Hook without scissors?
-
Thanks for your input zoid, I'll have to consider that.
Your way, if it is easier, needs only parts found on a Compact.I'm looking for a comparison picture of the springs on the saw and scissor layer, ideally with the respective tools sitting nearby, anyone got one?
Edit: Found this. Is the saw spring on a champ the same as this? It seems that just getting this spring and a hook might be the easiest route?
https://www.flickr.com/photos/ufobike/8332380886 -
@Pablo O'Brien said:
Thanks for your input zoid, I'll have to consider that.
Your way, if it is easier, needs only parts found on a Compact.I'm looking for a comparison picture of the springs on the saw and scissor layer, ideally with the respective tools sitting nearby, anyone got one?
Edit: Found this. Is the saw spring on a champ the same as this? It seems that just getting this spring and a hook might be the easiest route?
https://www.flickr.com/photos/ufobike/8332380886Yes the saw spring is the same size. I'm sure you know this already but I'll mention it anyway, in that pic the scissor spring (Q) is upside down.
-
Oh thanks, I did not notice that about the scissor spring. Its obvious in hindsight though.

It seems like the path of least effort is to use that saw spring, but then I would have to grind down the entire hook to make it fit, and I dont have the tools for that.On top of that, the hook "fits goofy". I'm starting to wonder if this is futile.

-
@Pablo O'Brien said:
Oh thanks, I did not notice that about the scissor spring. Its obvious in hindsight though.
It seems like the path of least effort is to use that saw spring, but then I would have to grind down the entire hook to make it fit, and I dont have the tools for that.On top of that, the hook "fits goofy". I'm starting to wonder if this is futile.

That is why you go with the scissor spring. Only have to grind a little where the end of the saw sits and pack it out with a washer.
-
I could be wrong though, it happens. I would listen to Syph.
-
You may be wrong, but it makes sense, like syph. :)
I thought that extra effort would be needed with the scissor spring? Looks like I was confused.
How do you grind just right for good snap? Practice? -
@Pablo O'Brien said:
You may be wrong, but it makes sense, like syph. :)
I thought that extra effort would be needed with the scissor spring? Looks like I was confused.
How do you grind just right for good snap? Practice?You would be grinding where the end of the saw sits, not the pivot end, so the snap should already be okay.
-
Looking at the picture above, it seems that on the scissor spring on where the saw pivot end would go, it is a different shape than the saw spring in the same area. ???
-
@Pablo O'Brien said:
Looking at the picture above, it seems that on the scissor spring on where the saw pivot end would go, it is a different shape than the saw spring in the same area. ???The part of the spring that contacts the tool is the same. The scissors and saw share the same pivot shape. It will work. ;)
-
That upside down pic of the scissor spring is smurfing with my head.
;)
When I mentally imagine it the right way up, I begin to see what you mean.Thanks for answering my questions. :)
-
@Pablo O'Brien said:
Thanks Syph, thats exactly what I was looking for. :)About the weird fit of the hook, yes I noticed it in pictures. The pivot end is round while the other tools have a square pivot end, right?
Unfortunately, I dont see a way to get a square end on the hook, since that would envolve <u>adding</u> metal, not taking/grinding it away. :-
Anyone got an idea?Thanks.
Actually there is enough metal to grind flats on it. I did this when I was experimenting with making 2 blade layer 91mm SAKs, and I used a hook as the backtool for the inner blade layer. I ground it squarish and it worked on the blade layer ok.
I like the idea of using a scissors backspring though, that would be easier. If you need any I have about 200 here that have no use. Anyone is welcome to as many as you want for just the cost of shipping.

-
@Pablo O'Brien said:
That upside down pic of the scissor spring is smurfing with my head.
;)
When I mentally imagine it the right way up, I begin to see what you mean.Thanks for answering my questions. :)
Truth is I am pretty new to SAK modding. I enjoy it so I try to encourage others and help if I can. Often I also learn something new while doing so.
-
Hi syph
But did it have snap like factory, or O.K kind?
Also what do you think of Zoidbergs idea of replacing the saw spring with a scissor spring? Seems like it only needs very little grinding on one end of the spring so the saw rests nicely in the closed position, and no grinding seems to be needed on the saw itself or the hook.
Would it work? :)Thanks for the help zoid and syph. :)
-
Ya it doenst look like the scissors spring would need much tweaking eh?


I used to be all organized and separate all my springs, but I gave up and now there is just a big bin in my shop of them. :D
-
Indeed.
You seem like the kind of guy who woulds know suppliers of parts.
Whats the best place to buy rivets, springs, etc? :)
I'm in Ireland. -
I think most hobby stores carry the brass bin stock. 2.2 mm is the hardest to find but it sounds oike jts pretty easy to find in the uk.
If you want some scissors backsprings let me know.
-
Theres a few hobby stores in Dublin. I'll check them. :)
Can you really spare the spring? I wouldn't want to take one off you unless you really did not need it. I'd pay the shipping off course. :) -
@Pablo O'Brien said:
Theres a few hobby stores in Dublin. I'll check them. :)
Can you really spare the spring? I wouldn't want to take one off you unless you really did not need it. I'd pay the shipping off course. :)Shipping is 10 for an internatinal light packet. I have hundreds of scissors backsprings i will never use. I can thlow a bunch of those and some hooks in a mailer for you just let me know.
-
Thanks for the offer syph, very reasonable. I think that I might have to get the hook somewhere else, since I want the one with a file on the spine, unless you have one?
I will put this project in the attic for awhile, since I want to get to know my Hiker better and to disassemble a beat-up SAK for practise. :)Lol, pfrsantos. Very true. The other backtools have no badge of their own, yes? :D
The hook is best used with ingenuity. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login