What Did You Use Your Multitool For Today?
-
.


-
I used my Spirit and Opinel today while putting together and installing 3 25m hosereels at work.
I used the Opi to cut the hose to length between the reel and the tap, then the Spirit to screw various bits together and then fix the reels to the wall.
I didn't take pics as I'm sure it wouldn't go down well with my residents

They can't even see the point of me carrying a Multitool or SAK around despite the miriad times I have fixed something for them with it. Oh well.
-
I used the scissors on my Hercules to cut extra nylon cord from the weed whacker.
-
My Schrade Tough Tool is on work duty as of now, so it probably saw the most use in a single day of any of my tools. Had to weed whack for 4 hours, with the wrong string so there was a lot of replacing done. Small driver pushed the broken ends out, pliers grabbed them.
Then had to demo two stair sets and forgot my tool bag so only had the Tough Tool and a size 13 boot, used the busted phillips to successfully take out about 50 screws, then a swift boot dealt with the nails.
Then I set up 4 swing sets using just that and a pair of Channel locks. Pretty interesting day for the poor old girl, but it worked quite well.
-
Used the Spirit remove and replace a chilled water valve actuator. It handled all the screws, connectors, bolts, and re-wiring without a support team. Was on a rooftop trying to beat a sand storm that was blowing in and didn't want to have to make a run to the van and back to get dedicated tools. He wasn't the right tool for every aspect of the job, but he was the one that got it done right and in time. Well played Vic.
Sent from my iPhone using Tapatalk
-
I hope you guys wear safety goggles whilst weed whacking... I know I always will from now on: http://www.stuff.co.nz/world/americas/68540142/nail-shoots-into-eye-after-weedwhacker-accident
-
Rebat helped with some plumbing chores today. Trimming PVC pipe, undoing a stuck nut, and cleaning out the old 90 degree joint with the reamer. Then we sawed through some old PVC pipe so it was small enough to throw away. Then the Rebar had to go to bed because it slipped while closing and gave me a blood blister.
-
Farmer to kill a few wires
-
Actually mrs. Tj used it but she used my crater c33t to cut some holes near the belt loops to loosen up my pants before a formal banquet last night. The pants are a little form fitting for a lack of better terms.
-
I used the Spirit X to uninstall a towel dispenser at the shop and reinstall a new one
-
I had to make an extension for a guitar cable this evening so I used the Spirit X knife and wire cutters to strip the wire and the pliers to crimp the jack to the wire.
-
I used the awl on my Tinker to open up a container of ground turkey for dinner last night.
-

Weekend project with my son. School woodwork project. ST Spirit doing much of work. S.T. Dupont keep him company...
-
Elective woodworking class, technical culture class (or what ever the hell it's called these days), some hybrid bridge building class?
-
Now drying...



After that finish touch...
Black permanent marker and JCB on top
-
I used my Hiker.
Task: Opening a tin with the can opener.
Preformance: 9/10, it takes practice to do this sort if thing nicely with <u>any</u> can opener.
-
I used the diamond file on my Wave to sharpen my SOG Trident.
-
Mrs. TJ used the scissors on my Hercules to cut some roses out of the garden.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




