Rebar vs. Swisstool.
-
I'd go Swisstool every time as I used and abused mine for years with no complaint :)
Sent from the astropathic choir.
-
Are you thinking Swisstool Spirit or the regular Swisstool? Because the size-difference between the Swisstool and Rebar is quite big, the Swisstool being in the 4,5" class.
True... if you mean SwissTool, go with the SwissTool, but if you mean the Spirit, go with the Spirit :D
I feel the same! :D
The rebar is good but not in the same class to me as the swisstools. The full size swisstool is a heavy one to carry though!
Ofcoarse the Rebar is not, it is a medium tool compared to a large tool like a Swisstool.
Nate
-
I like the swisstool for its outside accessible tools, but they are a bit hard and awkward to deploy and I would like to see the pliers open wider. The wire cutters are fantastic. As for the rebar it's like a modern version of the pst, enough said.
-
I have edc both the rebar and that Swisstool x (not spirit) Swisstool wins.
Rebar was flimsy. Knife blades where way too thin.
Saw broke because of the hole for opening.
I have never had a tool that was so bad designed. Not speaking for quality but the design. They should not have the saw and file come to a blunt tip. Because that they are weak and have a small surface.I really liked the idea behind the rebar but the design of the tools ruined it for me.
Swisstool x is an edc monster, you can not have a better edc tool box with ya.
-
Kind of an unfair comparison. It's like comparing an F-150 Platinum to a Toyota Tacoma...... not even in the same ballpark.
Sent from my iPad using Tapatalk
-
I had both the Swisstool and the Rebar. I sold the Swisstool, so for me the Rebar won out.
-
I agree with the majority here, if you are undecided weight is a huge factor. I had the st300 and now I have a rebar. Almost the same loadout but the rebar is much lighter while maintaining capabilities. If you don't care for the weight and you're looking for a workhorse then the swisstool may be the way to go especially with outside accessible tools. Weight and carry method will probably be the deal breakers either way. Good luck

-
Kind of an unfair comparison. It's like comparing an F-150 Platinum to a Toyota Tacoma...... not even in the same ballpark.
Sent from my iPad using Tapatalk
wait... Which one is which?

