New for 1992
-
That's a 4th generation Multi-Plier. Nice clean example, too!
(button head screws on sliding mechanism, round nut pivot screws, previous generation blunt nose plier head)
Late 90's, maybe? I wish Gerber would have stamped production dates like Leatherman does....
-
@neillcurrie said:
Found this old girl Monday. A little work with a toothbrush and dish soap, a little wire wool, and a shot of WD-40, and she looks almost like new. Very similar to the model I gifted to a friend several years ago.
Any ideas as to the production date and unofficial "series x, y, z" on this?You dirty, dirty, dirty boy...

-
Found this old girl Monday. A little work with a toothbrush and dish soap, a little wire wool, and a shot of WD-40, and she looks almost like new. Very similar to the model I gifted to a friend several years ago.
Any ideas as to the production date and unofficial "series x, y, z" on this?You dirty, dirty, dirty boy...

I wish I knew what you are so smuttily referring to :o
-
Found this old girl Monday. A little work with a toothbrush and dish soap, a little wire wool, and a shot of WD-40, and she looks almost like new. Very similar to the model I gifted to a friend several years ago.
Any ideas as to the production date and unofficial "series x, y, z" on this?You dirty, dirty, dirty boy...

I wish I knew what you are so smuttily referring to :o
Well, it's just my filthy mind. I was picturing an old girl being put through all that. A real girl...

-
Great one for sure will make it mine.
-
I just bought used Mr Pinchy, 2nd generation. It probably had not seen any lubrication since early 90's.
What size of hex driver should I get to unscrew it?

-
@jakobym said:
I just bought used Mr Pinchy, 2nd generation. It probably had not seen any lubrication since early 90's.
What size of hex driver should I get to unscrew it?

If needed use the hex driver that fits. Otherwise just apply the oil on the washers from the end and open / close the tools to work it in.
-
It's a weird American size, not metric. 2 sizes required, one for the tools, the other for the plier head mechanism.
-
@neillcurrie said:
It's a weird American size, not metric.That's why I'm asking. It's not easy thing to find American-size hex drivers right in the middle of Europe.
Cleaning and lubrication were the first things I did after opening the package. It looks like the only tool used, was a plain edge blade. On the other tools BO looks untouched.
-
Okay, one more question: is it normal for Mr Pinchy's wire cutters to grind on each other?
Otherwise, how can I stop that? -
@jakobym said:
Okay, one more question: is it normal for Mr Pinchy's wire cutters to grind on each other?
Otherwise, how can I stop that?What do you mean exactly? They have to touch when closing to be functional as a wire cutter. That is unless it is a anvil style wire cutter which the Mr. Pinchy is not. Is it causing the pliers to be hard to open?
-
I know, I know. I just thought that the friction is too strong, that the ends of the pliers don't meet each other (or maybe I'm too used to Leatherman's needlenose pliers). The gap is not large, maybe not even half a milimeter. It just is.
-
@jakobym said:
Okay, one more question: is it normal for Mr Pinchy's wire cutters to grind on each other?
Otherwise, how can I stop that?I'm not completely certain, but I think on that model the plier head tension is adjustable with a pin spanner.
You could always file or dremel the cutters to get the clearance.
-
@zoidberg said:
I'm not completely certain, but I think on that model the plier head tension is adjustable with a pin spanner.It is on the one in the photo, so you could pull it apart, clean and lubricate the pivot, and clean up burrs (if any) on the inside (cutting edge) of the wire cutters while you've got it apart.
-
I'm not completely certain, but I think on that model the plier head tension is adjustable with a pin spanner.
It is on the one in the photo, so you could pull it apart, clean and lubricate the pivot, and clean up burrs (if any) on the inside (cutting edge) of the wire cutters while you've got it apart.
What he said.

-
Hi I am new to the posting and a few Gerber questions
In a couple of posts reference is made to early Gerber generations (1st-4th etc)
are there articles and information on the site giving details and history( differences etc)
Thanks -
@survivaledge said:
Hi I am new to the posting and a few Gerber questions
In a couple of posts reference is made to early Gerber generations (1st-4th etc)
are there articles and information on the site giving details and history( differences etc)
ThanksFirstly welcome to MTo.

Lots of useful info here, try out the Search button up the top left of the screen (near the HOME button), and if that doesn't get you what you want, just ask. There are quite a few Gerber enthusiasts on this forum (as well as other brands).
Try these as a primer to get you going on the early "Mr Pinchies" (Multi-Pliers):
/topic/2792
/post/928733
The MPT was another early multitool made by Gerber.
http://wiki.multitool.org/tiki-index.php?page=MPT -
Welcome to the forum survivaledge.

-
@Chako said:
I happen to have one with the scissors. It is an odd one though, as it seems to have been half thought out, with the nail nicks all messed up etc. It also has "First Production Run" stamped on the handles. It is the only one that I have with scissors though.Here is a group shot of all the Gerbers that I have with the old style locking mechanism. Note that a Carolina and Winchester tools are included as they both have the same locking style. Not sure if Gerber made them or just licensed it out, but I have a suspicion that Gerber made them and just stamped their customer's name on the tools. I can be wrong though.

Here, I played with the lighting to highlight the wording. Not that great of a photograph though.

I quickly moved to a black background due to the results from above to show the details on the back of the handles.
Here we have the First Edition Run.

And the later model (Second in the first group shot).

I think I have the second one can u help me out
Sent from my SM-G900W8 using Tapatalk
-
@Chako said:
I happen to have one with the scissors. It is an odd one though, as it seems to have been half thought out, with the nail nicks all messed up etc. It also has "First Production Run" stamped on the handles. It is the only one that I have with scissors though.Here is a group shot of all the Gerbers that I have with the old style locking mechanism. Note that a Carolina and Winchester tools are included as they both have the same locking style. Not sure if Gerber made them or just licensed it out, but I have a suspicion that Gerber made them and just stamped their customer's name on the tools. I can be wrong though.

Here, I played with the lighting to highlight the wording. Not that great of a photograph though.

I quickly moved to a black background due to the results from above to show the details on the back of the handles.
Here we have the First Edition Run.

And the later model (Second in the first group shot).


Sent from my SM-G900W8 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login