Sharpening, discuss.
-
@Lynn LeFey said:
Have many folks here tried stropping on very fine sandpaper? Like 2000 grit?I ask because I don't have a leather or canvas strop, and i DO have very high grit sandpaper, and thought I might give it a try.
Yes, Ive used some 1500 grit with good results. I've also used 400 grit to sharpen first then the 1500 to stop and then onto a leather strop.
-
I've not tried it however I have used various grits up to 2000 to sharpen my hatchets with great results.
https://www.youtube.com/watch?v=UOMzx2bJpHg -
When I use wet and dry sandpaper to sharpen knifes I wet a price of glass and put the sand paper on it. The water holds sandpaper in place and the glass makes a good base to sharpen on.
Sent from my iPhone using Tapatalk
-
I own and use both a lansky 5 stones clamp system and a sharpmaker. I like them both and get satisfying results with both, but i overall prefer the sharpmaker for it is quicker to set up and because i use a lot of combo blades (i recall not popular around here!) and with the SM you can do both portions together even without changing rod! By the way... I found out that one material that drives blades dull in no time is heavy rubber(+ 1 cm)! Knives become useless in a few cuts... [emoji44]
-
@Aloha007 said:
I've not tried it however I have used various grits up to 2000 to sharpen my hatchets with great results.
https://www.youtube.com/watch?v=UOMzx2bJpHgNice little trick that I will definitely give a try.
-
Did the cardboard strop on my SRM 710 this morning - polished the edge nicely.
Have also just ordered a 4-stone Lansky turnbox to see if that's less hassle than the clamp-on set I've got. -
I'd like to practice my freehand sharpening. Currently I've got a combination oil stone that's been abused and is no longer flat. Would like something not too expensive to start with for sharpening SAKs and other smaller blades, occasionally kitchen knives. Been looking at combination 1000/6000 grit Japanese waterstones and the Fallkniven DC4. Any pointers as to which direction to go?
-
@hiraethus said:
I'd like to practice my freehand sharpening. Currently I've got a combination oil stone that's been abused and is no longer flat. Would like something not too expensive to start with for sharpening SAKs and other smaller blades, occasionally kitchen knives. Been looking at combination 1000/6000 grit Japanese waterstones and the Fallkniven DC4. Any pointers as to which direction to go?The DC4 is nice and portable H - comes in a neat leather sheath you can strop on too. Had one for about 10 years and can't complain.
-
@hiraethus said:
I'd like to practice my freehand sharpening. Currently I've got a combination oil stone that's been abused and is no longer flat. Would like something not too expensive to start with for sharpening SAKs and other smaller blades, occasionally kitchen knives. Been looking at combination 1000/6000 grit Japanese waterstones and the Fallkniven DC4. Any pointers as to which direction to go?I'm in the same situation as you, would love to get better at freehanding. I do have the Turnbox and it works well for quick touch-ups. I also have the DC4 but it's way to coarse for my liking, great for reshaping or touching up axes or larger knives in the field.
My father has a Japanese combo-stone at 1000-6000 and it's working very well for him. -
@magentus said:
The DC4 is nice and portable H - comes in a neat leather sheath you can strop on too. Had one for about 10 years and can't complain.Cheers M.
The DC4 does look like a nice little unit, but I wonder if the waterstones, being about twice the length, would be more useful. I keep a Vic pocket ceramic sharpener in my bag to touch up edges and can get a good edge with it so don't need something portable.Maybe we should all bring a bunch of sharpening stuff to the meet and have a shave-off. :o
@Fortytwo said:
I'm in the same situation as you, would love to get better at freehanding. I do have the Turnbox and it works well for quick touch-ups. I also have the DC4 but it's way to coarse for my liking, great for reshaping or touching up axes or larger knives in the field.
My father has a Japanese combo-stone at 1000-6000 and it's working very well for him.Interesting that you find the DC4 coarse. I've got a Turnbox and it's very good, and a Lansky 3-stone (Standard?) that I find useful but fiddly - in fact I tend to just use the stones freehand anyway.
I do reckon that a bigger working area would work better. Hmmmm.....
-
The DC4 is nice and portable H - comes in a neat leather sheath you can strop on too. Had one for about 10 years and can't complain.
Cheers M.
The DC4 does look like a nice little unit, but I wonder if the waterstones, being about twice the length, would be more useful. I keep a Vic pocket ceramic sharpener in my bag to touch up edges and can get a good edge with it so don't need something portable.Maybe we should all bring a bunch of sharpening stuff to the meet and have a shave-off. :o
@Fortytwo said:
I'm in the same situation as you, would love to get better at freehanding. I do have the Turnbox and it works well for quick touch-ups. I also have the DC4 but it's way to coarse for my liking, great for reshaping or touching up axes or larger knives in the field.