My point was just that it seemed odd to make a comparison of two dissimilar tools, but clearly the OP felt these 2 were worth a comparison as they met his preference standards.
I would think if you're not a heavy user then the Rebar would be adequate for performance and its lighter weight would be a bonus. If you're a heavy user/tradesman type then I'd think the SwissTool would be a better option.Sent from my iPad using Tapatalk
-
I had both the Swisstool and the Rebar. I sold the Swisstool, so for me the Rebar won out.
I had both swisstool and Spirit, didn't like them and got rid of them quickly.
It would be a boring place if we all liked the same things. I'm sure they went on to fulfilling lives where they were loved and respected[emoji6]
Sent from my iPad using Tapatalk
-
@ToolJoe said:
I think I have it narrowed down to my choice for my next mt: Rebar vs. Swisstool. Which one should I go with? Go!I'm wondering if you've considered the MP600? I had recently (a few months back) gotten a BO Rebar, but was unimpressed with it and gifted it to nephew. Having an urge for BO I ended up with a MP600. My expectations were low, based on a lot of negative Gerber sentiment on this site, so I was very surprised to find that I really do like the tool. It needs a few mods to be a bit more functional for me, but given its price point and Made in USA status it's a pleasant surprise.
Sent from my iPad using Tapatalk
-
I carry a Rebar but have
over pics of the Swiss Tool - the one with the Vic scissors. I'd narrow it down by desired size. The Swiss Tool is larger/heavier than the Rebar. -
I EDC a rebar, and I use it very hard. My only complaint is the file sucks. It's too aggressive and really just snags the edge of whatever metal you are trying to file with it. Pretty much any other file is better (Been a Machinist for years, I have a million files). Other than that, the Rebar is a fantastic hard use tool. It's easily in the same class as the Swisstools. For some reason the Swisstools have this cult following that would have one believe they are God's gift to the tool world, but honestly they are just good tools, nothing more. I actually don't care for the phillips on any of them, I've rounded way too many off them off with normal use. The flat drivers shouldn't be polished either, for me they tend to slip out of slots way too easily. Other than that, I love the Swisstools and I do plan on getting another Spirit X one day, but I doubt it will remove any of my Leatherman's from my belt.
I sincerely wish Leatherman would adopt the Chisel into their line for once. That's a hell of a tool to have in a MT!Say what you want about rusty ol' Leatherman, but I have never seen anyone in person carrying a Swisstool. I'm not bashing them, but tradesmen here where I live don't even know they exist. There are 18 Building Maintenance Engineers in my department. 7 carry Leatherman(myself included), 2 carry a SOG, one carries a gerber, one carries a Winchester cheapo, one carries a kershaw select fire, the rest carry nothing but a pair of channelocks and a klein ten in one.
Let the beatings begin, I know they're coming!! :ahhh :ahhh :ahhh
-
@Mercury said:
I EDC a rebar, and I use it very hard. My only complaint is the file sucks. It's too aggressive and really just snags the edge of whatever metal you are trying to file with it. Pretty much any other file is better (Been a Machinist for years, I have a million files). Other than that, the Rebar is a fantastic hard use tool. It's easily in the same class as the Swisstools. For some reason the Swisstools have this cult following that would have one believe they are God's gift to the tool world, but honestly they are just good tools, nothing more. I actually don't care for the phillips on any of them, I've rounded way too many off them off with normal use. The flat drivers shouldn't be polished either, for me they tend to slip out of slots way too easily. Other than that, I love the Swisstools and I do plan on getting another Spirit X one day, but I doubt it will remove any of my Leatherman's from my belt.
I sincerely wish Leatherman would adopt the Chisel into their line for once. That's a hell of a tool to have in a MT!Say what you want about rusty ol' Leatherman, but I have never seen anyone in person carrying a Swisstool. I'm not bashing them, but tradesmen here where I live don't even know they exist. There are 18 Building Maintenance Engineers in my department. 7 carry Leatherman(myself included), 2 carry a SOG, one carries a gerber, one carries a Winchester cheapo, one carries a kershaw select fire, the rest carry nothing but a pair of channelocks and a klein ten in one.
Let the beatings begin, I know they're coming!! :ahhh :ahhh :ahhh
Probably cuz you live in the US.
Victorinox is the most sold in europe. Atleast ten times more than lm, maybe fifteen or twenty.For me both the rebar and the swisstool x are decent tools.
They both do the job.
But the Swisstool is just a bit better, and that is the reason why i edc it.
They fixed the things that annoyed me on the rebar= winner -
I EDC a rebar, and I use it very hard. My only complaint is the file sucks. It's too aggressive and really just snags the edge of whatever metal you are trying to file with it. Pretty much any other file is better (Been a Machinist for years, I have a million files). Other than that, the Rebar is a fantastic hard use tool. It's easily in the same class as the Swisstools. For some reason the Swisstools have this cult following that would have one believe they are God's gift to the tool world, but honestly they are just good tools, nothing more. I actually don't care for the phillips on any of them, I've rounded way too many off them off with normal use. The flat drivers shouldn't be polished either, for me they tend to slip out of slots way too easily. Other than that, I love the Swisstools and I do plan on getting another Spirit X one day, but I doubt it will remove any of my Leatherman's from my belt.
I sincerely wish Leatherman would adopt the Chisel into their line for once. That's a hell of a tool to have in a MT!Say what you want about rusty ol' Leatherman, but I have never seen anyone in person carrying a Swisstool. I'm not bashing them, but tradesmen here where I live don't even know they exist. There are 18 Building Maintenance Engineers in my department. 7 carry Leatherman(myself included), 2 carry a SOG, one carries a gerber, one carries a Winchester cheapo, one carries a kershaw select fire, the rest carry nothing but a pair of channelocks and a klein ten in one.
Let the beatings begin, I know they're coming!! :ahhh :ahhh :ahhh
Probably cuz you live in the US.
Victorinox is the most sold in europe. Atleast ten times more than lm, maybe fifteen or twenty.For me both the rebar and the swisstool x are decent tools.
They both do the job.
But the Swisstool is just a bit better, and that is the reason why i edc it.
They fixed the things that annoyed me on the rebar= winnerThat's a very accurate and fair reply.

-
@Mercury said:
I EDC a rebar, and I use it very hard. My only complaint is the file sucks. It's too aggressive and really just snags the edge of whatever metal you are trying to file with it. Pretty much any other file is better (Been a Machinist for years, I have a million files). Other than that, the Rebar is a fantastic hard use tool. It's easily in the same class as the Swisstools. For some reason the Swisstools have this cult following that would have one believe they are God's gift to the tool world, but honestly they are just good tools, nothing more. I actually don't care for the phillips on any of them, I've rounded way too many off them off with normal use. The flat drivers shouldn't be polished either, for me they tend to slip out of slots way too easily. Other than that, I love the Swisstools and I do plan on getting another Spirit X one day, but I doubt it will remove any of my Leatherman's from my belt.
I sincerely wish Leatherman would adopt the Chisel into their line for once. That's a hell of a tool to have in a MT!Say what you want about rusty ol' Leatherman, but I have never seen anyone in person carrying a Swisstool. I'm not bashing them, but tradesmen here where I live don't even know they exist. There are 18 Building Maintenance Engineers in my department. 7 carry Leatherman(myself included), 2 carry a SOG, one carries a gerber, one carries a Winchester cheapo, one carries a kershaw select fire, the rest carry nothing but a pair of channelocks and a klein ten in one.
Let the beatings begin, I know they're coming!! :ahhh :ahhh :ahhh
I'd say that's pretty a pretty accurate assessment in the fact that most (US at least) tradesman likely carry a Leatherman over a Vic. However, price point is far and away the determining factor in choice. Most guys are happy getting the lowest cost US made tool they can and don't over analyze choice. Most guys that carry around a multitool, in my experience, when you ask them about it they don't even know what model it is.

