What did you use your Leatherman for today?
-
I've been carrying my BO Mini all week. Today smurf hit the fan when I received more stock than I could handle.
I needed to re-merchandise a large area,and put new shelves in. The only shelves available were knackered. The mounting tabs were bent up to 90 degrees out. Much to my surprise and delight,the Mini worked a charm straightening them!
:ahhh :ahhh :ahhh MINI! :ahhh :ahhh :ahhh
-
Used my Skeletool to re-attach some key hooks to the laundry room wall. I had forgotten how well the drivers work.
Also used Skeletool to cut some paracord for wife.
-
I used my PST II scissors to cut out a form for one of my coworkers and the pliers to hold a nut from spinning while we were fixing our door handle.
-
Used my wave to hold a bolt on my headboard while I tightened the nut with a wrench, then I used a modded saw blade(thx Baldux) in the pocket clip slot to shorten the bolts. Finished them smooth with the file.
-
Used my Wingman to help repair my bike.

Should have used the wave, screwdrivers/prybars that fold in on ones fingers are quite annoying!
Sent from my XT1068 using Tapatalk
-
Took apart a Traxxas eRevo axle and cut out a Papa Murphys coupons with my Charge TTI.
Sent from my iPad using Tapatalk
-
Used my Wingman to help repair my bike.

Should have used the wave, screwdrivers/prybars that fold in on ones fingers are quite annoying!
Sent from my XT1068 using Tapatalk
Needs a good clean as well. [emoji14]ok:
It'll get that once it gets the back wheel put on [emoji14]
Sent from my XT1068 using Tapatalk
-
My Rebar saved the day, helped tightening some connections on a friends boat, otherwise we would have drifted there for a while..
It was a good day. -
I used my Rebar to saw through a piece of PVC pipe and then pry the chunks of it out of a drain pan in a fan coil unit.
-
I used my Wave to repair an antenna and with the temperature being 95 I also used it to open many bottles of Becks.LOL.
-
How do I explain this?
My Chevrolet 2500HD Duramax has an air intake, and on that air intake there used to be a "silencer" chamber. Pretty much an air trap to hold in some whistle noises from the turbo.
Well I took it off and replaced it with a cap.
Yesterday I noticed some EXTREME power loss. Was taking 45 seconds to get up to 60mph.
Well I opened the hood today to pull a fuse and it was sitting on top of the engine!
So my Wave tightened her back up.

-
I used the scissors on my PST II to cut some fishing line while I was out on the stream.
-
I used the blade on my Rebar to open a box for a canopy.
-
Used the serrated blade on my OG Supertool to cut a plastic bottle to make a scoop to clean out gutters.The pliers were used to pull out the old gutter guard mesh.
-
Those blades work great for cutting those bottles, don't they Steve? I'm going to make a scoop like that, as my gutters are in need of some attention right now! Thanks for the idea!
-
Yes, they work better than the sheepsfoot serrated blade for that task.
-
I used my PST to fix the latch on my screen door. It almost came off in my hand, but didn't stand a chance against the mighty PST!

-
My 9 yr old son used the bottle opener on my PST II to open his soda bottle. Way to go Zach!!

-
I used the serrated blade on my Rebar to slice off a length of hose for a project at work. I also used it(pretty much daily now) to essentially break in to our pool area so I could do my rounds. The Security department has insisted on locking out the keycard locks at closing time, to keep guests out. But I work overnight and need in to the area all the time. I figured out that if I stick my pliers in the closed position into the striker, I can force it open in about half a second.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
