What did you use your Sak on today?
-
Spot of gardening after work - cutting canes and string with my Spirit to make a framework to keep the pigeons off my French beans and slicing freshly picked strawberries with my Pioneer.
-
Did some gardening as well. Used my Evo 16 to pick some of our peppers to make salsa later.
-
Used my swisstool sprit to build a 6 burner gas grill for my dad for father's day.
-
Well my first ever sak got taken out of retirement today, I needed a magnifyng glass, and well it's the only one I got, besides a lamp..
JR -
Today at work I used the locking flat driver/prybar to pry off wood framing around a cardboard box we were getting ready to empty and load, and the awl to start some holes for screws to re-attach said framing when we realized the customer was expecting shipment on JULY 20, not June..... ::)
-
I use the scissors of my Climber to cut my finger nails.
-
We were all about to sit down for Father's Day dinner at my parents' when the corkscrew broke!
All seemed lost until I realized that I had my Vic SilverTech Climber in my purse!Saved the day!


-
Huntsman vs apple and cheese!

And the winner is, Huntsman!
-
-
-
We were all about to sit down for Father's Day dinner at my parents' when the corkscrew broke!
All seemed lost until I realized that I had my Vic SilverTech Climber in my purse!Saved the day!


Excellent!!!!!!!!!!!!! And if you had brought one with a Phillips, you'd been screwed..... :D
That is a terrible pun.
:D -
Hahaha I totally missed that!

I cut that way so I can take off little pieces without biting it. There's also another way I like to use on ripe mangoes. You try to cut as close to the seed as you can on both sides.
Then cut in diagonal squares leaving the skin uncut. Then you push it up. You get little square pieces. -
@mrynnr said:
Hahaha I totally missed that!
I cut that way so I can take off little pieces without biting it. There's also another way I like to use on ripe mangoes. You try to cut as close to the seed as you can on both sides.
Then cut in diagonal squares leaving the skin uncut. Then you push it up. You get little square pieces.This is what I do.
-
I also collect older diecast toys/models and purchased a Dinky Supertoys 661 Scammell Explorer Recovery Tractor off of Ebay, which arrived yesterday. .
First of all, I had to remove the foot diameter shroud of Saran wrap the seller used instead of a box. The scissors and blade on my Craftsman made (relatively) quick work of that.
Then I had to cut the bubble wrap the seller wrapped the truck in. Same tools were used for that job.
Then I had to replace the string and hook. The string, which had to be so thin I had to borrow some of my grandmother's quilting thread to replace it with, was cut with my blade (for some reason, the scissors on both of my 91mm SAK's don't cut thread, only Wenger scissors do that job well, perhaps due to wear, as my Fieldmaster is ten years old, and my Craftsman's at least 25) then subsequently cut with my Wenger MicroLight Esquire's scissors.
The area where the winch drum was on the little wrecker was so cramped, I wouldn't have been able to do it without the Craftsman's tweezers (which was the smallest pair I had) which I used to thread the leangth of quilting thread through the pinhole sized securing eye on the winch drum. After tying the hook and thread on, I removed the excess string with the scissors.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




:D