-
I EDC a rebar, and I use it very hard. My only complaint is the file sucks. It's too aggressive and really just snags the edge of whatever metal you are trying to file with it. Pretty much any other file is better (Been a Machinist for years, I have a million files). Other than that, the Rebar is a fantastic hard use tool. It's easily in the same class as the Swisstools. For some reason the Swisstools have this cult following that would have one believe they are God's gift to the tool world, but honestly they are just good tools, nothing more. I actually don't care for the phillips on any of them, I've rounded way too many off them off with normal use. The flat drivers shouldn't be polished either, for me they tend to slip out of slots way too easily. Other than that, I love the Swisstools and I do plan on getting another Spirit X one day, but I doubt it will remove any of my Leatherman's from my belt.
I sincerely wish Leatherman would adopt the Chisel into their line for once. That's a hell of a tool to have in a MT!Say what you want about rusty ol' Leatherman, but I have never seen anyone in person carrying a Swisstool. I'm not bashing them, but tradesmen here where I live don't even know they exist. There are 18 Building Maintenance Engineers in my department. 7 carry Leatherman(myself included), 2 carry a SOG, one carries a gerber, one carries a Winchester cheapo, one carries a kershaw select fire, the rest carry nothing but a pair of channelocks and a klein ten in one.
Let the beatings begin, I know they're coming!! :ahhh :ahhh :ahhh
I'd say that's pretty a pretty accurate assessment in the fact that most (US at least) tradesman likely carry a Leatherman over a Vic. However, price point is far and away the determining factor in choice. Most guys are happy getting the lowest cost US made tool they can and don't over analyze choice. Most guys that carry around a multitool, in my experience, when you ask them about it they don't even know what model it is.

True, they walk in a store, see an MT and think hey that could come in handy sometimes.
I the states probably most of the times there are Leatherman tools in the store.
Europa most of the time Victorinox.That will be a huge factor in the edc carry of the average man, they wont make and account on mto and have disscusions about it. just buy it, some times get it as gifts from people who also have no knowledge about mt's.
-
Here in Belgium most people refer to any plier-based tool they see as being a Leatherman, even my Spirit or Swisstool ...
Walk into a store, and the chance that you're going to find a Spirit or Swisstool is about 5%, while you have a 95% chance of finding a Leatherman there. But when you're looking for a pocket knife, it's the other way around. Most people here don't even use the word pocketknife (zakmes in dutch) instead they will refer to it as being a Swiss Army Knife (Zwitsers zakmes in dutch), even my Leatherman Crater or Expanse ... ::)
Just to show that most people don't know anything about multitools, and if they own one, it's just because they found it in a store, someone gave it to them as a gift, or someone they know had one and told them how awesome it was. Most of the time they will own one tool which they will use twice a year, and they don't even know there are other tools out there ...
In my humble opinion, both Leatherman and Victorinox have pros and cons, and I will carry either of them, depending on what I'm going to need them for. Most of the time it will come down to this: when I'm going to do some work around the house, I will pick a Leatherman (mostly my ST300), I'm going to use the phillips and the wire cutters (both superior on the Leatherman tools), and the chance of my tool getting wet is close to zero. When I go out camping/hiking I will carry my Spirit or my Swisstool, because I'll probably don't need the phillips and wire cutters that much (and when I do, the ones on the Swisstool or Spirit will also do the job), I will however need a pair of scissors, a good can opener, etc. And the fact that I don't need to worry about my multitool when I'm getting soaked in the rain all day is also nice.
And some times I will go crazy and carry a Rebar or ST300 along with a Vic Explorer or Swisschamp ...

I do think the Vic tools have better fit and finish, and since Leatherman tools are more expensive here than Vic tools, I do expect them to be on par with the Vic tools when it comes to fit and finish. For example, if I could buy a Rebar over here for the same price you guys in the States buy yours, I would not mind the small fit and finish "problems" on it. But I guess you guys would not like it either if you payed 145 Euro (about $160) for a OHT only to find you can't close the saw without having to push it to the inside while closing it.
Long story short, I like both brands, and which one is best for you all depends on what you're going to use it for ;).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login