84mm modding questions.
-
Yes , yes and no :P
Sent from my iPhone using Tapatalk
-
@tattoosteve99 said:
Yes , yes and no :PSent from my iPhone using Tapatalk
No saw is alright. The Electrician blade and scissors will fit?
-
Should yes. Some 84s have a electrician blade. I can make it fit.
Sent from my iPhone using Tapatalk
-
@tattoosteve99 said:
Should yes. Some 84s have a electrician blade. I can make it fit.Sent from my iPhone using Tapatalk
I didn't know if you had a electricians blade form a 84mm or not.
-
Hmm... I think I have a mod like this from RickinFl from a while back

<a href="http://s1341.photobucket.com/user/mrynnr/media/MT/E53175C2-845D-4A0D-A856-AFD07115C9F1_zpsttrfygl8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1341.photobucket.com/albums/o757/mrynnr/MT/E53175C2-845D-4A0D-A856-AFD07115C9F1_zpsttrfygl8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@captain spaulding said:
Should yes. Some 84s have a electrician blade. I can make it fit.
Sent from my iPhone using Tapatalk
I didn't know if you had a electricians blade form a 84mm or not.
There have been a few 84mm Electrician's knives showing up on Fleabay in as many weeks. Not in new or unused condition however.
-
@mrynnr said:
Hmm... I think I have a mod like this from RickinFl from a while back
<a href="http://s1341.photobucket.com/user/mrynnr/media/MT/E53175C2-845D-4A0D-A856-AFD07115C9F1_zpsttrfygl8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1341.photobucket.com/albums/o757/mrynnr/MT/E53175C2-845D-4A0D-A856-AFD07115C9F1_zpsttrfygl8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Now I really want to do this mod. At least a blade swap with the Electrician's blade. I'm going to wait until I have a little more practice with the peening, however. I would want to mess up the Alox scales.
-
@PTRSAK said:
No problem with questions.There is a 84mm vic saw. A My First Victorinox plus is the easiest place to find one.
The 85mm Wenger saw will also fit fairly easily. Check my tutorial thread in the modding guides sticky. That also shows how to fit the Wenger scissors into a 84mm Vic.AFAIK the Electrician blade fits but it needs the pivot hole filed and redrilled to make a nice job of it.
Looks to me that the hooked top on the pruner blade would be to deep. but that's a guess. I haven't looked at it.Not sure about the awl but i think i saw where someone had done it. No idea how easy or hard it is.
No doubt some of the other hackers will be able to give more answers.
The other way to get rid of the play on a 3mm hole to a 2.2mm pin, is to buy the brass rod that is 3mm OD and 2.2mm ID and cut off a little piece and use it as a bearing. It works rather well. On a second thought that might be to a 2.5mm hole?
-
In case someone is still following this thread, the Electrician's blade I removed from my 84mm Electrician Cellidor has a 3mm hole. It looks like they used the Electrician's blade directly from the 93mm. No modification was done to use with the 2.2mm pin. I also compared it to the 93mm Pruner blade and it looks like it will probably fit in the 84mm. The length of the tip might come in contact with the liner, but the liner can probably be modified.
I would like to try using the 93mm awl in the 84mm. Sometime I may get a Pioneer Harvester or Rancher and tear it down for these parts.

-
Quick question: what are the diameters of the brass rods on the 84mm?
Thanks!
-
2.2 mm
See the sticky at the top of this board for more detailed info: /topic/43303
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
