under $4 not too much cost even if I had to buy another sheetalthough ugly to look at, its totally hidden
locks in nicely, pulls out nicely
and I can press it in smoothlyI barely flared the outer edge with pliers not sure if I need heat to keep its shape
will see how it holds up after a few days use
see if I need to modify the design any
here's how it sits, just enough to pull it out

-
Looks like an easy solution .....way to go

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
to master modder