Leatherman leather sheaths
-
@appletree_man said:
Just got my first old style sheath, what a difference between these and the crappy current lot.
Has Leatherman ever commented on the new sheaths, perhaps tried to defend the decision to change them ? I'd gladly pay extra for the old style.I just posted this on the Trade forums thread:
*That's certainly the one I was on about on the Crunch thread ATM. I looked afterwards and I have that style of sheath for the PST / PST II, Flair, Crunch, Supertool and another one which I can't tie up to a tool at the moment......
For me, it would be hard to better. FWIW, there's plenty of these on ebay, but try to make sure that it has "Leatherman" stamped on the brass press-stud though. I bought a bunch of them without the stamp a while back, and when they arrived they were not quite as good as the factory supplied ones. They may be knock-offs, as the quality of the Leatherman name on the front is not as crisp, the overall quality is inferior and there is blue oxide forming on some of the rivets. They're still servicable, but nowhere near the quality of the real thing!*
-
@DaveK said:
but try to make sure that it has "Leatherman" stamped on the brass press-stud though.I have a PST leather sheath that came with the PST it is 14 years old and it doesn't have the LM stamp on the stud, but the words are crisp and it's not forming any blue oxide either.
Hope I don't end up buying a knock-off didn't know there was a difference thanks
:D -
Well it's my assumption that they were knock-offs - they could be seconds / rejects I suppose.
All of mine (bar the above) have the stamped press stud, but it sounds like LM may have made some like that after all.
-
I'm with Def, I like the Charge leather sheaths a lot.. They are very high quality!
-
@Poncho65 said:
coming from the man who has broken the eyeglass bit and pocket clip ::) I've had nylon sheaths with velcro outlast leather because the snaps fail, that could be because I am around a lot of dust and mortar though
I think both have pros and cons :) which is my opinionWell, the pocket clip thing is beyond me, but the screw driver bit was dropped I can admit too that. I think probably because I use the tool so much throughout the day and the sheath gets opened and closed so much thats why.
-
@jdailey4206966 said:
Well, the pocket clip thing is beyond me, but the screw driver bit was dropped I can admit too that. I think probably because I use the tool so much throughout the day and the sheath gets opened and closed so much thats why.We could just go and do like Def and LM123 suggest and get the Charge sheath for our Waves :D I think that both the leather and nylon are nice looking and both have extra pockets ;)
-
-
A noob's perspective:
I just got my 1st LM - a new Charge AL with the leather sheath shown above in Def's post (since the new guy didn't get the free kwakster beauty ??? ). I'm coming from using Gerber MT's in their velcro-flap nylon sheaths. I'm not happy at all with the kung-fu death grip the elastic sides on this sheath have on the tool. It almost takes a two-handed extraction to get the tool out of the sheath! And the problem is made worse by keeping the extra bits in the back slot, which are part of the reason I went this direction in the first place - to have extra the bits handy.Seems to me that the tool should be easily removed from the sheath once the flap is unsnapped - I've been shopping around for a looser fitting sheath for this...maybe going back to a nylon one, or even a molle version, but that's not really practical for my EDC needs...
-RenHoek
-
Mine was the same at first, but the sheath will loosen up quite quickly Renhoek - stick with it.
In mine I EDC my Charge, a mini-Maglite in one of the elasticated side compartments, and a Fisher Space pen in the other. I also carry the bit-kit in the back and I can get the MT out really easily now.
-
I found an old Leatherman sheath - one of the ones with "Leatherman" in gold lettering diagonally across it
It is slightly larger than a PST sheath in all dimensions, though unlike the PST sheath, which has sides that go all the way to the top and the flap secures with no gaps, this one has a big ol' space so you can
A. See the tool from the side
&
B, probably easier to grab the tool.I estimate it's age at around 2002/2003 (the date on my PST that has a similar style sheath)
Presumably it is for a Supertool, as I'm told the early wave sheaths were straight up fancy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
