Cybertools name change?
-
By the way I can still see the 29, 34 and 41 names

-
I own a 34, it doesn't have a file in the hook.
Victorinox counts (copy from original manual)
- large blade
- small blade
- corkscrew
- can opener with
- -small screwdriver 3 mm
- cap lifter with
- -screwdriver 6 mm
- -wire stripper
- reamer, punch
- key ring
- tweezers
- toothpick
- sewing eye
- wrench with
- -5 mm female Hex drive for D-SUB connectors
- -4 mm female Hex drive for the bits
- -Bit Philips 0 (Pozidrive)
18 -Bit Philips 1 (Pozidrive) - case with
- -bit Slotted 4 mm
- -Bit Philips 2
- -Bit Hex 4 mm
- -Bit Torx 8
- -Bit Torx 10
- -Bit Torx 15
- pressurized ballpoint pen
- -also to set DIP-switches
- pin stainless steel
- mini-screwdriver 1.5 mm
- pliers with
- -wire crimping tool
- -wire cutters
- scissors
- multi-purpose hook
I don't count 14 nor 19 either because those are not usable tools. Nobody counts this way:
...
4. large blade
5. scales with
6. -toothpick
7. -tweezers
...Scales able to hold more tools are nice, but are only structural
Now, I don't count 27 either because reasons. Obvious reasons.
@Reinier said:
By the way I can still see the 29, 34 and 41 names
Try hitting Ctrl+F5 (you could have the old version cached)
-
Let go through this. I made some assumptions from the photo of the CyberTool 34.
Bit wrench can be used with other bits, so yes it's a tool. If I had a bit driver in my pocket I would call it a tool.
-
Large blade
-
Small blade
-
Scissors
-
Pliers
-
Can opener
-
Small flat blade screwdriver
-
Cap lifter
-
Large flat blade screwdriver
-
a poor excuse for a wire stripper, aka wire snapper
-
tweezers
-
toothpick
-
straight pin
-
pen
-
micro-screwdriver
-
multi-purpose hook
-
awl
-
corkscrew
18- 33. Eight double sided bit tools? -
keyring
-
dip switch setter
-
-
Kosmo you counted the bits twice I think (there are four, not eight, the photo is misleading).
-
@wmoco said:
Try hitting Ctrl+F5 (you could have the old version cached)Nope, it redirects to a different site depending on your country/region :(
http://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Medium-Pocket-Knives/CyberTool-29/p/1.7605.T -
@Reinier said:
Nope, it redirects to a different site depending on your country/region :(
http://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Medium-Pocket-Knives/CyberTool-29/p/1.7605.TErrrr... your link sends me this:
We apologize, the current page you are looking for cannot be found.And my CyberTool 34 / Cybertool M link is actually this:
http://www.victorinox.com/ch/product/Swiss-Army-Knives/Category/The-Original-Swiss-Army-Knives/The-Original-Swiss-Army-Knives-91-mm/CyberTool-M/1.7725.TSo, thanks to mt.org now you know before all your neighbours about the new names

-
Yes, and the link in your first post gives a 404 when visiting from Europe. Like I said, the Victorinox site redirects to different sites/pages depending on where you're visiting from. Really annoying, it breaks a lot of links from Google results as well.
-
Here you go

-
It still says 29, 34, 41 for me. No S, M, L.
-
So, both Europe and US have the old names?
I'm the one living in the third world and having the cool news before everyone?




-
-
So, both Europe and US have the old names?
I'm the one living in the third world and having the cool news before everyone?




Nah... we have them too

although it makes me sad, because that means there are no new models planned that go in-between...Cybertool 2.5? :P
It's just naming. For a long time we didn't have Spirit X or S. They were called Spirit II, Spirit III,...
-
So, both Europe and US have the old names?
I'm the one living in the third world and having the cool news before everyone?




Nah... we have them too

although it makes me sad, because that means there are no new models planned that go in-between...Cybertool 2.5? :P
It's just naming. For a long time we didn't have Spirit X or S. They were called Spirit II, Spirit III,...
Shouldn't that be Cybertool SM (with built in whip maybe?).
-
So, both Europe and US have the old names?
I'm the one living in the third world and having the cool news before everyone?




Nah... we have them too

although it makes me sad, because that means there are no new models planned that go in-between...Cybertool 2.5? :P
It's just naming. For a long time we didn't have Spirit X or S. They were called Spirit II, Spirit III,...
Shouldn't that be Cybertool SM (with built in whip maybe?).
How about Cybertool XS, with every damn tool in it a la Wenger Giant? ;)
(hint: its not extra small, read it aloud)
-
Access? :P
-
Excess?
-
@Etherealicer said:
Nah... we have them too
although it makes me sad, because that means there are no new models planned that go in-between...Makes total sense. When a given company splits his website, we in SA usually get linked to the NA version.
I find it extremely cool to have the same version as Swiss people for the Vic site. :)The only model I can see as a total success would be the 34/M minus the pliers, since it would shave one of the most expensive layers but still have scissors which probably is the most demanded layer besides the two base ones.
Don't forget that in the last years Vic added dozens of "new" models from Wenger. Those needed minor adaptations, space in lines of production, rethinking of supply acquires, and a ton of company work which would be very similar to the needed for "let's make a new CyberTool".
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login