What did you use your Sak on today?
-
Deadheaded a load of flowers in the garden
Opened beer
-
So I up on an extension ladder removing oak tree "beards" and maple seeds which were matted on the screen over my rain gutter located above my deck. The gutter screen is screwed into the gutter in the front of the gutter and on the back side is held in place by friction. I found a photo online which shows the type of screen.
A poor design in my opinion.
I noticed the screen had dropped down in the gutter a couple of inches in several places on the back side. So I'm up in the air on a ladder trying to figure out what I could use to pull the screen back to where it should be. I pulled out my SAK Climber and found the hook would fit between the diamond shaped mesh and it worked perfectly to pull the mesh back into place.
I don't have any pictures of the hook in action, but I hope the powers that be will have sympathy on an older guy not wanting to get a camera and climb the ladder again to get a picture for a merit badge.

-
Watermelon tasting
-
@kilowatt said:
So I up on an extension ladder removing oak tree "beards" and maple seeds which were matted on the screen over my rain gutter located above my deck. The gutter screen is screwed into the gutter in the front of the gutter and on the back side is held in place by friction. I found a photo online which shows the type of screen.A poor design in my opinion.
I noticed the screen had dropped down in the gutter a couple of inches in several places on the back side. So I'm up in the air on a ladder trying to figure out what I could use to pull the screen back to where it should be. I pulled out my SAK Climber and found the hook would fit between the diamond shaped mesh and it worked perfectly to pull the mesh back into place.
I don't have any pictures of the hook in action, but I hope the powers that be will have sympathy on an older guy not wanting to get a camera and climb the ladder again to get a picture for a merit badge.
I have used the hook for very similar purposes, hardware cloth, expanded metal, woven materials and the like. A very handy tool with much merit.

-
Been using my Marly Standard to help build a 1/144 scale Mig 31 Foxhound
-
2010 Soldier on a stick of biltong. Oh and a Gardiner too.....
My son insisted.They actually print "biltong knife" on the sides of the Gardiners here (well some at least). True story I can provide pics.

-
@kilowatt said:
So I up on an extension ladder removing oak tree "beards" and maple seeds which were matted on the screen over my rain gutter located above my deck. The gutter screen is screwed into the gutter in the front of the gutter and on the back side is held in place by friction. I found a photo online which shows the type of screen.A poor design in my opinion.
I noticed the screen had dropped down in the gutter a couple of inches in several places on the back side. So I'm up in the air on a ladder trying to figure out what I could use to pull the screen back to where it should be. I pulled out my SAK Climber and found the hook would fit between the diamond shaped mesh and it worked perfectly to pull the mesh back into place.
I don't have any pictures of the hook in action, but I hope the powers that be will have sympathy on an older guy not wanting to get a camera and climb the ladder again to get a picture for a merit badge.
Sympathy no, appreciation for your ability to link to a post yes.
We use a similar mesh here and fasten it to both the gutter and the roof. -
One of my other hobbies is RC trucks.
The body clips on the 1/8 scale ones can be pretty thick. Usually, I end up either bending them up to make them easier to grab ahold of, or put a twist tie or zip tie on them.
But I hadn't done it yet and one time last week, my fingers were sweaty and I couldn't get the !@#$% things out to change batteries. It was then that I remembered the Super Tinker in my pocket, whose hook saved the day!
Here's the truck in question, with my 3 year-old for scale: (It's a Kyosho Mad Force Kruiser 2.0VE, if you're curious)
-
Nice!

-
Very cool!
-
Cut some lemons (we call these lemons not limes) to mix with some mineral water.

-
@ebarberena said:
Cut some lemons (we call these lemons not limes) to mix with some mineral water.looks like calamansi? (Calamondin)
-
@Smaug said:
One of my other hobbies is RC trucks.The body clips on the 1/8 scale ones can be pretty thick. Usually, I end up either bending them up to make them easier to grab ahold of, or put a twist tie or zip tie on them.
But I hadn't done it yet and one time last week, my fingers were sweaty and I couldn't get the !@#$% things out to change batteries. It was then that I remembered the Super Tinker in my pocket, whose hook saved the day!
Here's the truck in question, with my 3 year-old for scale: (It's a Kyosho Mad Force Kruiser 2.0VE, if you're curious)
Now that is a good idea for use of the hook! I always bent the clip a little, I used to sooo be into r/c, but then things came up and I just never had time, then I got back into it again, and now just can't afford it, I got three sitting in the basement, two battery ones, one is an antique I just never got into play, but it's 4wd, 4ws, and chain drive. The third is 1/8th scale 4wd and nitro! You got a nice truck!
JR -
Cut some lemons (we call these lemons not limes) to mix with some mineral water.
looks like calamansi? (Calamondin)
Citrus aurantifolia according to the Mexican Agriculture Bureau:
http://www.siap.gob.mx/limon-agrio/
I think its very similar to a key lime. It is readily available in Mexico and is what should be used when drinking a low to mid grade Tequila. Should never be mixed with beer, that's just stupid Corona advertizing. If the beer is good enough it should be drank stone cold and straight. If not, drink something else, IMHO.
-
Nice idea with the hook! I used my Classic's blade to cut open the seals on some containers we have around.
-
I just used my Spartan Lite to fix my sandal. It had these plastic things to tie the ends together, but I couldn't get one of them off, and the paracord laces were way too long.
The other day, I did a poor job of fixing one end. The sheath of the paracord was much longer than the inside. If I'm honest, that paracord is plumb worn out. But it matches so well, I hate to replace it with something I have on hand that doesn't match properly.
*So Step 1 was to cut that excess sheath off:

