Squirt not springing back
-
Thanks guys for the responses. Pliers are not bent, there appears to be a slight burr on the wire cutters but I can't find anything small enough to get in there to file it flat. Going to start another thread on the squirt, maybe I have overestimated its abilities.
-
Just thought of something else, I received the Squirt as a gift, am I still eligible for a replacement?
-
Try some fine grade sandpaper.
-
Thanks boys, will try the sandpaper, failing that, will send it in but...I've become really attached to this tool, don't know how I'll live without it :)
-
Just putting it out there, but the Squirt is definitely not a tool I would use to cut a coat hanger wire with and would expect it to get damaged in such situations. I wouldn't even want to do it with a Juice. I would only feel comfortable doing it with a full size Leatherman.
Hope you get things sorted out though.
-
@captain spaulding said:
Just putting it out there, but the Squirt is definitely not a tool I would use to cut a coat hanger wire with and would expect it to get damaged in such situations. I wouldn't even want to do it with a Juice. I would only feel comfortable doing it with a full size Leatherman.Hope you get things sorted out though.
Fair enough Captain, guess I might have to look at something bigger, any strong recommendations?
-
@captain spaulding said:
Just putting it out there, but the Squirt is definitely not a tool I would use to cut a coat hanger wire with and would expect it to get damaged in such situations. I wouldn't even want to do it with a Juice. I would only feel comfortable doing it with a full size Leatherman.
Hope you get things sorted out though.
Fair enough Captain, guess I might have to look at something bigger, any strong recommendations?
It really depends on how big you want to go and what tools you want?
-
A juice will cut it, but it is something I wouldn't do all the time. If your gonna be cutting wire all the time, maybe a Wave or a Rebar might be in order.
Nate
That's us mobile -
@ducttapetech said:
A juice will cut it, but it is something I wouldn't do all the time. If your gonna be cutting wire all the time, maybe a Wave or a Rebar might be in order.The wire cutters on the Rebar pliers are replaceable, which is a good thing if you are going to cut much heavy wire. That way if they get damaged you can just swap in a new set of cutters.
-
If you can find a small file or sharpening stone to take that burr off, you can fix it in about 5 seconds. Its fairly common for these micro tools to bind up like that after you have asked them to do Big Boy work.
-
Thanks Powernoodle, I've found it hard to get anything in there, it's such a small area.
-
Ok, how about something even simpler? Like you just... wash it thoroughly with soap and water? I've had some of the smaller tools do that - get rather... sticky, so to speak and don't spring back while I thought they were clean. But I'd either cut fruit, let's say with them, or I'd put grease on them...and with some pocket lint (some stuff from the fabric you cut), it got quite sticky .... stuff around the spring/handles/wherever.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login