A little fire prep
-
So, back to the prep, if not the actual fire.

One habit that some folks have that always makes me cringe a little is holding a piece of wood directly under the cutting edge while "setting" the axe. OK, if your axe is blunt and it slips then you'll likely be fine, but I keep my axes sharp. If I'm going to do it this way then I keep my fingers well down the wood and away from the axe.
I'd ask why you need to be holding the wood at all. It's to stop the piece from falling over, right? So why not lay the piece down and attack it this way? If your aim is good then there is no need to hold the wood at all. If your aim isn't so good then hold the axe to the wood as shown, hold the wood and axe together, lift and then bring them down together. Fingers are well out of the way and, hopefully still attached to your hand.


-
Great tip Gareth!

-
Cheers buddy.

One more tip for today; feather sticks. No need for firelighters, petrol or gels etc. What you need is a great feather stick. 8) Sadly, I'm not great at making these, so a mediocre feather stick will have to do. ;)
Lots of tutorials on making feather sticks (though ironically the picture on Wikipedia is a terrible example), but here's a quick video from the man himself.
Ray Mears Demonstrations - Feather Sticks

-
Gareth, great read and really enjoying this thread!

I am an axe newbie and lately had been researching/practicing on various skills as much as I can. You probably know this...but just adding on top of what you said about chopping semi-narrow wood vertically, one trick I have learnt was to have the spare hand holding another piece of wood horizontally, and use the tip of that wood to hold the standing piece steady. So my spare hand is further away from axe falling path.
-
Fantastic thread, Gareth

@comis said:
Gareth, great read and really enjoying this thread!
I am an axe newbie and lately had been researching/practicing on various skills as much as I can. You probably know this...but just adding on top of what you said about chopping semi-narrow wood vertically, one trick I have learnt was to have the spare hand holding another piece of wood horizontally, and use the tip of that wood to hold the standing piece steady. So my spare hand is further away from axe falling path.
Comis, the issue there is that if your axe doesn't penetrate properly, the whole thing can topple, potentially damaging the axe, you, or something else. Horizontally, with the wood already touching the axe blade, and both brought down together as one, is FAR safer

-
Cheers gents. Would you believe I've still not had a dry day in which to enjoy a little fire?

Comis: as Al says that is indeed a valid technique, but I do find it a lot less stable than laying the piece flat. It will definitely work, but personally I prefer the way I do it. Might give your way a go again though. :)
-
This is my kind of thread! Nice work so far.
Nate
That's us mobile -
@Gareth said:
One habit that some folks have that always makes me cringe a little is holding a piece of wood directly under the cutting edge while "setting" the axe. OK, if your axe is blunt and it slips then you'll likely be fine, but I keep my axes sharp. If I'm going to do it this way then I keep my fingers well down the wood and away from the axe.That’s just one of my many bad habits

Nice post Gareth

-
Cheers Tony.
P.S......I WANT IT TO STOP RAINING EVERY TIME I HAVE SOME FREE TIME TO LIGHT A SMURFING FIRE!!!!

-
One habit that some folks have that always makes me cringe a little is holding a piece of wood directly under the cutting edge while "setting" the axe. OK, if your axe is blunt and it slips then you'll likely be fine, but I keep my axes sharp. If I'm going to do it this way then I keep my fingers well down the wood and away from the axe.
That’s just one of my many bad habits

Nice post Gareth

:-\ I wasn’t sure if I was going to post this or not

Gareth can say ‘I told you so’ if he likes
A week or so ago I was dismantling something in the garage with an axe when...
Went quite deep :o :o wasn’t going to say :-[ :-[ healed up nicely :)<a href="http://s112.photobucket.com/user/sparky_415/media/2015/DSC02455 f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2015/DSC02455 f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Looks like your healing up nicely Tony!
-
Gareth, me thinks you've sent your weaather to Kansas. Been cool and wet forever it would seem. :D
-
Ouch Tony. :( Are you left handed mate? I'd forgotten.
Sorry about sending the weather over David. It's not actually rained every single day since I started this thread, but opportunity and good weather haven't managed to coincide yet. Now my wife wants to steal the fire pit and all the wood for an event at her church tomorrow, so I'll have to start over. ::)
-
kept a dry plaster on it and wore clean gloves at work
It healed very nicely/quicklyYep mostly a lefty :)
On the up side David, the weather is great here :D >:D
-
OK, I admit it, I'd actually forgotten about this thread. :-[ I have had at least one fire since I last posted here, but I think I forgot to take any pictures.
So, while trying out a cutlery drainer as a little hobo fire container, I though to take some. -
The basics:
As I said before, I don't normally feel the need for any kind of fire lighter as a good feather stick is normally enough. Here you can see the fire container, feather sticks and kindling.
Also, BEFORE you light ANY fire you should have some way of putting it out. :) In this case I've got my garden hose to hand, but clods of wet moss, sand or similar will do in the wild. A 500ml bottle of water doesn't have a great amount of effect on a camp fire that is getting out of control.


-
One feather stick, a lighter and some finely split kindling and we're off. :)
Let the fire take the smaller stuff and go for bigger pieces. With a camp fire you don't want to go too big too soon. All you'll end up doing is smothering the fire.
A rule of thumb I go with is: wait until the flames are established well enough that they are well above the height of the last layer of wood you added. Don't wait too long as then the flames can die back and are less likely to catch hold of the added wood.
As you can see I had no problems with getting a good flame going.


-
Ikea


-
Actually this one came from Home Bargains. At a whopping 99p I thought it was worth a punt. ;)
-
Bargain

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login