Silvertech scales
-
Same. Same process as any other scales.
I've swapped 58's and 91's. -
Swapped scales with a black-handled Super Tinker, a model normally not available with silvertech scales (I'm a modder! :D ). A definite improvement in looks.
-
Even if the bushing holes get damaged, dab a little epoxy in each hole using a toothpick, apply pressure till set, and the scales stay on just fine.
-
Using glue or epoxy can get "damaged" scales back on, but if you ever want to remove them again your screwed for the most part. You can also (while rare) gum up the tools on the knife if using glue to attach scales.
-
I got some pen scales for 58mm off ebay labeled as "new takeoffs". They seamed to snap on well with no glue and I've had no issues. I imagine if you take them on and off too many times they will loose there ability to stick.
-
I use Goop brand Glue it stays flexible but holds well.
-
Just be carefull when removing the scales from thier corrent knife that you don't scratch the silver coating/paint on the backside of the scales. I have scrateched this coating wile replacing twizers.
-
@captain spaulding said:
Using glue or epoxy can get "damaged" scales back on, but if you ever want to remove them again your screwed for the most part. You can also (while rare) gum up the tools on the knife if using glue to attach scales.Providing you use epoxy sparingly you're fine. That's why I suggested the use of a toothpick, just a little does it.
I have never had a problem with gummed up tools, nor with removing the scales again after epoxying. -
I still think that new factory replacements are the best way to go. Reused scales are never right in my experience. I have an extra set from Tim (if he's out of them) that I would happily send you CS. If your heart is set on silvertech, you might as well have fresh new stuff. PM me if you want them. :)
-
@twiliter said:
I still think that new factory replacements are the best way to go. Reused scales are never right in my experience. I have an extra set from Tim (if he's out of them) that I would happily send you CS. If your heart is set on silvertech, you might as well have fresh new stuff. PM me if you want them. :)Appreciate the offer, but already did the switch and it seems to be working ok. Was a rather extemporaneous situation; got a Spartan with the silvertech scales, but not a fan of the Spartan (no scissors), and had an old Super Tinker user with black scales I didn't particularly care for, so did a swap.

-
just do it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login