Keeping your multi sharp.
-
The only trouble with that style of sharpener is that they tend to remove a lot of steel as the carbide's are usually very hard :(, plus unles you really smooth and consistant, it's really easy to to put a notch in the edge :-\
I think your money would be better spent on a Falkniven DC3 or 4 :)
-
Sharpening Made Easy all you need to know about sharpening in one easy click. I have "made" one of Steve's "paper sharpening" setups and it works like a champ ... Using Paper Sharpening Wheels
@Splat said:
Any opinions on DMT or their Diafold sharpeners? Thanx.Splat
DMT are too abrasive for me... I prefer ceramic or paper as an alternative sharpening media. They are just as quick as a ceramic sharpener, however nothing will beat a waterstone. Here is a speed VS sharpness chart
#1. Down and Dirty - sharpen everything - get a Spyderco Sharpmaker - they are great for keeping sharp knives sharp than really working on dull ones.
Even better yet look at the following and see how easy it is to get a professional edge on a blade......
#2 DIY with paper wheels !!! Buy a bench grinder at a garage sale ( if the grinder has a removable base, and most do, you can remove it and turn it around so the switch is on the front side ) + a buy set of paper wheels for $37. That and a SharpMaker you'll have everything you need to sharpen anything and keep them sharp.
#3 Buy Steve's book Chapters 1, 2 and 3 were printed in the June and July 1999 issues of Knife World as A PRIMER ON KNIFE SHARPENING.
#4 Read the articles / chapters / links on Steve's site there is a lot og FREE and useful info here
I am in no way connected with any of the above referenced site, books or hardware - just a very happy " now professional " knife sharpener thanx to Spyderco and Steve's book AND paper wheels. I can't say enough good things about how easy it is to sharpen with the paper wheels, they are amazing !!
-
I recently ordered a Spyderco Sharpmaker for my father, who was looking for an easy and effective way to sharpen knives. He wanted an electric one, and I had a hell of a time talking him out of it! :ahhh
I've used similar doodads to the one pictured, and honestly, I don't much care for them. Maybe it's my shaky hands, but I've never gotten decent results from them, and they never manage to do the tip all that well.
My favorite sharpener is pretty simple and convenient:

I have two of them, both triangular with hook sharpening grooves, one in ceramic and one diamond. They are fast and convenient and just need a hard surface to put them on to quickly and easily touch up a blade. And, you can often find them for $10-15, and they can go virtually anywhere- glove box, tackle box, knife drawer...
Def
-
Next to repairing Leatherman tools i also do the sharpening on these and all kinds of other knives, mainly hunting- and pocketknives.
I use a Tormek machine primarily, as most knives that have been sent to me have no edge to speak of and the machine saves me a lot of work.
The Tormek works with a broad, slow turning stone that hangs in a water basin, so there's no overheating of the edge.While the Tormek has several clamping devices for blades, i find that the knives on multitools are generally too small and narrow for these, so i sharpen them freehand on the machine to about 30 degrees inclusive and then give them a 40 degrees microbevel on a Spyderco Sharpmaker.
This makes it also easy for the customer to maintain that edge on the Sharpmaker as it is widely used over here, -
I use a Lansky Crock Stick. I have the deluxe model but the standard one would be good enough. Easy and fast.
-
Silly as it sounds, I've had the best and most consistent sharpening luck with one of those $3US Smith's Pocket Sharpeners they sell at Wal-Mart. It has a preset angle and ceramic rods. I have a Lansky-type 3 stone sharpening system, a Gerber diamond rod and a Smith's carbide sharpener like the one pictured in the first post (I had HORRIBLE luck with that one- the carbide sharpeners ruined the edge of my Buck General and my Schrade Sharpfinger). I just have really inconsistent results (my fault, obviously). The pocket sharpener put a very good edge on my Bear and my Camillus survival knife. I carry one pocket sharpener in my pack and one in my car.
Your results may vary from mine. One warning if you go to Wal-Mart: DO NOT BUY THE POCKET RENEGADE-BRAND DIAMOND SHARPENER!!! That thing is the biggest piece of junk they sell! It ruined the edge on my higher-end Japanese bowie knife to the extent that I had to use the Lansky clamp system just to get a reasonable starting edge to re-sharpen.
Good Luck, Bill.
-
Being a utterly talentless yet overpaid middle class git, I just pay someone to sharpen things for me.
-
I use a pocket DMT and a large sharpening stone :) But I am still not very good @ putting a razor sharp edge on a knife :( But the good news is the more I prctice it the better I am getting ;)
-
Using the back of a leather belt as a strop can really help and edge after sharpening also.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

