Breezy's EDC mods for Mod User merit badge (with bonus flashlights!)
-
and yes, I'm taking a page out of zoidberg's book by posting these pics as 3 separate posts in the same thread... gotta get my post count up somehow. :D
-
Love them!

-
My i3S doesn't have XP-G2 on it.

-
I should write a book on spamming.
-
And put lots of pics in it. :)
-
My i3S doesn't have XP-G2 on it.


when did you get yours? I've had mine for about a year and a half now. I'm guessing that XP-G2 refers to the LED?

(in case it's not painfully obvious, my knowledge of flashlights is somewhat limited...)
Earlier this year. And yes, it refers to the LED. So a year plus onwards and you're still liking it?
-
My i3S doesn't have XP-G2 on it.


when did you get yours? I've had mine for about a year and a half now. I'm guessing that XP-G2 refers to the LED?

(in case it's not painfully obvious, my knowledge of flashlights is somewhat limited...)
Earlier this year. And yes, it refers to the LED. So a year plus onwards and you're still liking it?
absolutely. it fits my EDC needs perfectly. compact light with a pocket clip (I carry mine in my front left pocket, and don't like to carry anything larger than a 1xAAA light for EDC), great UI that is stupid simple to use, and great high/med/low levels. I haven't found the need for anything brighter in an EDC light, medium is good for most things, and the moonlight low is great for checking on minions in the middle of the night. ;)
I have a few other lights that I use for camping, home projects, or anything where I feel the need for more lumens, but for an EDC light, this one fits the bill.

-
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.
why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

-
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.
why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

actually, I was just working on a custom ReCharge for someone, and while working on the file mod, I thought to myself, "it sure would be nice to have a bench grinder..."

:P
-
[quote author=Breezy12 link=topic=59284.msg1084137#msg1084137 date=1430945068]
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

actually, I was just working on a custom ReCharge for someone, and while working on the file mod, I thought to myself, "it sure would be nice to have a bench grinder..."

:P
[/quote]
I want one as well. Till then the angle grinder kid combo will have to do. :P What were you doing to the file? -
[quote author=pingu link=topic=59284.msg1084294#msg1084294 date=1430980997]
[quote author=Breezy12 link=topic=59284.msg1084137#msg1084137 date=1430945068]
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

actually, I was just working on a custom ReCharge for someone, and while working on the file mod, I thought to myself, "it sure would be nice to have a bench grinder..."

:P
[/quote]
I want one as well. Till then the angle grinder kid combo will have to do. :P What were you doing to the file?
[/quote]hmmm... my oldest is 8... I might have to try that combo.

I was just hacking the end of the file to fit into the removable pocket clip/lanyard ring slot. I didn't take any pics today, but here's a pic of one that I did awhile ago:

Kampfer originally came up with the idea, but I've had several people request it since then. cutting the shape to match isn't too difficult, but thinning the end of the file to actually fit in that slot is very time consuming. I have a pretty good method down after doing 4 or 5 of them, but it's still a PITA. I think I'm gonna have to either stop offering that option to people, or charge extra for it.
-
[quote author=Breezy12 link=topic=59284.msg1084305#msg1084305 date=1430983149]
[quote author=pingu link=topic=59284.msg1084294#msg1084294 date=1430980997]
[quote author=Breezy12 link=topic=59284.msg1084137#msg1084137 date=1430945068]
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

actually, I was just working on a custom ReCharge for someone, and while working on the file mod, I thought to myself, "it sure would be nice to have a bench grinder..."

:P
[/quote]
I want one as well. Till then the angle grinder kid combo will have to do. :P What were you doing to the file?
[/quote]hmmm... my oldest is 8... I might have to try that combo.

I was just hacking the end of the file to fit into the removable pocket clip/lanyard ring slot. I didn't take any pics today, but here's a pic of one that I did awhile ago:

Kampfer originally came up with the idea, but I've had several people request it since then. cutting the shape to match isn't too difficult, but thinning the end of the file to actually fit in that slot is very time consuming. I have a pretty good method down after doing 4 or 5 of them, but it's still a PITA. I think I'm gonna have to either stop offering that option to people, or charge extra for it.
[/quote]I've made a few tools fit there but they break really easily so I don't bother with that any more. The file I made to fit the bit driver was much better.
-
[quote author=zoidberg link=topic=59284.msg1084311#msg1084311 date=1430984174]
[quote author=Breezy12 link=topic=59284.msg1084305#msg1084305 date=1430983149]
[quote author=pingu link=topic=59284.msg1084294#msg1084294 date=1430980997]
[quote author=Breezy12 link=topic=59284.msg1084137#msg1084137 date=1430945068]
last but not least is a very simple mod I did -- adding the plier head and knife blade from a Squirt PS4 to the body of a Style CS.why the small notch in the spine of the ex-PS4 blade?
mostly because the Dremel slipped...

Must be nice modding with a Dremel...

actually, I was just working on a custom ReCharge for someone, and while working on the file mod, I thought to myself, "it sure would be nice to have a bench grinder..."

:P
[/quote]
I want one as well. Till then the angle grinder kid combo will have to do. :P What were you doing to the file?
[/quote]hmmm... my oldest is 8... I might have to try that combo.

I was just hacking the end of the file to fit into the removable pocket clip/lanyard ring slot. I didn't take any pics today, but here's a pic of one that I did awhile ago:

Kampfer originally came up with the idea, but I've had several people request it since then. cutting the shape to match isn't too difficult, but thinning the end of the file to actually fit in that slot is very time consuming. I have a pretty good method down after doing 4 or 5 of them, but it's still a PITA. I think I'm gonna have to either stop offering that option to people, or charge extra for it.
[/quote]I've made a few tools fit there but they break really easily so I don't bother with that any more. The file I made to fit the bit driver was much better.
[/quote]I've had the same experience, but people still seem to want them, so...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login