Maritime MultiTool
-
That would be Special . Well worth a thought .
Dunc
-
Hey, why stop there? :D

In all honesty, I think this should be a choice made by your father. He may (or may not, I wasn't paying attention
) have less experience with multis than you do, but he's got some years on you for sure. Considering he may be trusting this tool with his life some day, it's only fair you at least ask his opinion on the matter. Yes, it may spoil the surprise for you, if you're prepared to make this sacrifice. -
I'd imagine it would go black
, so your probably right Dave :) -
The only problem if we are too find a MT that he wants and like, is that there is basecly no other MT on the marked in Norway than LM. I have decide that MT and one hand opening knife is a combination that would be best than just a MT.
-
well why dont u then try to buy old model wave and some spydercos byrd-knives,that wouldnt me SO tough on your wallet,im sure that some of us can help u get an mt a lot cheaper than buyin from norwegian stores.how muw in EUROS does in example a wnew wave cost to you there man?
-
What about the Vic Skipper? I have one and I LOVE it! It has a great assortment of tools you would need on the high seas as well! 8)
-
I'm surprised nobody has mentioned the Alinghi.


It's made for boating. One-hand opening blade, Marlinspike, pliers, screwdrivers, bottle openers and awl.
There's a Euro version that's 2-hand opening and has a corkscrew instead of a Phillips. -
It was mentioned at least twice so far! :D
Def
-
-
If it's going to be a user multitool, I don't think you can go wrong with a good Leatherman, Sog, or Vic. Sure the Vics are fairly rust resistant, but so are the others. They can tend to rust a little more, but it's surface rust. Take a bandana to it, wipe it off, and you're good to go. Sailors, pirates, fishermen, etc., have carried knives out on the open ocean for hundreds of years, and back then it was the carbon steel ones, with nary a worry. The knives didnt rust up and disappear, and they kept them in working order. Our current stainless steels, specially the ones used in good multitools, are more then adequate for use over water. And like I said, if a little surface rust DOES appear, just take a bandana to it, wipe it off, apply a dab of oil, and you're good to go.
-
One-hand opening is a very good thing for this purpose.
You may be using the other hand to hold onto the rail if you're in a rough sea. -
@Navajero316 said:
If it's going to be a user multitool, I don't think you can go wrong with a good Leatherman, Sog, or Vic. Sure the Vics are fairly rust resistant, but so are the others. They can tend to rust a little more, but it's surface rust. Take a bandana to it, wipe it off, and you're good to go. Sailors, pirates, fishermen, etc., have carried knives out on the open ocean for hundreds of years, and back then it was the carbon steel ones, with nary a worry. The knives didnt rust up and disappear, and they kept them in working order. Our current stainless steels, specially the ones used in good multitools, are more then adequate for use over water. And like I said, if a little surface rust DOES appear, just take a bandana to it, wipe it off, apply a dab of oil, and you're good to go.I like that reply :D You do have a very good point there ;)
Dunc
-
@Tarrodemierda said:
well why dont u then try to buy old model wave and some spydercos byrd-knives,that wouldnt me SO tough on your wallet,im sure that some of us can help u get an mt a lot cheaper than buyin from norwegian stores.how muw in EUROS does in example a wnew wave cost to you there man?A brand new LM Wave cost around 150 Euro/220 $ in Norway, I could get 4 Swisstools from Felinevet Tim at that price. I am strongly thinking about a Wave, butt then again you have SOG and the compound leverage. Butt does the laser engraving have any effect on the rust resistance??
-
@AndyTiedye said:
One-hand opening is a very good thing for this purpose.
You may be using the other hand to hold onto the rail if you're in a rough sea.Another very good point :) Thats why I cary a Spyderco ;) Even I think theres a place for one hand opening :D
Dunc
-
well why dont u then try to buy old model wave and some spydercos byrd-knives,that wouldnt me SO tough on your wallet,im sure that some of us can help u get an mt a lot cheaper than buyin from norwegian stores.how muw in EUROS does in example a wnew wave cost to you there man?
A brand new LM Wave cost around 150 Euro/220 $ in Norway, I could get 4 Swisstools from Felinevet Tim at that price. I am strongly thinking about a Wave, butt then again you have SOG and the compound leverage. Butt does the laser engraving have any effect on the rust resistance??
well ill be damned,here new wave is also expensive,<u>139 euros.</u>
the engraving wont affect anyway to rusting,thats for sure. -
Engraving will take off the surface polish, thus opening it up to rust, but like I said, it won't be a big deal. And yes, Leatherman can be a bit expensive. Maybe that will be the ultimate determining factor, cost. Like I said, we all go back and forth on what tool is best, or which one we like, and while some are superior in certain aspects over others, at this point in the game, you can't really go wrong with any Leatherman, SOG, or Vic. Swisstool cheaper then a Wave? Go for that. Maybe a Spirit? Some are less expensive then others, but none are "cheap".
-
@Navajero316 said:
Engraving will take off the surface polish, thus opening it up to rust, but like I said, it won't be a big deal. And yes, Leatherman can be a bit expensive. Maybe that will be the ultimate determining factor, cost. Like I said, we all go back and forth on what tool is best, or which one we like, and while some are superior in certain aspects over others, at this point in the game, you can't really go wrong with any Leatherman, SOG, or Vic. Swisstool cheaper then a Wave? Go for that. Maybe a Spirit? Some are less expensive then others, but none are "cheap".Agreed!! If they were cheap I would have a new 1 or 2 every week, but you gotta admit, if they had MT like these back when our grandparents were comin up, they would have a garage full of them.
-
well im stubborn and disagree since if the material is stainless steel,it dont rust even if u drill thru it,but i agree that the engraving will take some dirt in,and if the material aint totally stainless,it might have some more surface rust.but a tool that is used and maintained wont rust,but if it just sith in its sheath at seas for days without usin it and maintenance,ofcourse the cast "stainless" will start to stain.there aint no stainless steel IMo,i can dig in ground one used swisstool and dig it up in next summer and well see about the"stainless" factor.ok?
-
@Tarrodemierda said:
well im stubborn and disagree since if the material is stainless steel,it dont rust even if u drill thru it,but i agree that the engraving will take some dirt in,and if the material aint totally stainless,it might have some more surface rust.but a tool that is used and maintained wont rust,but if it just sith in its sheath at seas for days without usin it and maintenance,ofcourse the cast "stainless" will start to stain.there aint no stainless steel IMo,i can dig in ground one used swisstool and dig it up in next summer and well see about the"stainless" factor.ok?Remember, stainless is not stain free, or for the sake of this thread, rust free. ANY steel will eventually rust. Stainless just means it will hold up BETTER to rust. It's not totally resistant, though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Seems like a logical tool for sealife ;)