My father has a Japanese combo-stone at 1000-6000 and it's working very well for him.Interesting that you find the DC4 coarse. I've got a Turnbox and it's very good, and a Lansky 3-stone (Standard?) that I find useful but fiddly - in fact I tend to just use the stones freehand anyway.
I do reckon that a bigger working area would work better. Hmmmm.....
If you're not after portability go for something bigger than the DC4 then. How about the DC4k (1000 times the size of the DC4) It's so big you have to have it installed on the ground floor on a specially made concrete plinth.
I feel weird enough going to a multi tool meet without adding in a shave off as well. That would take the biscuit. I'm not playing that game either.
-
4K, eh? HD knife sharpening. 8)
-
I'd recommend one of the Edge Pro esque Lansky systems to most people, the Edge Pro's price isn't worth it to most people who's edges aren't going to be any better with the Edge Pro vs the other system, there's a "You got it" and a "You don't got it" to everything.
The Wicked Edge is probably where that person could get a better edge, but systems like the Edge Pro require a certain touch to get to a certain level IE the human error is greater for a non-fluent individual. I have no ill feelings towards anybody but it seems to me that for most people getting the Edge Pro isn't necessary especially since they'd likely get the same results with a Lansky.
-
I think I move to coffee mugs:
Fine sharpeners are hard to find. Example diamond files I have are quite rough. Only really fine one I have is the stone for straight razor. But have not used that with other knives.
-
I have a Lansky Turnbox and a Spyderco Sharpmaker that I use 95% of the time. I also have a smiths pocket stone, but it's quite old and doesn't see a ton of use. Most of the time it's the Sharpmaker.
-
I have a large (roughly 10 inches) soapstone I inherited that is on my workbench. I keep a Smith's pocket oilstone in the knife box, along with a few pocket stones that are coarser for used knives that someone really abused, which resulted in chips and nicks that I'll have to remove before going to the soapstones. Baby oil or WD-40 is used as honing fluid.
The general consensus among me and my knife-owning friends is that pull-throughs and power sharpeners are only for use on cheap knives. And yes, they do wreck blades. The blade on an old Colonial electrician's knife I had as a kid looks like crap from the years I used pull-throughs.
-
@cody6268 said:
I have a large (roughly 10 inches) soapstone I inherited that is on my workbench. I keep a Smith's pocket oilstone in the knife box, along with a few pocket stones that are coarser for used knives that someone really abused, which resulted in chips and nicks that I'll have to remove before going to the soapstones. Baby oil or WD-40 is used as honing fluid.The general consensus among me and my knife-owning friends is that pull-throughs and power sharpeners are only for use on cheap knives. **And yes, they do wreck blades. ** The blade on an old Colonial electrician's knife I had as a kid looks like crap from the years I used pull-throughs.
That they do. Carbide is a fantastic cutter, but it shears material off and tends to micro-scallop when the depth of cut is not consistent. This is especially true of harder blade steels. The carbide pull through sharpeners work fine on really soft blade steel that you just want sharp enough to open a letter or something, but there is no way to put a truly NICE edge on anything with one.
-
@hiraethus said:
I'd like to practice my freehand sharpening. Currently I've got a combination oil stone that's been abused and is no longer flat. Would like something not too expensive to start with for sharpening SAKs and other smaller blades, occasionally kitchen knives. Been looking at combination 1000/6000 grit Japanese waterstones and the Fallkniven DC4. Any pointers as to which direction to go?H,
I have a few spare bench stones I can bring to the meet if thats what you are after?
-
I'm in the same situation as you, would love to get better at freehanding. I do have the Turnbox and it works well for quick touch-ups. I also have the DC4 but it's way to coarse for my liking, great for reshaping or touching up axes or larger knives in the field.
My father has a Japanese combo-stone at 1000-6000 and it's working very well for him.Interesting that you find the DC4 coarse. I've got a Turnbox and it's very good, and a Lansky 3-stone (Standard?) that I find useful but fiddly - in fact I tend to just use the stones freehand anyway.
I do reckon that a bigger working area would work better. Hmmmm.....
Well, when you start comparing it to a 6000 grit waterstone it seems very coarse in comparison and the diamond side is really coarse when new (a common trait when it comes to diamond as I understand it).
-
@Sparky415 said:
H,
I have a few spare bench stones I can bring to the meet if thats what you are after?
Thanks Sparky - it would certainly be good to compare different stones, even if I do end up with something else before the meet. I've added a request to the meet thread for various sharpening solutions.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login