Schrade Style MTs
-
I can recall my father getting a Schrade back in the 90s. He loved the design...but when he had to use the pliers for the first time, it got relegated to the sidelines. It was his "dress" MT until he got the Leatherman Pulse. After that, it was primarily a shelf queen.
Funny enough, he warned me that I might not like the Coleman Pro Lock because of the same reasons he didn't like the Schrade Tough Tool. Mind you, I didn't listen...and thankfully I didn't as I was able to acquire a fairly rare for today tool with a unique feature that I loved at the time...removable tool pods.
You see, the first time he used his Schrade, his hand would slide towards the pliers...and admittedly, this is one of the detractions of this style. I was forced to agree with him after I purchased my Coleman Pro Lock...but I only agreed with him a year later as I was sort of flying high on my first admittedly good quality MT purchase.
You could say that the style is rather antiquated today...and I am sad to say that Taylor Tools had cheapened the Schrade Tough Tool name with lackluster quality and abysmal quality control. They certainly lack the quality of the first Schrade USA made tools. Admittedly, the newer ones are far cheaper than the older ones...so you do get what you pay for. Problem is, even at 20 something bucks for a new Taylor made branded Schrade...you are probably still paying too much.
With that in mind, you don't see too many of this style tool out in the wild. I think I may have seen only one or two knock offs...and those were a few years ago now.
From left to right: Coleman Pro Lock, Various generations of Schrades, Design knock off.



All in all, if you see a Coleman Pro Lock...get one...and buy a lottery ticket. If you need a Schrade Tough Tool, stay away from the cheap newer ones...much like my black painted Taylor junk in the above photos...yes, it is not black oxide. Keep to the older models and marvel at their quality, weight and feel. As for the knock off, it is well built and interesting enough due to its design heritage.
-
The Tough Tool is an odd duck for sure, but I know of two of them that still see everyday use. My boss carries a later US made one every single day, and a contractor we deal with has a first generation one with the rivited plier head. The one I have is also a first gen, and despite not being the most ergonomic tool I've used, is a beautifully built, rock solid, very high quality piece. The build quality of this tool surprised me very much to be honest. Not too long ago a salesman tried to offer us a display of the Taylor made ones to sell at the store. I told him we were trying to keep our customers.....
-
I like that design a lot !

Also.. Scharade is the only one that manufactured a Multitool with Box Joint Pliers !
-
I like the looks of the Schrade tools. I have read a lot of negative comments on the newer tools. But there is just some thing about the design I like. I own a newer model (cheapo) and do not use it. I bought it to see what it was like not to use.
-
Due too its design are the tools short or are the handles long
I've oddly been interested in these for a while but not handled one yet 
-
I seem to have a soft spot for the USA made Schrades (including the rebadged ST5E marketed as a Craftsman 45471), in fact I've been buying several of the early build Tough Tools on eBay recently.
I have to agree that the Taylor (made-in-china) versions would be poor value even if they gave them away for nothing. They are just rubbish. It's very sad when you compare with quality of the USA versions.
-
If you ever stop and think the new China made ones can't be as bad as everyone says, remember that Bob crushed one with his bare hands at SHOT last year.
Nuff said.
Def
Sent from a digital multitool
-
@Zed said:
Due too its design are the tools short or are the handles long
I've oddly been interested in these for a while but not handled one yet 
well took me 2 years but i finnaly got one,its a very interesting mt,handles are odd and rather strange to use in plier mode,there long and bulky back end,its a very solid mt and can see it useful in a tradesman type job or for home diy,very pleased to have one and cant wait to try it out


-
If it's not a USA made one then don't squeeze it too hard!
Def
-
@Grant Lamontagne said:
If it's not a USA made one then don't squeeze it too hard!Def
:D mine looks like a series 1 with 6 piece pliers,U.S.A on the pliers
i would pick a cheapy up if dirt cheap,but wouldnt pay £20 for one,i oddly like the st1,but then i always go for the underdog :D im not sure about the locking mechanism, only 2 tools either side lock and the others dont even snap in place
possibly ive been spoilt by the vic spirit 
-
@Grant Lamontagne said:
If it's not a USA made one then don't squeeze it too hard!
Def
:D mine looks like a series 1 with 6 piece pliers,U.S.A on the pliers
i would pick a cheapy up if dirt cheap,but wouldnt pay £20 for one,i oddly like the st1,but then i always go for the underdog :D im not sure about the locking mechanism, only 2 tools either side lock and the others dont even snap in place
possibly ive been spoilt by the vic spirit 
Still, looks v cool Zed.

-
@Grant Lamontagne said:
If it's not a USA made one then don't squeeze it too hard!
Def
:D mine looks like a series 1 with 6 piece pliers,U.S.A on the pliers
i would pick a cheapy up if dirt cheap,but wouldnt pay £20 for one,i oddly like the st1,but then i always go for the underdog :D im not sure about the locking mechanism, only 2 tools either side lock and the others dont even snap in place
possibly ive been spoilt by the vic spirit 
Still, looks v cool Zed.

works ok with my big hands ;) -
@THE_LONGBOW said:
I like the looks of the Schrade tools. I have read a lot of negative comments on the newer tools. But there is just some thing about the design I like. I own a newer model (cheapo) and do not use it. I bought it to see what it was like not to use.I always thought the ones I saw on pictures were really really ugly but different. When I got my hands on one (Usa made) I was surprised how rigid they are. Thought they were gonna be wobbly but they aren´t.
Nowadays I like the quirky look of them especially in real life. -
I like its industrial appearance, now to find the tough tool club

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login