IT Tech tool recommendation
-
I'd say the pliers would prove to be invaluable for what you would use it for.
-
@Benner said:
I'd say the pliers would prove to be invaluable for what you would use it for.Agreed. I had right fun with a ribbon cable in an old Sony laptop the other day. The pliers were just right for holding it in place whilst I wedged a bit of plastic in its connector. They were also good for retrieving dropped screws, shifting jumpers on the back of drives. They do other useful stuff but that's all that I used them for on this particular machine :)
Neil
-
You might also want to consider pairing the Cybertool 29 with a Squirt P4. The P4 is fairly cheap, about 58mm long.
This would give you slightly beefier, separate set of pliers, so you could use the CT driver and pliers at the same time.
-
I'm just trying to wonder why anyone can think they can fix a computer with any of these tools - None of them have a hammer!
-
A lot of the "techs" out there aren't trying to actually fix the computer anyway. They just need to look busy while convincing you to buy a new computer from them.
-
I'd go for a Paladin tool of some sort.. I think they would fit the bill quite nicely.. If you don't want to spend too much (PT-525) then just go for the PT-510.. It is lighter and it still has a good amount of features for your line of work...
-
@Leatherman123 said:
I'd go for a Paladin tool of some sort.. I think they would fit the bill quite nicely.. If you don't want to spend too much (PT-525) then just go for the PT-510.. It is lighter and it still has a good amount of features for your line of work...I looked at the Paladins, but while it would be nice in many ways, it's heavier than I want to go.
-
I agree. The Paladins look amazing for stuff like network wiring, but they are too large and unwieldy for poking around inside cases and precision work.
If I had a Paladin, I would probably compliment it with something smaller for that reason.
-
@Turing Complete said:
I'd go for a Paladin tool of some sort.. I think they would fit the bill quite nicely.. If you don't want to spend too much (PT-525) then just go for the PT-510.. It is lighter and it still has a good amount of features for your line of work...
I looked at the Paladins, but while it would be nice in many ways, it's heavier than I want to go.
You might want to look at the SOG pocket powerpliers,they are 5.5 oz. and you can still change out what ever components you want.
-
I don't see the Paladins and PPP to really be suitable IMO.
-
Then I'd go for the CyberTool 34.. Or, if you absolutely need a saw then get the 41 instead!
-
If you're already used to SAKs might as well go with one of the Cybertools.
I lean towards the Cybertool Lite and the SwissChamp XLT (a.k.a. Cybertool XL in some markets).Another way to go would be the Cybertool 29 paired with a LM Squirt E4.
-
Well, I decided on the Cybertool 34 thanks to all the recommendations here. I'm still not sure if it was the right choice, but I figured that if I got the Cybertool 29, I'd still end up getting something else for the pliers anyway.
Thanks for all the help. I've already used the Torx bits and the scissors, so it was good I got those!

-
@Turing Complete said:
Well, I decided on the Cybertool 34 thanks to all the recommendations here. I'm still not sure if it was the right choice, but I figured that if I got the Cybertool 29, I'd still end up getting something else for the pliers anyway.Thanks for all the help. I've already used the Torx bits and the scissors, so it was good I got those!

Great choice mate :), let us know your thought's on it once you've had it a while please mate :)
-
I swear we're all enablers here.... of spending! ;) >:D After having to work on a friend's PC tonight, then coming home and reading this thread I Ebay'ed and found an excellent-condition used Cybertool 34 for $45 w/shipping. I'm stoked! Everything I needed to do tonight would've been handled easily by the Cybertool instead of me having to hunt around in a basement for tools. I guess this was my birthday present to myself, though a little late (Sept 6). :tool:
-
You should also get a "Radio Shack" Leatherman. I use one for taking PCs apart and it handles 95% of the screws.
-
@Splat said:
I swear we're all enablers here.... of spending! ;) >:D After having to work on a friend's PC tonight, then coming home and reading this thread I Ebay'ed and found an excellent-condition used Cybertool 34 for $45 w/shipping. I'm stoked! Everything I needed to do tonight would've been handled easily by the Cybertool instead of me having to hunt around in a basement for tools. I guess this was my birthday present to myself, though a little late (Sept 6). :tool:Happy late birthday
I'm sure you'll find the CT34 does the job for you... well, until you get the SAK itch again ;) >:DNeil
-
@american lockpicker said:
You should also get a "Radio Shack" Leatherman. I use one for taking PCs apart and it handles 95% of the screws.A.K.A. the Leatherman Squirt E4. Search on that if you'd prefer not to have the "Radio Shack" logo.
Note that the E4 has a real Phillips instead of the flat Phillips that the P4 has.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login