What Did You Use Your Multitool For Today?
-
and, yes, all my troubles did seem so far away after drinking all that beer

-
I did use my Rebar and Topeak mini 9 to fix and repair some on all of my three bikes.

-
My GAK had a full day cutting straps, prying open crates, threatening my computer..... ::)
-
My Surge took a couple parts off of the digital press so I could clear out a sheet of paper that was very much where it didn't belong.
On my lunch I filed down the kick on a couple proud blades of my Böker carver with the diamond file on the Surge.
Oh and I used the sewing eye on my SAK Explorer awl to thread the twine back through the balk on my son's paddle ball.All in all a good multitool day.
-
Used my Squirt PS4 to lower the charcoal rack in my grill. It was hot.
-
I used my vic classics knife to cut the adhesive tape, I use to put on the folder to tape the information page at the front for the construction file.
Using a future communicator stolen from the NCC-1701
-
Today fixing extension cord...
Stanley for deep recessed screws (I really appreciate magnetic tip)
Victorinox small blade for isolating tape cutting
Leatherman MiniTool for wite cutting
Atwood for wire strapping


-
And one more chore.
Old rakija bottle needed cork fitting so LM and VIC job...


Job done

-
Yesterday, I used my Rebar blade to open up our new lawnmower.
-
I used my swisstools wood saw to remove some overhanging tree branches at my father in laws house. The Swisstool did a faultless job.

-
Used my Swisstool to repair my sons bike , the wheel nuts had come loose and the chair had come off.
The Swisstool pliers did a fine job on the wheel nuts. -
used my PST to help remove an Astro XTL 5000 radio from a fire truck
-
Used my Spirit and Pioneer to help fit a towel rail in the bathroom:
<a href="https://flic.kr/p/uiScxM" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/426/18580164383_11ed34e400_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
(Used the file to take a chunk out of my index finger at the same time too ::) )
-
Back at my in-laws, I was putting together a guest bed that they bought at Ikea. ST300 provided a blade to open all the packaging, phillips and flat drivers, hex bit w/ adapter, pliers, and even pounded in little plastic dowels. No pictures, but I did have a nice chat with my father-in-law about why he needs one ;)
-
Riding by bike home from work earlier, one of the pedals nearly fell off! >:( The nut holding the arm to the bike had worked itself almost completely off. My MP600's pliers got it tight enough to make it home and to a socket set.

-
Used my Wave a million times opening boxes and assembling a Canon copier. Those machines have way to many pieces. [emoji20]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