Step 2 was to use the corkscrew to help untie the old knot:

Step 3 was to even out the lace length from right to left and tie a new knot. I forget what this knot is called, but it is pretty simple, and is my FAVORITE for joining two lengths of cord together:*

-
@Smaug said:
I just used my Spartan Lite to fix my sandal. It had these plastic things to tie the ends together, but I couldn't get one of them off, and the paracord laces were way too long.The other day, I did a poor job of fixing one end. The sheath of the paracord was much longer than the inside. If I'm honest, that paracord is plumb worn out. But it matches so well, I hate to replace it with something I have on hand that doesn't match properly.
*So Step 1 was to cut that excess sheath off:

Step 2 was to use the corkscrew to help untie the old knot:

Step 3 was to even out the lace length from right to left and tie a new knot. I forget what this knot is called, but it is pretty simple, and is my FAVORITE for joining two lengths of cord together:*

Nice work! And I'm fairly certain that's a sheet bend

-
Hello Guys.Im new to this amazing forum so hi to everyone.This is my first post , i use my Camper Ecoline to get this wires out from the cable.Im a huge fan of knives but till couple of weeks i never have a SAK one.But i start a work in one factory that is very dirty with alot of metal around me ,so i dont want to screw my good folders so i decied to get a SAK one just for work.... I dont know what to say guys i get this Camper Ecoline second hand from one Bulgarian knive forum and im just amazed how good is theese knives.I used it for alot of things and its just amazing i think that im kinda inlove in it.Now i can go outside without getting the SAK with me.I will buy one soon , i think i will buy a Helmsman because of the marlyn spike.This little fellas are just amazing.Love it even more then some of my big folders.Cheers guys

-
Welcome Petar! Let me welcome you with this mini-history of my beginnings in SAK-dom.
I went through a similar progression, though not quite in the same order.
-
At first, as a kid of maybe 9, I had just a small 2-bladed folder. (gift from my grandpa)
-
Later, as maybe an 11 year old, I got my first Swiss army knife, an Victorinox Ecoline Recruit. (also from my grandpa, who brought it back from Switzerland) At that time, I considered it too nice to actually use, and I saved it back. Is this where my obsession started?
-
A couple years later again, a family friend gave me a Small Tinker with black scales as a Christmas gift. Woo, I felt like I was in heaven. That one was the same size as the Ecoline Recruit, but had SO much more! That was the one with the Phillips contoured to fit the handles (good) but was split in the middle to use as a can key. (bad) It had toothpick, tweezers, keyring, Phillips, and awl, which I didn't have before. Best of all, now that I had two, I felt like I could carry one all the time. So I carried that Small Tinker for about 6 years before I finally lost it. :(
-
I immediately replaced it with another Tinker, this one a full size one. But it was not the same. Not quite such a "handy" size, and not really any more useful for the extra size it added. (several years later, they brought back the Small Tinker again, and I got one, but I don't think they make black scales in that size...)
-
A few years later, my mom's boyfriend got me an Explorer. It had (and still does!) the perfect tool set. But sadly, it was too big for my kid-sized pockets, and I didn't want to be nerdy with a belt pouch, (fashion was important in those years, hehehe) so I hardly carried it at all.
-
At about the same time, I discovered tactical folders. Started carrying a Spyderco Delica. It felt much stronger, and certainly faster to get open and closed. A bit more handy too, with its thinness and pocket clip. But you know, I immediately missed the tools of the SAK!
-
Bought a few more tactlcal folders anyway. ::)
-
Tried a Leatherman original; reasoning that the plier-based multi-tools should be more useful. I found that I hardly ever used the pliers, and the extra weight wasn't warranted. Also, the knife was not comfortable to use. Bought a few plier-based MTs anyway, thinking I could find the right one, maybe it would stick.
-
Tried classical American-style pocket knives. Why all these blades, and no tools? ???
-
Realized SAKs are my favorites. Bought too many of them. In my work life as an electrical technician, I used a Tinker, Soldier, and Super Tinker. The Super Tinker was my favorite; the scissors just added SO much functionality. The Tinker got the most years of service. The Soldier had the best flat head screwdriver; I used that even more than the knife blade, I think. I eventually missed a Phillips, so got the Super Tinker. Then, missed having the Phillips in-line, and went back to my old Explorer.
Depending on the kind of work you do, you might find a plier-based multi-tool to be more useful in the end, but I guess what I'm trying to say is that you may just find a good old Victorinox Swiss army knife to be the best daily companion you could possibly wish for. If you decide to "upgrade" later, do yourself a favor and keep that original one too. It will hold a special place in your heart, I think.
Again, welcome to MTo.

(Sorry for the wall of text, I hope you see it, buried in this thread!)
-
-
Thank you very much for the time you spended telling me that awesome story.Its a very amazing one , and i believe that this will not be my last one , and i will not stop carrying it even i bye a new one.Im preety sure that i will start collect them.Untill i get one i never know the advantage of this kind of knives.Yes is not like the big folders with good blades but as you say they are only blade and nothing else.Ive watched a several videos with people with big collection from their fathers and grandfathers and this is heart attacking videos just amazing how people threat these knives and how they keep it for a many many years.Im glad that i get one not very .Thank you for the good storie and for the inspiration:)
Today i just can`t stop using my Camper for this paracord Scorpion , i get the wire out of the cable , then cut some paracord , then making place to put my wire with the awl.Just a lovely sunday :)
P.S sorry for my bad English

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

