Sharpening, discuss.
-
My dad is a chef and taught me from a very early age to sharpen with a steel. I still use the one he gave me about 30 years ago, and it was old then.
I also use a Fallkniven DC4 and a ceramic rod for touch ups, and I have an oil stone I used for my chisels and planes when I carpented for a living, but I rarely use it now.
-
Sharpmaker user here. There are a lot of good ways to sharpen. I'm going to keep this short as I'm on the iPad. When people use pull through sharpeners I want to rip off their arms and beat them with them. Not to mention all their knives should be confiscated.
-
@captain spaulding said:
Sharpmaker user here. There are a lot of good ways to sharpen. I'm going to keep this short as I'm on the iPad. When people use pull through sharpeners I want to rip off their arms and beat them with them. Not to mention all their knives should be confiscated.Don't beat around the bush here Cap - say what you think!

-
Started with very cheap stones that didn't do much. I guess they might be barely ok for scythes and lawn mower blades but outside of that not really.
Then I switched to the Sharpmaker and I have to say the system is great. But my use of it these days is unconventional and quite frankly I would be served in the same manner by the Spyderco Profile set.
I've entirely switched to freehand sharpening and my technique resembles that of the infamous Cliff Stamp, i.e. holding the stone in hand. Gives me good results in a short amount of time and I don't really care about scratches so that's a non issue. This is also where the Spyderco ceramic comes in and is used more as a filed or one of those diamond rod sharpeners than in the stand.
Next steps would be getting a spyderco UF stone, 6 to 8k stone and some of those stropping compounds. The High grit stones are mostly for straight razors and some experiments. -
I very rarely need a stone,so therefore rarely use one.A good quality steel is all that's necessary when the blade has been well maintained.If the blade has been abused or accidently damaged I resort to a stone.
I did however employ it when I decided that I couldn't live with the blades on the new Wenger 130's.So I created a choil and used my stone to bring the back edge of the blade level with the rest of the blade.
</post/1014815>
-
Whet stones, Lansky, steel, pull though rarely for a filet knife and leather for stropping.
Nate
That's us mobile -
@styx said:
Started with very cheap stones that didn't do much. I guess they might be barely ok for scythes and lawn mower blades but outside of that not really.Then I switched to the Sharpmaker and I have to say the system is great. But my use of it these days is unconventional and quite frankly I would be served in the same manner by the Spyderco Profile set.
I've entirely switched to freehand sharpening and my technique resembles that of the infamous Cliff Stamp, i.e. holding the stone in hand. Gives me good results in a short amount of time and I don't really care about scratches so that's a non issue. This is also where the Spyderco ceramic comes in and is used more as a filed or one of those diamond rod sharpeners than in the stand.
Next steps would be getting a spyderco UF stone, 6 to 8k stone and some of those stropping compounds. The High grit stones are mostly for straight razors and some experiments.This, with diamond stones, Fallkniven DC4's, DMT Doufolds and diamond rods. I will occasionally brace the tip of the Duofolds/Rods on the edge of a table on bad RA days.
-
I've been using the Lansky and like it. Making sure the set each knife up the same as the last time is important. I've gotten good results and would like to get a few more grit to round out the system. I can see myself getting "into" sharpening like some I see on the interwebs.
What I do from day to day is strop. My Vics get stropped weekly with green compound which I find keeps the edges in great shape. I will use ceramic rods if I need a bit more than "work" on the edge. Once I've put on the correct edge angle for me stopping or ceramic has been all I've really done.
-
Wet stone, 400-1500 grit wet dry paper and strop. I would like to get a sharpmaker though.
-
Sorry Cap...
Pull through sharpener to start, if the knife is particularly dull.
Ceramic rods to finish. It's just a plastic base with two ceramic rods in a V shape. Between the two, I get the results I want.
Total cost of the setup is maybe $12.
I have neither the time nor money to smurf around with more expensive solutions to the task. If a knife cuts thin receipt paper easily, it's is more than sharp enough for any task I might need to do, and the method I've listed above gets knifes to hair popping sharp (much sharper than I ever need).
Feel free to hate on me as a talentless noob. It ain't even a thing.
-
Alright Lynn I'm coming over to rip your arms off and beat you with them. How does 7:30 sound? We can have dinner after. :D
-
I use a Spyderco double ceramic pocket stone.
Sent from a device made from star dust using tapatalk
-
This shows that one doesn't need to spend a whole lot
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@captain spaulding said:
When people use pull through sharpeners I want to rip off their arms and beat them with them. Not to mention all their knives should be confiscated.It depends on the knife and it´s dedicated work if i use the pull through sharpener, but you are invited to try that arm thing.

-
@captain spaulding said:
When people use pull through sharpeners I want to rip off their arms and beat them with them. Not to mention all their knives should be confiscated.
It depends on the knife and it´s dedicated work if i use the pull through sharpener, but you are invited to try that arm thing.

I can't see Lynn standing idly by while the Cap tries to dismember her. Let's see how he salutes after that!
-
I've used a Lansky for years, it works great for me. There's a bit of a learning curve to it, but once I got my technique down I get shaving-sharp results.

-
It really boils down how much steel you are willing to throw away to get an edge and the quality you need for that edge. For a knife that needs a new edge, I simply use a sharpie to mark the edge to easier see where I actually remove material. For the actual sharpening, I use a Spyderco Sharpmaker. That said, I sometimes use a pull-through (ceramic for touch-up, carbide for reshaping); you just need to think about what you're doing. Seems the cap has his work cut out for him here. :D
I have seen knives ruined with pull-through sharpeners, an activity for which they are perfectly suited, but it's not like the edge spontaneously disintegrates just because the ceramic rods which do the sharpening is placed closer together than on the Sharpmaker... ;)
I'm clumsy, lazy and impatient, so I take all the help I can get when I sharpen my knives. The diamond rods to reshape new blades with ridiculously obtuse edge angle was one of my better buys. Trying to reshape an edge with one of the ceramic hones on a Sharpmaker is an exercise in futility. (Getting the super-fine rods to polish edges wasn't too dumb either.)
-
@captain spaulding said:
When people use pull through sharpeners I want to rip off their arms and beat them with them. Not to mention all their knives should be confiscated.
It depends on the knife and it´s dedicated work if i use the pull through sharpener, but you are invited to try that arm thing.

I can't see Lynn standing idly by while the Cap tries to dismember her. Let's see how he salutes after that!
Good point Maggy, Lynn is a better shot then most of us.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login