freehand
-
Unlike Al I rather like the Flick. :D Never tried the Freehand, but it looks to be one chunky tool.
-
-

Here is my copy along with a Flik and MP600 for size comparison.

The Freehand is a massive piece of steel with some weight behind it. However, it is let down by those very small secondary folding tools. To counter that, the main tools are of a good size.

If you want to try something different, then go right ahead, The Freehand is not a tool many carry. I strongly suspect if is due to its heavy weight, and possibly by those small if functional secondary tools. The main tools are of a good size not often seen in a multi-tool. Some folks could never like the closing mechanism on both the Flik and the Freehand. It is somewhat complicated even though none of mine have failed or jammed in use. I EDCed the Flik for a few months when I first got it out of curiosity. It did the job very well...and the Freehand should do an equally good job...provided you can get past the weight and the size of it.
-
There's a rumor they are coming out with another even smaller than the FLIK. It's called the booger. Yep the Gerber booger.
-
Here is my copy along with a Flik and MP600 for size comparison.

The Freehand is a massive piece of steel with some weight behind it. However, it is let down by those very small secondary folding tools. To counter that, the main tools are of a good size.

If you want to try something different, then go right ahead, The Freehand is not a tool many carry. I strongly suspect if is due to its heavy weight, and possibly by those small if functional secondary tools. The main tools are of a good size not often seen in a multi-tool. Some folks could never like the closing mechanism on both the Flik and the Freehand. It is somewhat complicated even though none of mine have failed or jammed in use. I EDCed the Flik for a few months when I first got it out of curiosity. It did the job very well...and the Freehand should do an equally good job...provided you can get past the weight and the size of it.
Those small bits remind me of the small bits on Michelangelo's David.
-
The size of the Freehand definitely does not make them look any bigger, that is for sure. :D
-
I really like my Flik. I allways liked it size, but now that i see size of Freehand, i think i want one.
I do not care about size of those smaller tools. They get the job done. Multitool for me is not the first tool to go to. And i use them a lot these days.
-
@Crow said:
I really like my Flik. I allways liked it size, but now that i see size of Freehand, i think i want one.I do not care about size of those smaller tools. They get the job done. Multitool for me is not the first tool to go to. And i use them a lot these days.
This is the summation of my life.
:-[
-
If you want massive Needlenose pliers and mainly need what is offered as outside opening tools and only use the drivers in a pinch, the Freehand will work well, if your hands are big enough. I found out I use a Phillips too regularly and my hands should be a bit bigger to use it comfortably.
I´d say it´s a good tool if the tool selection works for you.
-
I just got a BO Freehand. Since everyone says it's big I decided to compare it to my Leatherman MUT.
closed Freehand compared to MUT

open Freehand compared to MUT
It was way quicker and easier to open the Freehand pliers than any Leatherman and unlike the MP600 all the tools are on the outside and most are one hand accessible.

Freehand in its Berry-Compliant (whatever that means) sheath, MUT in its molle sheath.

Berry sheath is versatile, it has removable vertical carry loop which then affords horizontal carry.
It doesn't have an extra pocket for bit kit (but is one even available for Freehand?).

At first I was disappointed in this tool with ruler and flathead screw driver tip but upon closer examination it has maybe the best pry bar in the business. Of course Gerber could have done better and made the flats files and the edges saws.

blades out

blades out+

tools on parade

As the Leatherman Surge is to the Wave, the Gerber Freehand is to the Diesel. I think of it as an über Diesel.
-
@buck said:
I just got a BO Freehand. Since everyone says it's big I decided to compare it to my Leatherman MUT.closed Freehand compared to MUT

open Freehand compared to MUT
It was way quicker and easier to open the Freehand pliers than any Leatherman and unlike the MP600 all the tools are on the outside and most are one hand accessible.

Freehand in its Berry-Compliant (whatever that means) sheath, MUT in its molle sheath.

Berry sheath is versatile, it has removable vertical carry loop which then affords horizontal carry.
It doesn't have an extra pocket for bit kit (but is one even available for Freehand?).

At first I was disappointed in this tool with ruler and flathead screw driver tip but upon closer examination it has maybe the best pry bar in the business. Of course Gerber could have done better and made the flats files and the edges saws.

blades out

blades out+

tools on parade

As the Leatherman Surge is to the Wave, the Gerber Freehand is to the Diesel. I think of it as an über Diesel.
Very good comparasing pics.

The blade look massive. Like many other here I have a Flik. And i like it. The opening system have never failed once it works like a clock and like other flickies is quite fun to play with and anoy other around you. >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login